参数资料
型号: ADP1048DC1-EVALZ
厂商: Analog Devices Inc
文件页数: 78/84页
文件大小: 0K
描述: DAUGHTERCARD ADP1048
标准包装: 1
主要目的: 电源管理,功率因数校正
嵌入式:
已用 IC / 零件: ADP1048
次要属性: USB,I2C接口
已供物品:
ADP1047/ADP1048
VAC ADC OFFSET TRIM REGISTER
This register must be unlocked for write access; see Table 61.
Table 143. Register 0xFE53—VAC ADC Offset Trim
Data Sheet
Bits
[7:0]
Bit Name
VAC ADC offset trim
R/W
R/W
Description
This register calibrates the VAC ADC offset (the offset is always subtracted from the ADC output).
CS ADC OFFSET TRIM FOR 500 mV RANGE REGISTER
This register must be unlocked for write access; see Table 61.
Table 144. Register 0xFE54—CS ADC Offset Trim for 500 mV Range
Bits
[7:0]
Bit Name
CS ADC offset trim
R/W
R/W
Description
This register calibrates the CS current sense offset (the offset is always subtracted from the ADC
output).
CS ADC GAIN TRIM FOR HIGH (750 mV) RANGE REGISTER
This register must be unlocked for write access; see Table 61.
Table 145. Register 0xFE7E—CS ADC Gain Trim for High (750 mV) Range
Bits
7
Bit Name
Gain polarity
R/W
R/W
Description
1 = negative gain is introduced.
0 = positive gain is introduced.
[6:0]
CS ADC gain trim
R/W
This register calibrates the CS current sense gain.
CS ADC OFFSET TRIM FOR HIGH (750 mV) RANGE REGISTER
This register must be unlocked for write access; see Table 61.
Table 146. Register 0xFE7F—CS ADC Offset Trim for High (750 mV) Range
Bits
[7:0]
Bit Name
CS ADC offset trim
R/W
R/W
Description
This register calibrates the CS current sense offset (the offset is always subtracted from the ADC
output).
LATCHED FLAG REGISTERS
The bits in the latched flag registers remain set (latched) to allow users to detect an intermittent fault. Reading a latched flag register resets
the flags in that register.
Table 147. Register 0xFE80—Latched Fla g 0
Bits
7
6
5
4
3
Bit Name
MAX_MODULATION
MIN_MODULATION
OLP
FAST_OVP
AC_PERIOD
R/W
R
R
R
R
R
Description
1 = maximum modulation limit is reached.
1 = minimum modulation limit is reached.
1 = one of the two voltage dividers is probably disconnected or malfunctioning.
1 = the threshold set for the comparator on the OVP pin has been crossed.
1 = controller is not able to detect the ac line period; the maximum value of the period is used
and this flag is set.
2
1
0
BROWN_OUT
SOFT_START
INRUSH
R
R
R
1 = VAC is lower than the value stored in VIN_ON (Register 0x35).
1 = system is in soft start sequence; fast loop filter is in use.
1 = INRUSH control relay is off.
Rev. 0 | Page 78 of 84
相关PDF资料
PDF描述
CK2125R33M-T INDUCTOR .33UH LAYER 0805
6374110-6 C/A SM, LC TO LC 1METER
VE-J1Y-EZ-S CONVERTER MOD DC/DC 3.3V 16.5W
UPS2V2R2MPD1TD CAP ALUM 2.2UF 350V 20% RADIAL
H3BKH-4018M IDC CABLE - HSR40H/AE40M/HPK40H
相关代理商/技术参数
参数描述
ADP1048WARQZ-R7 功能描述:PFC IC Average Current 30kHz ~ 400kHz 24-QSOP 制造商:analog devices inc. 系列:- 包装:带卷(TR) 零件状态:有效 模式:平均电流 频率 - 开关:30kHz ~ 400kHz 电流 - 启动:- 电压 - 电源:3 V ~ 3.6 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:24-SSOP(0.209",5.30mm 宽) 供应商器件封装:24-QSOP 标准包装:1,000
ADP1050ACPZ-R7 功能描述:Power Supply Controller Power Supply Controller/Monitor 20-LFCSP-WQ (4x4) 制造商:analog devices inc. 系列:- 包装:剪切带(CT) 零件状态:有效 应用:电源控制器/监控器 电压 - 输入:0 V ~ 1.6 V 电压 - 电源:3 V ~ 3.6 V 电流 - 电源:28.5mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:20-WFQFN 裸露焊盘,CSP 供应商器件封装:20-LFCSP-WQ(4x4) 标准包装:1
ADP1050ACPZ-RL 功能描述:Power Supply Controller Power Supply Controller/Monitor 20-LFCSP-WQ (4x4) 制造商:analog devices inc. 系列:- 包装:带卷(TR) 零件状态:在售 应用:电源控制器/监控器 电压 - 输入:0 V ~ 1.6 V 电压 - 电源:3 V ~ 3.6 V 电流 - 电源:28.5mA 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:20-WFQFN 裸露焊盘,CSP 供应商器件封装:20-LFCSP-WQ(4x4) 标准包装:5,000
ADP1050DC1-EVALZ 功能描述:ADP1050 - Power Management, Digital Power Controller Evaluation Board 制造商:analog devices inc. 系列:- 零件状态:有效 主要用途:电源管理,数字电源控制器 嵌入式:- 使用的 IC/零件:ADP1050 主要属性:- 辅助属性:- 所含物品:板 标准包装:1
ADP1051 制造商:AD 制造商全称:Analog Devices 功能描述:Digital Controller for Isolated Power Supply with PMBus Interface