- 您现在的位置：买卖IC网 > PDF目录68990 > AP602-F (TRIQUINT SEMICONDUCTOR INC) 800 MHz - 2000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER PDF资料下载
参数资料
| 型号： | AP602-F |
| 厂商： | TRIQUINT SEMICONDUCTOR INC |
| 元件分类： | 放大器 |
| 英文描述： | 800 MHz - 2000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER |
| 封装： | 5 X 6 MM, ROHS COMPLIANT, SMT, DFN-14 |
| 文件页数： | 5/11页 |
| 文件大小： | 888K |
| 代理商： | AP602-F |
Specifications and information are subject to change without notice
WJ Communications, Inc
Phone 1-800-WJ1-4401 FAX: 408-577-6621 e-mail: sales@wj.com Web site: www.wj.com, www.TriQuint.com
Page 3 of 11 May 2007 ver 1
AP602
High Dynamic Range 4W 28V HBT Amplifier
Application Circuit PC Board Layout
PCB Material: 0.0147” Rogers Ultralam 2000, single layer, 1 oz Cu,
εr = 2.45, Microstrip line details: width = .042”, spacing = .050”
Baseplate Configuration
Notes:
1. Please note that for reliable operation, the evaluation board will have to be mounted to a much larger
heat sink during operation and in laboratory environments to dissipate the power consumed by the
device. The use of a convection fan is also recommended in laboratory environments.
2. The area around the module underneath the PCB should not contain any soldermask in order to
maintain good RF grounding.
3. For proper and safe operation in the laboratory, the power-on sequencing is recommended.
Evaluation Board Bias Procedure
Following bias procedure is recommended to ensure proper functionality of AP602 in a laboratory environment. The sequencing is not
required in the final system application.
Bias.
Voltage (V)
Vcc
+28
Vbias
+5
Vpd
+5
Turn-on Sequence:
1.
Attach input and output loads onto the evaluation board.
2.
Turn on power supply Vcc = +28V.
3.
Turn on power supply Vbias = +5V. At this point, the only current drawn by the device is leakage current (< 25A).
4.
Turn on power supply Vpd = +5V. Power supply Vcc should now be drawing typical Icq = 80 mA.
5.
Turn on RF power.
Turn-off Sequence:
1.
Turn off RF power.
2.
Turn off power supply Vpd = +5V.
3.
Turn off power supply Vbias = +5V.
4.
Turn off power supply Vcc = +28V.
Notes:
1.
Icq can be adjusted with the resistor R2 from the Vpd (+5V) supply and the PIN_VPD (pin14) of the amplifier. Increasing R2
results in a lower Icq. Icq should not be increased above 160mA.
2.
Vpd is used as a reference for the internal active bias circuitry. It can be used to turn on/off the amplifier. Ipd depends on the Icq
quiescent current setting. Ipd can be up to 4mA at a quiescent current setting of 160mA.
3.
Vbias should be maintained fixed at +5V. Ibias will change based on RF input power level. It can be up to 4mA on the AP602.
Ipd vs Icq
0
1
2
3
4
0
40
80
120
160
200
Icq Setting (mA)
Ip
d
(
m
A
)
Ibias vs Output Power
0
1
2
3
4
22
24
26
28
30
32
Output Average Power (dBm)
Ib
ia
s
(
m
A
)
相关PDF资料 |
PDF描述 |
|---|---|
| ARA05050S12CTR | 5 MHz - 100 MHz RF/MICROWAVE NARROW BAND HIGH POWER AMPLIFIER |
| ARA2017RS29P8 | 5 MHz - 85 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| AWAT6130M7P8 | 824 MHz - 849 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| AWAT6130RM7P8 | 824 MHz - 849 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
| AWT6241RM27Q7 | 1920 MHz - 1980 MHz RF/MICROWAVE NARROW BAND MEDIUM POWER AMPLIFIER |
相关代理商/技术参数 |
参数描述 |
|---|---|
| AP602-PCB1960 | 功能描述:射频开发工具 1930-1990MHz Brd 14.5dB Gain RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| AP602-PCB2140 | 功能描述:射频开发工具 2110-2170MHz Brd 13dB Gain RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| AP602-PCB900 | 功能描述:射频开发工具 869-960MHz Eval Brd 15.5dB Gain RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| AP603 | 制造商:WJCI 制造商全称:WJCI 功能描述:High Dynamic Range 7W 28V HBT Amplifier |
| AP-603 | 功能描述:AIR FILTRATION PANEL AP-603 制造商:3m 系列:Versaflo?，AP-600 零件状态:有效 类型:空气过滤面板 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。