参数资料
型号: AT73C224-A
厂商: Atmel
文件页数: 9/75页
文件大小: 0K
描述: IC PWR MGMT ANALOG PMAAC 32QFN
标准包装: 490
应用: 手持/移动设备
电源电压: 2.8 V ~ 5.25 V
工作温度: -40°C ~ 85°C
安装类型: 表面贴装
封装/外壳: 32-VFQFN 裸露焊盘
供应商设备封装: 32-QFN(5x5)
包装: 托盘
AT73C224
5. Detailed Description
The AT73C224-x is a family of Power Management Units with four power supplies and an ultra
low-power Real-time Clock.
By choosing a specific ordering code “x” from A to H, different automatic start-up sequences and
management modes can be selected.
The start-up sequence includes the order of power-on, as well as the default value of the power
supplies (see Section 5.2 ”Automatic Start-up Sequences and Shut-down” ). The user can after-
wards change this default value via SPI or TWI, if the dynamic mode has been chosen (see
5.1
Core
The core of the AT73C224-x device integrates the following blocks:
? Power-On-Reset for the backup battery.
? Internal switch and LDO dedicated to the backup battery. The output of the LDO_RTC is set
to 2.6V and the switch is on when the main battery higher than 2.8V (charge of the backup
battery).See Section 7.7 for electrical details.
? Real-Time-Clock digital bloc + 32 kHz oscillator.
? Power-On-Reset for the main battery.
? Voltage Monitor (VMON) of the main battery.
? Digital Power Management Control (PMC) for automatic start-up sequences. Digital output
POK indicates when start-up is completed, whereas ITB digital output signal informs the user
(typically the microcontroller) of a default in the DC/DCs (short-circuit) or too low main battery
value.
? TWI and SPI protocol blocs.
? DC/DC Step-up converter BOOST1: A 3.3V to 5.2V(100 mV step), 1A, asynchronous DC/DC
Step-up Converter available for overall system requirements. The DC/DC can be
implemented through proper external components in BUCK/BOOST (SEPIC) configuration.
The output voltage can be programmed via the internal registers. BOOST1 is supplied
directly by the battery.
? DC/DC Step-down converter BUCK2: A 0.9V to 3.4V, 500 mA fully integrated synchronous
PWM DC/DC Step-down Converter. The output voltage can be programmed via the internal
registers. A Pulse Skipping mode is available in order to improve efficiency at very light load
current values. In order to guarantee very low supply voltage functionality, the controller is
supplied by the max voltages between the main battery and the output of BOOST1 (VO1).
BUCK2 can be directly supplied by the battery or by the output of BOOST1.
? LDO3: A 1.3V, 1.5V to 1.8V (100 mV of step), 2.5V to 2.8V (100 mV of step), 3.3V, 200 mA –
Low Drop out regulators. The output voltage can be programmed via the internal registers.
LDO3 can work with supply from 1.8V up to 5.5V. This LDO can be supplied by the battery, by
the output of BOOST1, or by the output of BUCK2.
? LDO4: same functionality than LDO3.
? Main Bandgap: 1.18V reference voltage.
? 900 kHz Oscillator.
? Internal LDO (VINT) at 2.8V for internal supply.
9
6266A–PMAAC–08-Sep-08
相关PDF资料
PDF描述
GSC10DRYH CONN EDGECARD 20POS DIP .100 SLD
VLCF4028T-330MR61-2 INDUCTOR POWER 33UH .61A SMD
HBM22DRUN CONN EDGECARD 44POS .156 DIP SLD
A1AXH-2436M IDC CABLE - ASC24H/AE24M/X
M1CXA-2636R IDC CABLE - MKC26A/MC26M/X
相关代理商/技术参数
参数描述
AT73C224-B 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Power Management and Analog Companions (PMAAC)
AT73C224-C 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Power Management and Analog Companions (PMAAC)
AT73C224-D 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Power Management and Analog Companions (PMAAC)
AT73C224-E 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Power Management and Analog Companions (PMAAC)
AT73C224-EK1 功能描述:电源管理IC开发工具 AT73C224 EVALUATION KIT RoHS:否 制造商:Maxim Integrated 产品:Evaluation Kits 类型:Battery Management 工具用于评估:MAX17710GB 输入电压: 输出电压:1.8 V