参数资料
型号: AT90S8535-8PI
厂商: Atmel
文件页数: 39/127页
文件大小: 0K
描述: IC MCU 8K FLSH 8MHZ A/D IT 40DIP
标准包装: 18
系列: AVR® 90S
核心处理器: AVR
芯体尺寸: 8-位
速度: 8MHz
连通性: SPI,UART/USART
外围设备: 欠压检测/复位,POR,PWM,WDT
输入/输出数: 32
程序存储器容量: 8KB(4K x 16)
程序存储器类型: 闪存
EEPROM 大小: 512 x 8
RAM 容量: 512 x 8
电压 - 电源 (Vcc/Vdd): 4 V ~ 6 V
数据转换器: A/D 8x10b
振荡器型: 内部
工作温度: -40°C ~ 85°C
封装/外壳: 40-DIP(0.600",15.24mm)
包装: 管件
19
AT90S/LS8535
1041H–11/01
Status Register – SREG
The AVR Status Register (SREG) at I/O space location $3F ($5F) is defined as:
Bit 7 – I: Global Interrupt Enable
The global interrupt enable bit must be set (one) for the interrupts to be enabled. The
individual interrupt enable control is then performed in separate control registers. If the
global interrupt enable register is cleared (zero), none of the interrupts are enabled inde-
pendent of the individual interrupt enable settings. The I-bit is cleared by hardware after
an interrupt has occurred and is set by the RETI instruction to enable subsequent
interrupts.
Bit 6 – T: Bit Copy Storage
The bit copy instructions BLD (Bit LoaD) and BST (Bit STore) use the T-bit as source
and destination for the operated bit. A bit from a register in the register file can be copied
into T by the BST instruction and a bit in T can be copied into a bit in a register in the
register file by the BLD instruction.
Bit 5 – H: Half-carry Flag
The half-carry flag H indicates a half-carry in some arithmetic operations. See the
Instruction Set description for detailed information.
Bit 4 – S: Sign Bit, S = N
V
The S-bit is always an exclusive or between the negative flag N and the two’s comple-
ment overflow flag V. See the Instruction Set description for detailed information.
Bit 3 – V: Two’s Complement Overflow Flag
The two’s complement overflow flag V supports two’s complement arithmetics. See the
Instruction Set description for detailed information.
Bit 2 – N: Negative Flag
The negative flag N indicates a negative result from an arithmetical or logical operation.
See the Instruction Set description for detailed information.
Bit 1 – Z: Zero Flag
The zero flag Z indicates a zero result from an arithmetical or logic operation. See the
Instruction Set description for detailed information.
Bit 0 – C: Carry Flag
The carry flag C indicates a carry in an arithmetical or logical operation. See the Instruc-
tion Set description for detailed information.
Note that the Status Register is not automatically stored when entering an interrupt rou-
tine and restored when returning from an interrupt routine. This must be handled by
software.
Bit
7
6
543210
$3F ($5F)
I
T
H
S
V
N
Z
C
SREG
Read/Write
R/W
Initial Value
0
000000
相关PDF资料
PDF描述
AT90USB1287-16AUR IC MCU AVR 128K ISP USB TQFP64
AT90USB162-16AUR IC AVR MCU 16K FLASH 32TQFP
AT91FR40162SB-CU-999 IC MCU 32BIT RISC 121BGA
AT91M40800-33AI SL383 IC ARM MCU 16BIT 100TQFP
AT91M42800A-33CJ IC ARM7 MCU 144 BGA
相关代理商/技术参数
参数描述
AT90SA7-MLTU 功能描述:程序设计器 - 基于通用和内存 ASICS RoHS:否 制造商:Xeltek 产品:Universal Device Programmers 工具用于评估:EPROM, Parallel/Serial EEPROM, FPGA, PROM, Flash, BPROM, MCUs, PLD Devices 接口类型:Parallel, USB 工作电源电压:90 VAC to 250 VAC
AT90SC12036RU 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Secure Microcontroller for Smart Cards
AT90SC128112RU 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Secure Microcontroller for Smart Cards
AT90SC12836RCFT 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Secure Microcontrollers for Smart Cards
AT90SC12836RCFT_07 制造商:ATMEL 制造商全称:ATMEL Corporation 功能描述:Secure Microcontrollers for Smart Cards