参数资料
| 型号： | BD3522EFV-E2 |
| 厂商： | Rohm Semiconductor |
| 文件页数： | 21/21页 |
| 文件大小： | 0K |
| 描述： | IC REG LDO ADJ 4A HTSSOP-B20 |
| 标准包装： | 2,500 |
| 稳压器拓扑结构： | 正，可调式 |
| 输出电压： | 0.65 V ~ 2.7 V |
| 输入电压： | 0.7 V ~ 5.5 V |
| 稳压器数量： | 1 |
| 电流 - 输出： | 4A（最小） |
| 工作温度： | -10°C ~ 100°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 20-VSSOP（0.173"，4.40mm 宽） |
| 供应商设备封装： | 20-HTSSOP-B |
| 包装： | 带卷 (TR) |
Appendix
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the consent of ROHM
CO.,LTD.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter "Products"). If you
wish to use any such Product, please be sure to refer to the specifications, which can be obtained from ROHM
upon request.
Examples of application circuits, circuit constants and any other information contained herein illustrate the
standard usage and operations of the Products. The peripheral conditions must be taken into account when
designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document. However, should
you incur any damage arising from any inaccuracy or misprint of such information, ROHM shall bear no respon-
sibility for such damage.
The technical information specified herein is intended only to show the typical functions of and examples of
application circuits for the Products. ROHM does not grant you, explicitly or implicitly, any license to use or
exercise intellectual property or other rights held by ROHM and other parties. ROHM shall bear no responsibility
whatsoever for any dispute arising from the use of such technical information.
The Products specified in this document are intended to be used with general-use electronic equipment or
devices (such as audio visual equipment, office-automation equipment, communication devices, electronic
appliances and amusement devices).
The Products are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a Product may fail or
malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard against the
possibility of physical injury, fire or any other damage caused in the event of the failure of any Product, such as
derating, redundancy, fire control and fail-safe designs. ROHM shall bear no responsibility whatsoever for your
use of any Product outside of the prescribed scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or system
which requires an extremely high level of reliability the failure or malfunction of which may result in a direct
threat to human life or create a risk of human injury (such as a medical instrument, transportation equipment,
aerospace machinery, nuclear-reactor controller, fuel-controller or other safety device). ROHM shall bear no
responsibility in any way for use of any of the Products for the above special purposes. If a Product is intended
to be used for any such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may be controlled under
the Foreign Exchange and the Foreign Trade Law, you will be required to obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact your nearest sales office.
ROHM Customer Support System
www.rohm.com
THE AMERICAS / EUROPE / ASIA / JAPAN
Contact us : webmaster@ rohm.co. jp
Copyright ? 2008 ROHM CO.,LTD.
21 Saiin Mizosaki-cho, Ukyo-ku, Kyoto 615-8585, Japan
TEL : +81-75-311-2121
FAX : +81-75-315-0172
Appendix1-Rev3.0
相关PDF资料 |
PDF描述 |
|---|---|
| BD35231HFN-TR | IC REG LDO 1.2V 2A HSON8 |
| BD3572HFP-TR | IC REG LDO ADJ .5A HRP5 |
| BD3951F-E2 | IC REG LDO 5V .15A 8SOP |
| BD4153FV-E2 | IC PWR MGMT SWITCH 24SSOP |
| BD4154FV-E2 | IC POWER SWITCH SSOP-B20 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| BD35230HFN | 制造商:ROHM 制造商全称:Rohm 功能描述:Nch FET Ultra LDOs for Desktop PCs |
| BD35230HFN-TR | 功能描述:低压差稳压器 - LDO LDO Reg Pos 1V 2A RoHS:否 制造商:Texas Instruments 最大输入电压:36 V 输出电压:1.4 V to 20.5 V 回动电压（最大值）:307 mV 输出电流:1 A 负载调节:0.3 % 输出端数量: 输出类型:Fixed 最大工作温度:+ 125 C 安装风格:SMD/SMT 封装 / 箱体:VQFN-20 |
| BD35231HFN | 制造商:ROHM 制造商全称:Rohm 功能描述:Nch FET Ultra LDOs for Desktop PCs |
| BD35231HFN-TR | 功能描述:IC REG LDO 1.2V 2A HSON8 RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - 线性 系列:- 产品培训模块:More Information on LDOs 标准包装:50 系列:- 稳压器拓扑结构:正，固定式 输出电压:3.3V 输入电压:最高 15V 电压 - 压降（标准）:1.1V @ 800mA 稳压器数量:1 电流 - 输出:800mA 电流 - 限制（最小）:800mA 工作温度:0°C ~ 125°C 安装类型:表面贴装 封装/外壳:TO-263-4，D²Pak（3 引线+接片），TO-263AA 供应商设备封装:D2PAK-3 包装:管件 |
| BD3523HFN | 制造商:ROHM 制造商全称:Rohm 功能描述:Nch FET Ultra LDOs for Desktop PCs |
发布紧急采购，3分钟左右您将得到回复。