参数资料
型号: BR24L08FVJ-WE2
厂商: Rohm Semiconductor
文件页数: 17/41页
文件大小: 0K
描述: IC EEPROM 8KBIT 100KHZ TSSOP-B8J
标准包装: 2,500
格式 - 存储器: EEPROMs - 串行
存储器类型: EEPROM
存储容量: 8K (1K x 8)
速度: 400kHz
接口: I²C,2 线串口
电源电压: 1.8 V ~ 5.5 V
工作温度: -40°C ~ 85°C
封装/外壳: 8-VSSOP,8-MSOP(0.118",3.00mm 宽)
供应商设备封装: 8-TSSOP
包装: 带卷 (TR)
BR24L □□ -W Series,BR24S □□□ -W Series
Technical Note
In I C BUS, it is recommended that SDA port is of open drain input/output. However, when to use CMOS input / output of
● Cautions on microcontroller connection
Rs
2
tri state to SDA port, insert a series resistance Rs between the pull up resistance Rpu and the SDA terminal of EEPROM.
This is controls over current that occurs when PMOS of the microcontroller and NMOS of EEPROM are turned ON
simultaneously. Rs also plays the role of protection of SDA terminal against surge. Therefore, even when SDA port is
open drain input/output, Rs can be used.
ACK
SCL
R PU
R S
SDA
'H' output of microcontroller
'L' output of EEPROM
Microcontroller
EEPROM
Over current flows to SDA line by 'H'
output of microcontroller and 'L'
output of EEPROM.
Fig.53 I/O circuit diagram
Fig.54 Input / output collision timing
○ Maximum value of Rs
The maximum value of Rs is determined by the following relations.
(1)SDA rise time to be determined by the capacity (CBUS) of bus line of Rpu and SDA should be tR or below.
And AC timing should be satisfied even when SDA rise time is late.
(2)The bus electric potential A to be determined by Rpu and Rs the moment when EEPROM outputs 'L' to SDA bus
should sufficiently secure the input 'L' level (V IL ) of microcontroller including recommended noise margin 0.1Vcc.
V CC
R PU
A
(V CC - V OL )×R S
R PU +R S
+
V OL +0.1V CC ≦ V IL
R S
I OL
V OL
R S
V IL - V OL - 0.1V CC
1.1V CC - V IL
×
R PU
Bus line
capacity CBUS
Example) When V CC =3V, VIL=0.3V CC , V OL =0.4V, R PU =20k ?
V IL
Microcontroller
EEPROM
from(2),
R S
0.3×3 - 0.4 - 0.1×3
1.1×3 - 0.3×3
1.67 [ k ? ]
×
20×10 3
Fig.55 I/O circuit diagram
○ Minimum value of Rs
The minimum value of Rs is determined by over current at bus collision. When over current flows, noises in power source
line, and instantaneous power failure of power source may occur. When allowable over current is defined as I, the
following relation must be satisfied. Determine the allowable current in consideration of impedance of power source line
in set and so forth. Set the over current to EEPROM 10mA or below.
R PU
R S
'L' output
V CC
R S
R S
I
V CC
I
Over current Ⅰ
Example)When V CC =3V, I=10mA
10×10
'H' output
Microcontroller
EEPROM
R S
3
-3
300 [ ? ]
Fig.56 I/O circuit diagram
www.rohm.com
? 2009 ROHM Co., Ltd. All rights reserved.
17/40
2009.09 - Rev.D
相关PDF资料
PDF描述
BR24L04NUX-WTR IC EEPROM 4KBIT 100KHZ VSON8
BR24S08F-WE2 IC EEPROM 8KBIT 100KHZ SOP8
AGM40DTMD-S189 CONN EDGECARD 80POS R/A .156 SLD
AYM40DTBN-S189 CONN EDGECARD 80POS R/A .156 SLD
ASM40DTBN-S189 CONN EDGECARD 80POS R/A .156 SLD
相关代理商/技术参数
参数描述
BR24L08FVJ-WTR 制造商:ROHM 制造商全称:Rohm 功能描述:High Reliability Series EEPROMs I2C BUS
BR24L08FVM 制造商:未知厂家 制造商全称:未知厂家 功能描述:EEPROM
BR24L08FVM-W 制造商:ROHM 制造商全称:Rohm 功能描述:1024】8 bit electrically erasable PROM
BR24L08FVM-WE2 功能描述:IC EEPROM 8KBIT 400KHZ 8MSOP RoHS:是 类别:集成电路 (IC) >> 存储器 系列:- 标准包装:2,000 系列:- 格式 - 存储器:RAM 存储器类型:SRAM - 异步 存储容量:256K (32K x 8) 速度:15ns 接口:并联 电源电压:3 V ~ 3.6 V 工作温度:-40°C ~ 85°C 封装/外壳:28-TSSOP(0.465",11.8mm 宽) 供应商设备封装:28-TSOP 包装:带卷 (TR) 其它名称:71V256SA15PZGI8
BR24L08FVM-WTR 功能描述:电可擦除可编程只读存储器 SRL 1024X8 BIT RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8