参数资料
型号: DR-TRC103-915-EV
厂商: RFM
文件页数: 19/65页
文件大小: 0K
描述: BOARD EVALUATION 915MHZ RFM RFIC
标准包装: 1
类型: 收发器,SRR
频率: 902MHz ~ 928MHz
适用于相关产品: TRC103-915
已供物品: 2 个板,天线,电池
3.8 Buffered Clock Output
The buffered clock output is a signal derived from F XTAL . It can be used as a reference clock for the host microcon-
troller and is output on the CLKOUT pin. The OSCFG1B_Clkout_En[7] bit controls the CLKOUT pin. When this
bit is set to 1, CLKOUT is enabled, otherwise it is disabled. The output frequency of CLKOUT is defined by the
value of the OSCFG1B_Clk_freq[6..2] parameter which gives the frequency divider ratio applied to F XTAL . Refer
to Table 40 for programming details. Note: CLKOUT is disabled when the TRC103 is in sleep mode. If sleep
mode is used, the host microcontroller must have provisions to run from its own clock source.
3.9 Packet Data Modes
The TRC103 provides optional on-chip RX and TX packet handling features. These features ease the develop-
ment of packet oriented wireless communication protocols and free the MCU resources for other tasks. The op-
tions include enabling protocols based on fixed and variable packet lengths, data scrambling, CRC checksum cal-
culations, and received packet filtering. All the programmable parameters of the packet handler are accessible
through the PKTCFG configuration registers of the device. The packet handling mode is enabled when the regis-
ter bit MCFG01_Packet_Hdl_En[2] is set to 1.
The packet handler supports three types of packet formats: fixed length packets, variable length packets, and ex-
tended variable length packets. The PKTCFG1E_Pkt_mode[7] bit selects either the fixed or the variable length
packet formats.
3.9.1 Fixed Length Packet Mode
The fixed length packet mode is selected by setting the PKTCFG1E_Pkt_mode[7] bit to 0. In this mode the
length of the packet is set by the PKTCFG1C_Pkt_len[6..0] register up to the size of the FIFO which has been
selected. The length stored in this register is the length of the payload which includes the message data bytes
and optional address byte. The fixed length packet format shown in Figure 13 is made up of the following fields:
1. Preamble
2. Start pattern (network address)
3. Node address byte (optional)
4. Data bytes
5. Two-byte CRC checksum (optional)
F ix e d L e n g th P a c k e t F o r m a t
M a n c h e s te r E n c o d in g o r S c r a m b lin g A p p lie d to th e s e B y te s
P r e a m b le
1 to 4 B y te s
S ta rt P a tte rn
(N e tw o rk A d d re s s )
1 to 4 B y te s
O p tio n a l
N o d e
A d d re s s
B y te
D a ta B y te s
C R C
2 B y te s
P a y lo a d B y te s = P K T C F G 1 C _ P k t_ le n [6 ..0 ]
M a x im u m L e n g th = F IF O L e n g th
T h e P r e a m b le , S ta r t P a tte r n a n d C R C b y te s a r e a d d e d to th e p a c k e t b y th e T R C 1 0 3 d u r in g tr a n s m it a n d r e m o v e d fr o m
Figure 13
th e p a c k e t d u r in g r e c e iv e .
www.RFM.com E-mail: info@rfm.com
? 2009-2010 by RF Monolithics, Inc.
Technical support +1.800.704.6079
Page 19 of 65
TRC103 - 11/29/12
相关PDF资料
PDF描述
DR-TRC103-868-EV BOARD EVALUATION 868MHZ RFM RFIC
TC70N6C32K7680 OSCILLATOR 32.7680 KHZ 2.5V SMD
TC70N3A32K7680 OSCILLATOR 32.7680 KHZ 2.5V SMD
TC70L3C32K7680 OSCILLATOR 32.7680 KHZ 3.3V SMD
EK64905-01 KIT EVAL FOR 64904 NO CABLES
相关代理商/技术参数
参数描述
DR-TRC103-950-DK 功能描述:KIT DEV 950MHZ RFIC SRR RoHS:否 类别:RF/IF 和 RFID >> RF 评估和开发套件,板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796
DR-TRC103-950-EV 功能描述:BOARD EVALUATION 950MHZ RFM RFIC RoHS:否 类别:RF/IF 和 RFID >> RF 评估和开发套件,板 系列:- 标准包装:1 系列:- 类型:GPS 接收器 频率:1575MHz 适用于相关产品:- 已供物品:模块 其它名称:SER3796
DR-TRC104-2400-DK 功能描述:射频开发工具 TRC104 Development Kit 2.4 GHz RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V
DR-TRC104-2400-EV 制造商:RFM 功能描述:BOARD EVALUATION 2.4GHZ RFM RFIC
DR-TRC105-304-DK 功能描述:射频开发工具 TRC105 Development Kit 303-307 MHz RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V