- 您现在的位置：买卖IC网 > PDF目录18713 > DR-TRC105-304-EV (RFM)BOARD EVALUATION 304MHZ RFM RFIC PDF资料下载
参数资料
| 型号： | DR-TRC105-304-EV |
| 厂商： | RFM |
| 文件页数： | 59/67页 |
| 文件大小： | 0K |
| 描述： | BOARD EVALUATION 304MHZ RFM RFIC |
| 标准包装： | 1 |
| 类型： | 收发器 |
| 频率： | 303.325MHz ~ 307.3MHz |
| 适用于相关产品： | TRC105 |
| 已供物品： | 2 个板，天线，电池 |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页当前第59页第60页第61页第62页第63页第64页第65页第66页第67页
8. In transmit mode, IRQ0 will flag when the FIFO is empty.
9. Set IRQCFG0D bit 3 to 1. IRQ1 will flag when the last bit starts to be transmitted.
10. Load the operating frequency into register set MCFG06 - MCFG08 or MCFG09 - MCFG0B.
11. Select the register set to use by setting MCFG05 bit 0. A 0 value selects register set MCFG06 - MCFG08
and a 1 value selects register set MCFG09 - MCFG0B .
12. When ready to transmit, place the TRC105 in synthesizer mode by setting MCFG00 bits 7..5 to 010. Mon-
itor the TRC105 Pin 23 to confirm PLL lock.
13. Place TRC105 in transmit mode by setting MCFG00 bits 7..5 set to 100.
14. Load the message in the FIFO through the SPI port. In Buffered data mode, the transmitted message
must include the 1-0-1- 0… training preamble, the start pattern and the data. A length byte at the begi n-
ning of the data or a designated end-of-message character is normally used to indicate message length.
15. Monitor IRQ1. It sets when the when the last bit starts to be transmitted. Allow one bit period for the last
bit to be transmitted and then switch to standby mode by setting MCFG00 bits 7..5 to 001.
16. To prepare for receive mode, write a 1 to IRQCFG0E bit 6. This arms the start pattern detection.
17. Switch the TRC105 from standby mode to synthesizer mode by setting MCFG00 bits 7..5 set to 010.
Monitor the TRC105 Pin 23 to confirm PLL lock.
18. Switch from synthesizer mode to receive mode by setting MCFG00 bits 7..5 to 011.
19. Following a start pattern detection, the FIFO will start filling. Note that the preamble and start pattern are
not loaded in the receive FIFO.
20. As each data byte is loaded into the FIFO, IRQ0 will pulse to alert the host microcontroller to retrieve
the byte.
21. The host microcontroller can use a countdown on the length byte or detection of the end-of-message byte
to determine when all of the message data has been retrieved.
22. As soon as all the message has been retrieved, switch the TRC105 to standby mode by setting MCFG00
bits 7..5 to 001.
23. From standby mode, enter another transmit cycle as outlined in steps 12 through 15, or enter another re-
ceive cycle as outlined in steps 16 through 23.
It is possible to transmit messages longer than the FIFO in Buffered data mode by monitoring the nFIFOEMPY
flag and immediately loading additional data bytes. However, messages sent by low power radios such as the
TR103 are normally 127 bytes or less to reduce the chances of corruption due to noise, fading or interference.
6.6.3 Packet Data Mode
The Packet data mode is built on top of the Buffered data mode, and adds a number of standard and optional fea-
tures:
?
?
?
?
?
Fixed or variable length packet options
Generation of preamble and start pattern (network ID) in transmit mode
DC-balancing of data by scrambling (whitening) or Manchester encoding
Generation of a 16-bit error detection CRC
Optional 1-byte node address and/or 1-byte length address
www.RFM.com E-mail: info@rfm.com
? 2009-2013 by RF Monolithics, Inc.
Technical support +1.800.704.6079
Page 59 of 67
TRC105 - 05/29/13
相关PDF资料 |
PDF描述 |
|---|---|
| GSCA06S2 | SWITCH ROTARY SIDE |
| DR-TRC103-950-EV | BOARD EVALUATION 950MHZ RFM RFIC |
| DR-TRC103-915-EV | BOARD EVALUATION 915MHZ RFM RFIC |
| DR-TRC103-868-EV | BOARD EVALUATION 868MHZ RFM RFIC |
| TC70N6C32K7680 | OSCILLATOR 32.7680 KHZ 2.5V SMD |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DR-TRC105-315-DK | 功能描述:射频开发工具 TRC105 Development Kit 310-319 MHz RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| DR-TRC105-315-EV | 功能描述:射频开发工具 TRC105 Evaluation Board 310-319 MHz RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| DR-TRC105-345-DK | 功能描述:射频开发工具 TRC105 Development Kit 342-348 MHz RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| DR-TRC105-345-EV | 功能描述:射频开发工具 TRC105 Evaluation Board 342-348 MHz RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
| DR-TRC105-372-DK | 功能描述:射频开发工具 TRC105 Development Kit 365-381 MHz RoHS:否 制造商:Taiyo Yuden 产品:Wireless Modules 类型:Wireless Audio 工具用于评估:WYSAAVDX7 频率: 工作电源电压:3.4 V to 5.5 V |
发布紧急采购，3分钟左右您将得到回复。