参数资料
型号: DS1075M-60
厂商: MAXIM INTEGRATED PRODUCTS INC
元件分类: XO, clock
英文描述: 60 MHz, OTHER CLOCK GENERATOR, PDIP8
封装: 0.300 INCH, DIP-8
文件页数: 3/18页
文件大小: 251K
代理商: DS1075M-60
DS1075
11 of 18
HARDWARE
The hardware configuration is shown in the diagram. A bus master is used to read and write data to the
DS1075’s internal registers. The bus master may have either an open-drain or TTL-type architecture.
Figure 11
Programming mode is entered by simply powering up the DS1075 with a pull-up of approximately 5K
W.
This will pull the IN/OUT pin above VIH on power-up and initiate the programming mode, causing the
DS1075 to internally release the IN/OUT pin (after tPOR), and allow the pull-up resistor to pull the pin to
the supply rail and await the Master Tx Reset pulse (see diagram).
NOTE:
To ensure normal operation any external pull-up applied to IN/OUT must be greater than 20K
W in value.
This will cause the IN/OUT pin to remain below VIH on power-up, resulting in normal operation at the
end of tSTAB.
Figure 12
相关PDF资料
PDF描述
DS1233Z-10N 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO4
DS1283SN 1 TIMER(S), REAL TIME CLOCK, PDSO28
DS1543W-120 0 TIMER(S), REAL TIME CLOCK, PDIP28
DS1644L-15 0 TIMER(S), REAL TIME CLOCK, DSO34
DS1706RESA+T&R 3.3 and 5.0 Volt MicroMonitor
相关代理商/技术参数
参数描述
DS1075M-60IND 制造商:未知厂家 制造商全称:未知厂家 功能描述:Oscillator/Divider
DS1075M-60N 功能描述:可编程振荡器 RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装:
DS1075M-66 功能描述:可编程振荡器 RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装:
DS1075M-66IND 制造商:未知厂家 制造商全称:未知厂家 功能描述:Oscillator/Divider
DS1075M-66N 功能描述:可编程振荡器 RoHS:否 制造商:IDT 封装 / 箱体:5 mm x 7 mm x 1.5 mm 频率:15.476 MHz to 866.67, 975 MHz to 1300 MHz 频率稳定性:+/- 50 PPM 电源电压:3.63 V 负载电容:10 pF 端接类型:SMD/SMT 输出格式:LVPECL 最小工作温度:- 40 C 最大工作温度:+ 85 C 尺寸:7 mm W x 5 mm L x 1.5 mm H 封装: