参数资料
型号: DS1923-F5#
厂商: Maxim Integrated
文件页数: 19/55页
文件大小: 0K
描述: IBUTTON TEMP/HUMIDITY LOGGER F5
产品培训模块: Lead (SnPb) Finish for COTS
Obsolescence Mitigation Program
RoHS指令信息: IButton RoHS Compliance Plan
标准包装: 5
系列: iButton®
存储容量: 512B
存储器类型: NVSRAM(非易失 SRAM)
产品目录页面: 1431 (CN2011-ZH PDF)
DS1923
iButton Hygrochron Temperature/Humidity
Logger with 8KB Data-Log Memory
Latest Humidity Conversion Result Register Bitmap
ADDRESS
020Eh
020Fh
BIT 7
H3
H11
BIT 6
H2
H10
BIT 5
H1
H9
BIT 4
H0
H8
BIT 3
X
H7
BIT 2
X
H6
BIT 1
X
H5
BIT 0
X
H4
BYTE
HRL
HRH
During a mission, if humidity logging is enabled, the
HRH byte (H11 to H4) is always recorded. The HRL
byte is only recorded if the DS1923 is set up for 16-bit
humidity logging. The logging mode (8-bit or 16-bit) is
selected through the HLFS bit at the Mission Control
register, address 0213h.
16-BIT MODE, HLFS = 1
IVAL = (HRH x 256 + HRL)/16
Round IVAL down to the nearest integer; this eliminates the
undefined 4 bits of HRL.
ADVAL = IVAL x 5.02/4096
With HRH and HRL representing the decimal equivalent
of a humidity reading, the actual humidity is calculated
according to the algorithms shown in the table below.
8-BIT MODE, HLFS = 0
(N/A)
ADVAL = HRH x 5.02/256
HUMIDITY(%RH) = (ADVAL - 0.958)/0.0307
The result is a raw humidity reading that needs to be
corrected to achieve the specified accuracy. See the
Software Correction Algorithm for Humidity section for
further details.
To specify the humidity alarm thresholds, the equation
needs to be resolved to:
ADVAL = HUMIDITY(%RH) x 0.0307 + 0.958
HALM = ADVAL x 256/5.02
Round HALM to the nearest integer.
The HALM value needs to be converted into hexadeci-
mal before it can be written to one of the Humidity Alarm
Threshold registers (Low Alarm address 020Ah; High
Alarm address 020Bh). Independent of the conversion
Table 3. Humidity Conversion Examples
mode (8-bit or 16-bit), only the most significant byte of a
humidity conversion is used to determine whether an
alarm is generated. The alarm thresholds are applied to
the raw humidity readings. Therefore, if software correc-
tion is used, the effect of the software correction is to be
reversed before calculating a humidity alarm threshold.
For example, let the desired alarm threshold be 60%RH.
The 60% threshold may correspond to a raw reading of
65%RH (i.e., before correction). To set a 60%RH (after
correction) threshold, the HALM value then needs to be
calculated for 65%RH.
These examples do not include the effects of software
correction.
MODE
HEX
HRH
DECIMAL
HEX
HRL
DECIMAL
HUMIDITY (%RH)
8-bit
8-bit
B5h
67h
181
103
84.41
34.59
16-bit
16-bit
B5h
67h
181
103
C0h
30h
192
48
84.89
34.70
Table 4. Humidity Alarm Threshold Examples
HUMIDITY (%RH)
65
25
Maxim Integrated
HEX
97h
58h
HALM
DECIMAL
151
88
19
相关PDF资料
PDF描述
DS1961S-F3# IBUTTON EEPROM 1KBit F3
DS1963S-F5+ IBUTTON MONETARY SHA-1
DS1971-F3+ IBUTTON EEPROM 256KBIT F3
DS1972-F3+ IBUTTON EEPROM 1KBit F3
DS1973-F3+ IBUTTON EEPROM 4KBit F3
相关代理商/技术参数
参数描述
DS1923-F5# 功能描述:iButton Hygrochron Temp/Hum Logger w/8KB DataLog RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1923-F5#W 功能描述:iButton Hygrochron Temp/Hum Logger w/8KB DataLog RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS1923-F5+ 功能描述:iButton RoHS:否 存储类型:SRAM 存储容量:512 B 组织: 工作电源电压:3 V to 5.25 V 接口类型:1-Wire 最大工作温度:+ 85 C 尺寸:17.35 mm x 5.89 mm 封装 / 箱体:F5 MicroCan 制造商:Maxim Integrated
DS19310 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:Color TV Owners Manual Manuel dinstructions du teleouleur Color TV Manual Del Propietario
DS193-K 制造商:Miyama Electric 功能描述: