参数资料
| 型号： | DS2430A+T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 6/19页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 256BIT TO92-3 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,000 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 256（32 x 8） |
| 接口： | 1 线 串行 |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | TO-226-3、TO-92-3（TO-226AA）成形引线 |
| 供应商设备封装： | TO-92-3 |
| 包装： | 带卷 (TR) |
MEMORY FUNCTION FLOW CHART Figure 6
DS2430A
COPY SCRATCHPAD [55h]
After the data stored in the scratchpad has been verified the master may send the Copy Scratchpad
command followed by a validation key of A5h to transfer data from the scratchpad to the EEPROM
memory. This command always copies the data of the entire scratchpad. Therefore, if one desires to
change only a few bytes of the EEPROM data, the scratchpad should contain a copy of the latest
EEPROM data before the Write Scratchpad and Copy Scratchpad commands are issued. After this
command and the validation key are issued, the data line must be held above V PUPmin for at least t PROG .
READ MEMORY [F0h]
The Read Memory command is used to read a portion or all of the EEPROM data memory and to copy
the entire data memory into the scratchpad to prepare for changing a few bytes. To copy data from the
data memory to the scratchpad and to read it, the master must issue the read memory command followed
by the 1-byte starting address of the data to be read from the scratchpad. The DS2430A automatically
increments the address after every byte read by the master. After the data of address 1Fh has been read,
the address counter wraps around to 00h for the next byte and reading continues until the master sends a
Reset Pulse. If one intends to copy the entire data memory to the scratchpad without reading data, a
starting address is not required; the master may send a Reset Pulse immediately following the command
code.
6 of 19
相关PDF资料 |
PDF描述 |
|---|---|
| AYF534865 | CONN SOCKET FPC 0.5MM 48POS SMD |
| DS2502G+U | IC ADD-ONLY MEMORY 1KB SFN |
| DS2502G+T&R | IC OTP 1KBIT 2SFN |
| DS2502P+T&R | IC OTP 1KBIT 6TSOC |
| DS2502+T&R | IC OTP 1KBIT TO92-3 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2430AV | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:256-Bit 1-Wire EEPROM |
| DS2430AX | 功能描述:电可擦除可编程只读存储器 RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| DS2430AX#T&R | 功能描述:电可擦除可编程只读存储器 RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| DS2430AX#U | 功能描述:电可擦除可编程只读存储器 RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| DS2430AX-S | 功能描述:电可擦除可编程只读存储器 RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
发布紧急采购，3分钟左右您将得到回复。