参数资料
| 型号： | DS2430A+T&R |
| 厂商： | Maxim Integrated Products |
| 文件页数： | 7/19页 |
| 文件大小： | 0K |
| 描述： | IC EEPROM 256BIT TO92-3 |
| 产品培训模块： | Lead (SnPb) Finish for COTS Obsolescence Mitigation Program |
| 标准包装： | 2,000 |
| 格式 - 存储器： | EEPROMs - 串行 |
| 存储器类型： | EEPROM |
| 存储容量： | 256（32 x 8） |
| 接口： | 1 线 串行 |
| 工作温度： | -40°C ~ 85°C |
| 封装/外壳： | TO-226-3、TO-92-3（TO-226AA）成形引线 |
| 供应商设备封装： | TO-92-3 |
| 包装： | 带卷 (TR) |
MEMORY FUNCTION FLOW CHART Figure 6 (continued)
DS2430A
WRITE APPLICATION REGISTER [99h]
This command is essentially the same as the Write Scratchpad command, but it addresses the 64-bit
register scratchpad. After issuing the command code, the master must provide a 1-byte address, followed
by the data to be written. The DS2430A automatically increments the address after every byte it receives.
After receiving the data byte for address 07h, the address counter wraps around to 00h for the next byte
and writing continues until the master sends a Reset Pulse. The Write Application Register command can
be used as long as the application register has not yet been locked. If issued for a device with the
application register locked, the data written to the register scratchpad will be lost.
READ STATUS REGISTER [66h]
The status register is a means for the master to find out whether the application register has been
programmed and locked. After issuing the read status register command, the master must provide the
validation key 00h before receiving status information. The two least significant bits of the 8-bit status
register are 0 if the application register was programmed and locked; all other bits always read 1. The
master may finish the read status command by sending a Reset Pulse at any time.
7 of 19
相关PDF资料 |
PDF描述 |
|---|---|
| AYF534865 | CONN SOCKET FPC 0.5MM 48POS SMD |
| DS2502G+U | IC ADD-ONLY MEMORY 1KB SFN |
| DS2502G+T&R | IC OTP 1KBIT 2SFN |
| DS2502P+T&R | IC OTP 1KBIT 6TSOC |
| DS2502+T&R | IC OTP 1KBIT TO92-3 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| DS2430AV | 制造商:DALLAS 制造商全称:Dallas Semiconductor 功能描述:256-Bit 1-Wire EEPROM |
| DS2430AX | 功能描述:电可擦除可编程只读存储器 RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| DS2430AX#T&R | 功能描述:电可擦除可编程只读存储器 RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| DS2430AX#U | 功能描述:电可擦除可编程只读存储器 RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
| DS2430AX-S | 功能描述:电可擦除可编程只读存储器 RoHS:否 制造商:Atmel 存储容量:2 Kbit 组织:256 B x 8 数据保留:100 yr 最大时钟频率:1000 KHz 最大工作电流:6 uA 工作电源电压:1.7 V to 5.5 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:SOIC-8 |
发布紧急采购，3分钟左右您将得到回复。