参数资料
型号: ICS1562BM-201T
厂商: IDT, Integrated Device Technology Inc
文件页数: 10/20页
文件大小: 0K
描述: IC VIDEO CLK SYNTHESIZER 16-SOIC
产品变化通告: Product Discontinuation 13/May/2009
标准包装: 2,500
类型: 时钟/频率合成器,时钟发生器,扇出配送
PLL:
输入: CMOS,TTL,晶体
输出: CMOS,PECL
电路数: 1
比率 - 输入:输出: 1:3
差分 - 输入:输出: 无/是
频率 - 最大: 260MHz
除法器/乘法器: 是/是
电源电压: 4.75 V ~ 5.25 V
工作温度: 0°C ~ 70°C
安装类型: 表面贴装
封装/外壳: 16-SOIC(0.154",3.90mm 宽)
供应商设备封装: 16-SOIC
包装: 带卷 (TR)
其它名称: 1562BM-201T
ICS1562B Application Information
Output Circuit Considerations for the ICS1562B
Output Circuitry
The dot clock signals CLK and CLK- are typically the highest
frequency signals present in the workstation. To minimize
problems with EMI, crosstalk, and capacitive loading extra
care should be taken in laying out this area of the PC board.
The ICS1562B is packaged in a 0.2”-wide 16-pin SOIC pack-
age. This permits the clock generator, crystal, and related
components to be laid out in an area the size of a postage stamp.
The ICS1562B should be placed as close as possible to the
RAMDAC. The CLK and CLK- pins are running at VHF
frequencies; one should minimize the length of PCB trace
connecting them to the RAMDAC so that they don’t become
radiators of RF energy.
At the frequencies that the ICS1562B is capable of, PC board
traces may be long enough to be a significant portion of a
wavelength of that frequency. PC traces for CLK and CLK-
should be treated as transmission lines, not just interconnecting
wires. These lines can take two forms: microstrip and stripline.
A microstrip line is shown below:
Essentially, the microstrip is a copper trace on a PCB over a
ground plane. Typically, the dielectric is G10 glass epoxy. It
differs from a standard PCB trace in that its width is calculated
to have a characteristic impedance. To calculate the charac-
teristic impedance of a microstrip line one must know the width
and thickness of the trace, and the thickness and dielectric
constant of the dielectric. For G10 glass epoxy, the dielectric
constant (er) is about 5. Propagation delay is strictly a function
of dielectric constant. For G10 propagation, delay is calculated
to be 1.77 ns/ft.
Stripline is the other form a PCB transmission line can take. A
buried trace between ground planes (or between a power plane
and a ground plane) is common in multi-layer boards.
Attempting to create a workstation design without the use of
multi-layer boards would be adventurous to say the least, the
issue would more likely be whether to place the interconnect
on the surface or between layers. The between layer approach
would work better from an EMI standpoint, but would be more
difficult to lay out. A stripline is shown below:
Using 1 oz. copper (0.0015” thick) and 0.040” thickness G10,
a 0.010” trace will exhibit a characteristic impedance of 75
in a stripline configuration.
Typically, RAMDACs require a Vih of VAA-1.0 Volts as a
guaranteed logical “1” and a Vil of VAA-1.6 as a guaranteed
logical “0.” Worst case input capacitance is 10 pF.
Output circuitry for the ICS1562B is shown in the following
diagram. It consists of a 4/1 current mirror, and two open drain
output FETs along with inverting buffers to alternately enable
each current-sinking driver. Both CLK and CLK- outputs are
connected to the respective CLOCK and CLOCK inputs of the
RAMDAC with transmission lines and terminated in their
equivalent impedances by the Thevenin equivalent impedances
of R1 and R2 or R1’ and R2’.
18
相关PDF资料
PDF描述
ICS1574BMT IC CLOCK GEN PROGR LASER 16-SOIC
ICS180M-01LF IC CLOCK GEN LOW EMI 8-SOIC
ICS181M-02LF IC CLOCK GEN LOW EMI 8-SOIC
ICS181M-03LF IC CLOCK GEN LOW EMI 8-SOIC
ICS181M-51LF IC CLOCK GEN LOW EMI 8-SOIC
相关代理商/技术参数
参数描述
ICS1562BM-XXX 制造商:ICS 制造商全称:ICS 功能描述:User Programmable Differential Output Graphics Clock Generator
ICS1567 制造商:ICS 制造商全称:ICS 功能描述:Differential Output Video Dot Clock Generator
ICS1567-742 制造商:ICS 制造商全称:ICS 功能描述:Differential Output Video Dot Clock Generator
ICS1567M-742 制造商:未知厂家 制造商全称:未知厂家 功能描述:Video/Graphics Clock Generator
ICS1572 制造商:ICS 制造商全称:ICS 功能描述:User Programmable Differential Output Graphics Clock Generator