参数资料
型号: IDT82V2088BB
厂商: IDT, Integrated Device Technology Inc
文件页数: 38/78页
文件大小: 0K
描述: IC LIU T1/J1/E1 8CH 208-BGA
标准包装: 10
类型: 线路接口装置(LIU)
规程: E1
电源电压: 3.13 V ~ 3.47 V
安装类型: 表面贴装
封装/外壳: 208-BGA
供应商设备封装: 208-PBGA(17x17)
包装: 托盘
其它名称: 82V2088BB
43
INDUSTRIAL
TEMPERATURE RANGES
OCTAL CHANNEL T1/E1/J1 LONG HAUL/SHORT HAUL LINE INTERFACE UNIT
4.2.4
RECEIVE PATH CONTROL REGISTERS
Table-35 TCF3: Transmitter Configuration Register 3
(R/W, Address = 05H,25H,45H,65H,85H,A5H,C5H,E5H)
Symbol
Bit
Default
Description
DONE
7
0
After ‘1’ is written to this bit, a read or write operation is implemented.
RW
6
0
This bit selects read or write operation
= 0: write to RAM
= 1: read from RAM
UI[1:0]
5-4
00
These bits specify the unit interval address. There are 4 unit intervals.
= 00: UI address is 0 (The most left UI)
= 01: UI address is 1
= 10: UI address is 2
= 11: UI address is 3
SAMP[3:0]
3-0
0000
These bits specify the sample address. Each UI has 16 samples.
= 0000: sample address is 0 (The most left Sample)
= 0001: sample address is 1
= 0010: sample address is 2
......
= 1110: sample address is 14
= 1111: sample address is 15
Table-36 TCF4: Transmitter Configuration Register 4
(R/W, Address = 06H,26H,46H,66H,86H,A6H,C6H,E6H)
Symbol
Bit
Default
Description
-7
0
Reserved
WDAT[6:0]
6-0
0000000
In Indirect Write operation, the WDAT[6:0] will be loaded to the pulse template RAM, specifying the amplitude of
the Sample.
After an Indirect Read operation, the amplitude data of the Sample in the pulse template RAM will be output to the
WDAT[6:0].
Table-37 RCF0: Receiver Configuration Register 0
(R/W, Address = 07H,27H,47H,67H,87H,A7H,C7H,E7H)
Symbol
Bit
Default
Description
-
7-5
000
Reserved
R_OFF
4
0
Receiver power down enable
= 0: Receiver power up
= 1: Receiver power down
RD_INV
3
0
Receive data invert
= 0: data on RDn or RDPn/RDNn is active high
= 1: data on RDn or RDPn/RDNn is active low
RCLK_SEL
2
0
Receive clock edge select (this bit is ignored in slicer mode)
= 0: data on RDn or RDPn/RDNn is updated on the rising edges of RCLKn
= 1: data on RDn or RDPn/RDNn is updated on the falling edges of RCLKn
R_MD[1:0]
1-0
00
Receiver path decoding selection
= 00: receive data is HDB3 (E1) / B8ZS (T1/J1) decoded and output on RDn with single rail NRZ format
= 01: receive data is AMI decoded and output on RDn with single rail NRZ format
= 10: decoder is bypassed, re-timed dual rail data with NRZ format output on RDPn/RDNn (dual rail mode with
clock recovery)
= 11: both CDR and decoder blocks are bypassed, slicer data with RZ format output on RDPn/RDNn (slicer mode)
相关PDF资料
PDF描述
IDT72V263L7-5PF IC FIFO 8192X18 7-5NS 80QFP
V48B15M250BG2 CONVERTER MOD DC/DC 15V 250W
IDT82V2088BBG IC LINE INTERFACE UNIT 208-PBGA
V48B15M250BF3 CONVERTER MOD DC/DC 15V 250W
IDT72V263L10PFI IC FIFO 8192X18 10NS 80QFP
相关代理商/技术参数
参数描述
IDT82V2088BBG 功能描述:IC LINE INTERFACE UNIT 208-PBGA RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP(0.173",4.40mm 宽) 供应商设备封装:16-TSSOP 包装:带卷 (TR)
IDT82V2088DR 功能描述:IC LIU T1/J1/E1 8CH 208-TQFP RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP(0.173",4.40mm 宽) 供应商设备封装:16-TSSOP 包装:带卷 (TR)
IDT82V2088DRG 功能描述:IC LIU T1/J1/E1 8CH 208-TQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:250 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-TSSOP(0.173",4.40mm 宽) 供应商设备封装:16-TSSOP 包装:带卷 (TR)
IDT82V2108 制造商:IDT 制造商全称:Integrated Device Technology 功能描述:T1 / E1 / J1 OCTAL FRAMER
IDT82V2108BB 功能描述:IC FRAMER T1/J1/E1 8CH 144-BGA RoHS:否 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN(6x6) 包装:* 其它名称:Q6396337A