参数资料
型号: IS80C52CXXX-16:RD
厂商: ATMEL CORP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 16 MHz, MICROCONTROLLER, PQCC44
封装: PLASTIC, LCC-44
文件页数: 49/134页
文件大小: 3805K
21
8068U–AVR–06/2013
XMEGA A3
Not recommended for new designs -
Use XMEGA A3U series
11. Power Management and Sleep Modes
11.1
Features
5 sleep modes
–Idle
– Power-down
– Power-save
– Standby
– Extended standby
Power Reduction registers to disable clocks to unused peripherals
11.2
Overview
The XMEGA A3 provides various sleep modes tailored to reduce power consumption to a mini-
mum. All sleep modes are available and can be entered from Active mode. In Active mode the
CPU is executing application code. The application code decides when and which sleep mode to
enter. Interrupts from enabled peripherals and all enabled reset sources can restore the micro-
controller from sleep to Active mode.
In addition, Power Reduction registers provide a method to stop the clock to individual peripher-
als from software. When this is done, the current state of the peripheral is frozen and there is no
power consumption from that peripheral. This reduces the power consumption in Active mode
and Idle sleep mode.
11.3
Sleep Modes
11.3.1
Idle Mode
In Idle mode the CPU and Non-Volatile Memory are stopped, but all peripherals including the
Interrupt Controller, Event System and DMA Controller are kept running. Interrupt requests from
all enabled interrupts will wake the device.
11.3.2
Power-down Mode
In Power-down mode all system clock sources, and the asynchronous Real Time Counter (RTC)
clock source, are stopped. This allows operation of asynchronous modules only. The only inter-
rupts that can wake up the MCU are the Two Wire Interface address match interrupts, and
asynchronous port interrupts, e.g pin change.
11.3.3
Power-save Mode
Power-save mode is identical to Power-down, with one exception: If the RTC is enabled, it will
keep running during sleep and the device can also wake up from RTC interrupts.
11.3.4
Standby Mode
Standby mode is identical to Power-down with the exception that all enabled system clock
sources are kept running, while the CPU, Peripheral and RTC clocks are stopped. This reduces
the wake-up time when external crystals or resonators are used.
相关PDF资料
PDF描述
IS80C52CXXX-16SHXXX:R 8-BIT, MROM, 16 MHz, MICROCONTROLLER, PQCC44
IS80C52CXXX-25:D 8-BIT, MROM, 25 MHz, MICROCONTROLLER, PQCC44
IS80C52CXXX-30SHXXX:RD 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PQCC44
IS80C52CXXX-30SHXXX:R 8-BIT, MROM, 30 MHz, MICROCONTROLLER, PQCC44
IS80C52CXXX-L16:R 8-BIT, MROM, 16 MHz, MICROCONTROLLER, PQCC44
相关代理商/技术参数
参数描述
IS80C86 制造商:Rochester Electronics LLC 功能描述:- Bulk
IS80C86-2 制造商:Rochester Electronics LLC 功能描述:- Bulk
IS80C86-2R2490 制造商:Rochester Electronics LLC 功能描述:- Bulk
IS80C88 制造商:Rochester Electronics LLC 功能描述:- Bulk
IS80C88-2 制造商:Rochester Electronics LLC 功能描述:- Bulk