参数资料
型号: KSZ8695PX-EVAL
厂商: Micrel Inc
文件页数: 15/40页
文件大小: 0K
描述: KIT EVAL KSZ8695PX EXPERIMENT
标准包装: 1
主要目的: 接口,以太网控制器(PHY 和 MAC)
嵌入式:
已用 IC / 零件: KSZ8695PX
主要属性: 单芯片网关解决方案
已供物品:
相关产品: 576-1024-ND - IC SWITCH 10/100 1PORT 289PBGA
其它名称: 576-3876
KSZ8695PX-EVAL-ND
KS8695PX
Micrel
Functional Description
Introduction
Micrel's KS8695PX, a member of the CENTAUR line of integrated processors, is a high-performance router-on-a-chip solu-
tion for Ethernet and 802.11 a/g/b based embedded systems. Designed for use in communication's routers, it integrates a
PCI to AHB bridge solution for interfacing with 32-bit PCI, miniPCI, and cardbus devices. The KS8695PX combines a proven
third generation 5-port managed switch, an ARM9 RISC processor with MMU, and ? ve physical layer transceivers (PHYs)
including their corresponding MAC units with Micrel's XceleRouter technology.
The KS8695PX is built around the 16/32-bit ARM9 RISC processor, which is a scalable, high-performance, microprocessor
developed for highly integrated system-on-a-chip applications. It also offers a con? gurable 8KB I-cache and 8KB D-cache
that reduces memory access latency for high-performance applications. The simple, elegant, and fully static design of the
KS8695PX is especially suitable for cost-effective, power-sensitive applications.
The KS8695PX contains ? ve 10/100 PHYs: four are for the local area network (LAN) and one is for the wide area network
(WAN). Connected to the PHYs are ? ve corresponding MAC units with an integrated Layer 2 managed switch. The combining
of the switch and the analog PHYs make the KS8695PX an extremely prudent solution for SOHO router applications, saving
both board space and BOM costs. The Layer 2 switch contains a 16Kx32 SRAM on-chip memory for frame buffering. The
embedded frame buffer memory is designed with a 1.4Gbps on-chip memory bus. This allows the KS8695PX to perform full
non-blocking frame switching and/or routing on the ? y for many applications
For the media interface, the KS8695PX supports 10BASE-T and 100BASE-TX, as speci? ed by the IEEE 802.3 standard,
and 100 BASE-FX on the WAN port and on one LAN port
The KS8695PX supports two modes of operation in the PCI bus environment: host bridge mode and guest bridge mode. In the
host bridge mode, the ARM9 processor acts as the host of the entire system. It con? gures other PCI devices and coordinates
their transactions, including initiating transactions between the PCI devices and AHB bus subsystem. An on-chip PCI arbiter
is included to determine the PCI bus ownership among PCI master devices. In host bridge mode, all I/O registers, including
those for the embedded switch, are con? gured by the ARM9 processor through the on-chip AMBA bus interface.
In guest bridge mode, all of the I/O registers are programmed by either the external host CPU on the PCI bus or the local
ARM9 host processor through the AMBA bus. The KS8695PX functions as a slave on the PCI bus with the on-chip PCI arbiter
disabled. The KS8695PXX can be con? gured by either the ARM9 CPU or the PCI host CPU. In both cases, the KS8695PX
memory subsystem is accessible from either the PCI host or the ARM9 CPU. Communications between the external host
CPU and the ARM9 is accomplished through message passing or through shared memory.
CPU Features
?
?
?
?
?
?
?
166MHz ARM9 RISC processor core
On-chip AMBA bus 2.0 interfaces
16-bit thumb programming to relax memory requirement
8KB I-cache and 8KB D-cache
Little-endian mode supported
Con? gurable memory management unit
Supports reduced CPU and system clock speed for power savings
PCI to AHB Bridge Features
?
?
?
?
?
?
?
?
?
?
?
?
Support 33MHz, 32-bit data PCI bus
Integrated PCI bridge support for interfacing with 32-bit miniPCI or cardbus devices
Independent AHB and PCI clock speed
Supports 125MHz AHB speed
Supports PCI revision 2.1 protocols
Supports AHB bus 2.0 interfaces
Supports both regular and memory-mapped I/O on the PCI interface
Integrated PCI arbiter with power-on option to enable or disable
Support Round Robin arbitration with three external PCI devices and one internal device
Supports AHB burst transfers up to 16 data words
Con? gurable PCI registers by host CPU ARM9
Supports bus mastership from PCI to AHB or AHB to PCI bus
Switch Engine
?
?
?
?
5-Port 10/100 integrated switch with one WAN and four LAN physical layer transceivers
16Kx32 on-chip SRAM for frame buffering
1.4Gbps on-chip memory bandwidth for wire-speed frame switching
10Mbps and 100Mbps modes of operation for both full and half duplex
September 2005
15
M9999-091605
相关PDF资料
PDF描述
KSZ9692PB-EVAL BOARD EVALUATION FOR KSZ9692PB
L17-RR-D1-F-01-100 CONN SOCKET 20-24AWG CRIMP GOLD
L171370 D-SUB BACKSHELL BLACK PLAS 9POS
L17529 D-SUB ASSY SPRING LATCH
L17D204182TX SCREWLOCK W/NUT/WASH 1=10 SETS
相关代理商/技术参数
参数描述
KSZ8695X 功能描述:网络控制器与处理器 IC Integrated Multi-Port Gateway Solution (Lead Free) RoHS:否 制造商:Micrel 产品:Controller Area Network (CAN) 收发器数量: 数据速率: 电源电流(最大值):595 mA 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:PBGA-400 封装:Tray
KSZ8695X-EVAL 功能描述:网络开发工具 KSZ8695X Evaluation Board RoHS:否 制造商:Rabbit Semiconductor 产品:Development Kits 类型:Ethernet to Wi-Fi Bridges 工具用于评估:RCM6600W 数据速率:20 Mbps, 40 Mbps 接口类型:802.11 b/g, Ethernet 工作电源电压:3.3 V
KSZ8721B 功能描述:以太网 IC 10/100 BASE-TX/FX Physical Layer Transceiver, Single 3.3V Supply, 48-SSOP (Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8721B TR 功能描述:以太网 IC 10/100 BASE-TX/FX Physical Layer Transceiver, Single 3.3V Supply, 48-SSOP (Lead Free) RoHS:否 制造商:Micrel 产品:Ethernet Switches 收发器数量:2 数据速率:10 Mb/s, 100 Mb/s 电源电压-最大:1.25 V, 3.45 V 电源电压-最小:1.15 V, 3.15 V 最大工作温度:+ 85 C 封装 / 箱体:QFN-64 封装:Tray
KSZ8721B 制造商:Micrel Inc 功能描述:Transceiver IC 制造商:Micrel Inc 功能描述:IC, TRANSCEIVER, SSOP-48