参数资料
型号: LC72130
厂商: SANYO SEMICONDUCTOR CO LTD
元件分类: PLL合成/DDS/VCOs
英文描述: PLL FREQUENCY SYNTHESIZER, 40 MHz, PDIP24
封装: SDIP-24
文件页数: 14/22页
文件大小: 306K
代理商: LC72130
Dead Zone
The phase comparator compares fp to a reference frequency (fr) as shown in Figure 4. Although the characteristics of
this circuit (see Figure 5) are such that the output voltage is proportional to the phase difference (line A), a region
(the dead zone) in which it is not possible to compare small phase differences occurs in actual ICs due to internal
circuit delays and other factors (line B). A dead zone as small as possible is desirable for products that must provide
a high S/N ratio.
However, since a larger dead zone makes this circuit easier to use, a larger dead zone is appropriate for popularly-
priced products. This is because it is possible for RF signals to leak from the mixer to the VCO and modulate the
VCO in popularly-priced products in the presence of strong RF inputs. When the dead zone is narrow, the circuit
outputs correction pulses and this output can further modulate the VCO and generate beat frequencies with the RF
signal.
Figure 4
Figure 5
2. Notes on the FMIN, AMIN, and IFIN Pins
Coupling capacitors must be placed as close as possible to their respective pin. A capacitance of about 100 pF is
desirable. In particular, if a capacitance of 1000 pF or over is used for the IF pin, the time to reach the bias level will
increase and incorrect counting may occur due to the relationship with the wait time.
3. Notes on IF Counting
→ SD must be used in conjunction with the IF counting time
When using IF counting, always implement IF counting by having the microprocessor determine the presence of the
IF-IC SD (station detect) signal and turn on the IF counter buffer only if the SD signal is present. Schemes in which
auto-searches are performed with only IF counting are not recommended, since they can stop at points where there is
no signal due to leakage output from the IF counter buffer.
4. DO Pin Usage Techniques
In addition to data output mode times, the DO pin can also be used to check for IF counter count completion and for
unlock detection output. Also, an input pin state can be output unchanged through the DO pin and input to the
controller.
5. Power Supply Pins
A capacitor of at least 2000 pF must be inserted between the power supply VDD and VSS pins for noise exclusion.
This capacitor must be placed as close as possible to the VDD and VSS pins.
Pin States After the Power ON Reset
No. 4973-21/22
LC72130, 72130M
A03484
相关PDF资料
PDF描述
LC7218 PLL FREQUENCY SYNTHESIZER, 40 MHz, PDIP24
LC7218JM PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO24
LC7218M PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO24
LIS3L02AS5 SPECIALTY ANALOG CIRCUIT, PDSO24
LIS3L02AS5TR SPECIALTY ANALOG CIRCUIT, PDSO24
相关代理商/技术参数
参数描述
LC72130-D-E 制造商:ON Semiconductor 功能描述:PLL FREQUENCY SYNTHESIZER - Ammo Pack 制造商:ON Semiconductor 功能描述:FNFLD / PLL FREQUENCY SYNTHESIZER
LC72130-E 功能描述:时钟合成器/抖动清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel
LC72130M 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:AM/FM PLL Frequency Synthesizer
LC72131 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:AM/FM PLL Frequency Synthesizer
LC72131D 制造商:Panasonic Industrial Company 功能描述:IC