- 您现在的位置：买卖IC网 > PDF目录69004 > LC72130 (SANYO SEMICONDUCTOR CO LTD) PLL FREQUENCY SYNTHESIZER, 40 MHz, PDIP24 PDF资料下载
参数资料
| 型号： | LC72130 |
| 厂商： | SANYO SEMICONDUCTOR CO LTD |
| 元件分类： | PLL合成/DDS/VCOs |
| 英文描述： | PLL FREQUENCY SYNTHESIZER, 40 MHz, PDIP24 |
| 封装： | SDIP-24 |
| 文件页数： | 20/22页 |
| 文件大小： | 306K |
| 代理商： | LC72130 |
Continued from preceding page.
No. 4973-7/22
LC72130, 72130M
Symbol
Pin No.
Type
Functions
Circuit configuration
VSS
BO1
BO2
BO3
BO4
BO5
IO1
IO2
PD1
PD2
AIN1
AOUT1
AIN2
AOUT2
IFIN
23
7
8
9
10
2
11
13
19
20
18
17
21
22
12
Ground
Output port
I/O port
Charge pump
output
LPF amplifier
transistor
IF counter
The LC72130 ground
—
Dedicated output pins
The output states are determined by BO1 to BO5 in the
serial data.
Data: 0 = open, 1 = low
These pins go to the open state after the power on reset.
An 8 Hz time base signal can be output from BO1 when
TBC in the serial data is set to 1.
Note that the ON impedance of the BO1 pin is higher
than that of the other pins (BO2 to BO5).
Pins used for both input and output
The input or output state is determined by bits IOC1 and
IOC2 in the serial data.
Data: 0 = input port, 1 = output port
When specified for use as an input port:
The input state is transmitted to the controller through
the DO pin.
Input state: Low
→ data value = 0
High
→ data value = 1
When specified for use as an output port:
The output state is determined by bits IO1 and IO2 in the
serial data.
Data: 0 = open, 1 = low
These pins go to the input port state after the power ON
reset.
PLL charge pump output
When the frequency generated by dividing the local
oscillator frequency by N is higher than the reference
frequency, a high level will be output from the PD pin.
Similarly, when that frequency is lower, a low level will
be output. The PD pin goes to the high impedance state
when the frequencies agree.
The MOS transistor used for the PLL active low-pass
filter.
The input frequency range is from 0.4 to 12 MHz.
The signal is supplied directly to the IF counter.
The result from the IF counter MSB is output through the
DO pin.
There are four measurement periods: 4, 8, 32, or 64 ms.
相关PDF资料 |
PDF描述 |
|---|---|
| LC7218 | PLL FREQUENCY SYNTHESIZER, 40 MHz, PDIP24 |
| LC7218JM | PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO24 |
| LC7218M | PLL FREQUENCY SYNTHESIZER, 40 MHz, PDSO24 |
| LIS3L02AS5 | SPECIALTY ANALOG CIRCUIT, PDSO24 |
| LIS3L02AS5TR | SPECIALTY ANALOG CIRCUIT, PDSO24 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| LC72130-D-E | 制造商:ON Semiconductor 功能描述:PLL FREQUENCY SYNTHESIZER - Ammo Pack 制造商:ON Semiconductor 功能描述:FNFLD / PLL FREQUENCY SYNTHESIZER |
| LC72130-E | 功能描述:时钟合成器/抖动清除器 RoHS:否 制造商:Skyworks Solutions, Inc. 输出端数量: 输出电平: 最大输出频率: 输入电平: 最大输入频率:6.1 GHz 电源电压-最大:3.3 V 电源电压-最小:2.7 V 封装 / 箱体:TSSOP-28 封装:Reel |
| LC72130M | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:AM/FM PLL Frequency Synthesizer |
| LC72131 | 制造商:SANYO 制造商全称:Sanyo Semicon Device 功能描述:AM/FM PLL Frequency Synthesizer |
| LC72131D | 制造商:Panasonic Industrial Company 功能描述:IC |
发布紧急采购，3分钟左右您将得到回复。