参数资料
型号: LTC3589IUJ-1#PBF
厂商: LINEAR TECHNOLOGY CORP
元件分类: 稳压器
英文描述: SWITCHING REGULATOR, 2600 kHz SWITCHING FREQ-MAX, PQCC40
封装: 6 X 6 MM, 0.75 MM HEIGHT, LEAD FREE, PLASTIC, QFN-40
文件页数: 37/46页
文件大小: 570K
代理商: LTC3589IUJ-1#PBF
LTC3589/LTC3589-1
42
3589fc
APPLICATIONS INFORMATION
PXA16X Armada Processor Support
LTC3589/LTC3589-1 includes spare register bits that can
be accessed by the processor for setting and recalling
hibernate and resume operation.
The keep-alive function allow a step-down switching
regulator to maintain system memory during a hibernate
shutdown state of the Armada processor.
i.MX Processor Support
The LTC3589/LTC3589-1 has hardware features specifically
designed for the latest i.MX family of processors from
Freescale Semiconductor. The i.MX51 controls the VSTB
input pin of the LTC3589/LTC3589-1 to command transi-
tions between the run mode core voltage and the lower
level standby voltage. The run and standby voltage levels
are initially programmed in I2C command registers xxBTV1
and xxBTV2. When the VSTB pin is asserted high all four
dynamically controlled output supply rails will slew to the
xxBTV2 set point. When xxBTV1 and xxBTV2 are set at
the same value, as they are by default, then no slewing
occurs. This allows the single VSTB pin to control any
combination of the four DAC controlled regulators to slew
between two programmed output voltages. When VSTB is
de-asserted back to a zero value the regulators slew back
up to the xxBTV1 set point.
Earlier i.MX family processors such as the i.MX31 included
two VSTB pins used for controlling the regulator outputs
for a low voltage standby mode, nominal voltage run
mode, and a higher voltage overdrive mode. The LTC3589/
LTC3589-1 can be used with these processors using the
VSTB input pin to select between run and standby voltages
and using minimal software overhead to set the overdrive
voltage in I2C command registers.
The default DAC reference value in all xxBTVx registers
is 0x19. This accommodates i.MX processors and others
requiring an overdrive voltage. The value can be increased
up to 0x1F for overdrive or supply margining above the
nominal run voltage. Once programmed into the I2C com-
mand registers xxBTVx two voltage outputs are selected
by the VSTB pin. All voltage levels and changes are fully
controllable using the I2C serial port.
OMAP3 and DaVinci Processor Support
The OMAP3 family of ARM processors has similar require-
ments to the processors described above. The LTC3589/
LTC3589-1 I2C control can fully accommodate the smart
reflex dynamic voltage control with proper embedded
software drivers tailored to the LTC3589/LTC3589-1
register mapping. The LTC3589/LTC3589-1 demo board
demonstrates configuring and dynamically slewing and
sequencing the outputs using I2C control. The same provi-
sions can be incorporated into embedded software drivers
for the OMAP3 or any other target processor.
相关PDF资料
PDF描述
LES015YJ38N 1-OUTPUT 15 W DC-DC REG PWR SUPPLY MODULE
LES015ZH38N 1-OUTPUT 15 W DC-DC REG PWR SUPPLY MODULE
LM2320-7ERV2F 2-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE
LM2320-9ERD3A 2-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE
LM2540-7ERD0AH 2-OUTPUT 50 W AC-DC REG PWR SUPPLY MODULE
相关代理商/技术参数
参数描述
LTC3589IUJ-2#PBF 功能描述:IC POWER MANAGEMENT RoHS:是 类别:集成电路 (IC) >> PMIC - 电源管理 - 专用 系列:* 标准包装:1 系列:- 应用:手持/移动设备 电流 - 电源:- 电源电压:3 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-WFDFN 裸露焊盘 供应商设备封装:14-LLP-EP(4x4) 包装:Digi-Reel® 配用:LP3905SD-30EV-ND - BOARD EVALUATION LP3905SD-30 其它名称:LP3905SD-30DKR
LTC3589IUJ-2#TRPBF 功能描述:IC POWER MANAGEMENT RoHS:是 类别:集成电路 (IC) >> PMIC - 电源管理 - 专用 系列:* 标准包装:1 系列:- 应用:手持/移动设备 电流 - 电源:- 电源电压:3 V ~ 5.5 V 工作温度:-40°C ~ 85°C 安装类型:表面贴装 封装/外壳:14-WFDFN 裸露焊盘 供应商设备封装:14-LLP-EP(4x4) 包装:Digi-Reel® 配用:LP3905SD-30EV-ND - BOARD EVALUATION LP3905SD-30 其它名称:LP3905SD-30DKR
LTC3589IUJ-PBF 制造商:LINER 制造商全称:Linear Technology 功能描述:8-Output Regulator with Sequencing and I2C
LTC3589IUJ-TRPBF 制造商:LINER 制造商全称:Linear Technology 功能描述:8-Output Regulator with Sequencing and I2C
LTC3600EDD#PBF 功能描述:IC REG BUCK SYNC ADJ 1.5A 12DFN RoHS:是 类别:集成电路 (IC) >> PMIC - 稳压器 - DC DC 开关稳压器 系列:- 标准包装:2,500 系列:- 类型:降压(降压) 输出类型:固定 输出数:1 输出电压:1.2V,1.5V,1.8V,2.5V 输入电压:2.7 V ~ 20 V PWM 型:- 频率 - 开关:- 电流 - 输出:50mA 同步整流器:是 工作温度:-40°C ~ 125°C 安装类型:表面贴装 封装/外壳:10-TFSOP,10-MSOP(0.118",3.00mm 宽)裸露焊盘 包装:带卷 (TR) 供应商设备封装:10-MSOP 裸露焊盘