收藏本站
参数资料
型号： M30201F4T-FP
元件分类： 微控制器/微处理器
英文描述： 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP56
封装： PLASTIC, QFP-56
文件页数： 127/158页
文件大小： 1633K
代理商： M30201F4T-FP
70
Under
development
Mitsubishi microcomputers
M30201 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
Timer X
Item
Specification
Count source
f1, f8, f32, fC32
Count operation
The timer counts down
When the count reaches 000016, the timer stops counting after reloading a new count
If a trigger occurs when counting, the timer reloads a new count and restarts counting
Divide ratio
1/n
n : Set value
Count start condition
An external trigger is input
The timer overflows
The one-shot start flag is set (= 1)
Count stop condition
A new count is reloaded after the count has reached 000016
The count start flag is reset (= 0)
Interrupt request generation timing
The count reaches 000016
TXiINOUT pin function
Programmable I/O port, trigger input or pulse output
Read from timer
When timer Xi register is read, it indicates an indeterminate value
Write to timer
When counting stopped
When a value is written to timer Xi register, it is written to both reload
register and counter
When counting in progress
When a value is written to timer Xi register, it is written to only reload register
(Transferred to counter at next reload time)
Table 1.23. Timer specifications in one-shot timer mode
Figure 1.62. Timer Xi mode register in one-shot timer mode
(3) One-shot timer mode
In this mode, the timer operates only once. (See Table 1.23.) When a trigger occurs, the timer starts up and
continues operating for a given period. Figure 1.62 shows the timer Xi mode register in one-shot timer mode.
Bit name
Function
Bit symbol
Operation mode
select bit
1 0 : One-shot timer mode or pulse period /
pulse width measurement mode
b1 b0
TMOD1
TMOD0
MR0
Pulse output function
select bit
0 : Pulse is not output
(TXiINOOUT pin is a normal port pin)
1 : Pulse is output (Note 1)
(TXiINOOUT pin is a pulse output pin)
MR2
MR1
MR3
0 (Must always be “0” in one-shot timer mode)
0 0 : f1
0 1 : f8
1 0 : f32
1 1 : fC32
b7 b6
TCK1
TCK0
Count source select bit
10
0
0 : One-shot start flag is valid
1 : Selected by event/trigger select register (Note 4)
Trigger select bit
External trigger select
bit (Note 2)
0 : Falling edge of TXiINOOUT pin's input signal (Note 3)
1 : Rising edge of TXiINOOUT pin's input signal (Note 3)
W
R
Note 1: Set the corresponding port direction register to “1” (output mode). External trigger cannot be selected
as count start condition when pulse output function is selected.
Note 2: Valid only when the TXiINOUT pin is selected by the event/trigger select bit (addresses 038316). If
timer overflow is selected, this bit can be “1” or “0”.
Note 3: Set the corresponding port direction register to “0” (input mode).
Note 4: Pulse output function cannot be selected when TXiINOUT pin is selected by the event/trigger select bit
(addresses 038316).
Timer Xi mode register
Symbol
Address
When reset
TXiMR(i = 0 to 2) 039716 to 039916
0016
b7
b6
b5 b4
b3
b2
b1
b0
相关PDF资料
PDF描述
M38259EFFS 8-BIT, UVPROM, 8 MHz, MICROCONTROLLER, CQCC100
M38259EF-XXXFP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP100
M37471E8SS 8-BIT, UVPROM, 8 MHz, MICROCONTROLLER, CDIP42
M38503E6FP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDSO42
M37212M6-XXXFP 8-BIT, MROM, MICROCONTROLLER, PQFP80
相关代理商/技术参数
参数描述
M30201F4T-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY
M30201F4T-XXXSP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY
M30201F4-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY
M30201F4-XXXSP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY
M30201F6 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*