收藏本站
参数资料
型号： M30201F4T-FP
元件分类： 微控制器/微处理器
英文描述： 16-BIT, FLASH, 10 MHz, MICROCONTROLLER, PQFP56
封装： PLASTIC, QFP-56
文件页数： 32/158页
文件大小： 1633K
代理商： M30201F4T-FP
127
Under
development
Mitsubishi microcomputers
M30201 Group
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
CPU Rewrite Mode
Preliminary
CPU Rewrite Mode
In CPU rewrite mode, the on-chip flash memory can be operated on (read, program, or erase) under control
of the Central Processing Unit (CPU). In CPU rewrite mode, the flash memory can be operated on by
reading or writing to the flash memory control register and flash command register. Figure BB-1, Figure BB-
2 show the flash memory control register, and flash command register respectively.
Also, in CPU rewrite mode, the CNVSS pin is used as the VPP power supply pin. Apply the power supply
voltage, VPPH, from an external source to this pin.
In CPU rewrite mode, only the user ROM area shown in Figure AA-3 can be rewritten; the boot ROM area
cannot be rewritten. Make sure the program and block commands are issued for only the user ROM area.
The control program for CPU rewrite mode can be stored in either user ROM or boot ROM area. In the CPU
rewrite mode, because the flash memory cannot be read from the CPU, the rewrite control program must
be transferred to internal RAM before it can be executed.
Flash memory control register 0
Symbol
Address
When reset
FCON0
03B416
001000002
W
R
b7
b6
b5
b4
b3
b2 b1
b0
CPU rewrite mode
select bit
FCON00
Bit symbol
Bit name
Function
RW
0: CPU rewrite mode is invalid
1: CPU rewrite mode is valid
This bit can not write. The value, if
read, turns out to be indeterminate.
Reserved bit
CPU rewrite mode
monitor flag
0: CPU rewrite mode is invalid
1: CPU rewrite mode is valid
Must always be set to "0".
Nothing is assigned. In an attempt to write this bit, write "0". The value,
if read, turns out to be "0".
FCON02
0
Reserved bit
0
1
Must always be set to "1".
Reserved bit
0
Must always be set to "0".
Reserved bit
Flash memory control register 1
Symbol
Address
When reset
FCON1
03B516
XXXXXX002
W
R
b7
b6
b5
b4
b3
b2 b1
b0
Bit symbol
Bit name
Function
RW
0
Reserved bit
Nothing is assigned. In an attempt to write these bits, write "0". The
value, if read, turns out to be indeterminate.
Must always be set to "0".
Flash command register
Symbol
Address
When reset
FCMD
03B616
0016
W
R
b7
b6
b5
b4
b3
b2 b1
b0
Writing of software command
<Software command name>
<Command code>
Read command
"0016"
Program command
"4016"
Program verify command
"C016"
Erase command
"2016" +"2016"
Erase verify command
"A016"
Reset command
"FF16" +"FF6"
Function
RW
Figure BB-1. Flash memory control register
Figure BB-2. Flash command register
相关PDF资料
PDF描述
M38259EFFS 8-BIT, UVPROM, 8 MHz, MICROCONTROLLER, CQCC100
M38259EF-XXXFP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PQFP100
M37471E8SS 8-BIT, UVPROM, 8 MHz, MICROCONTROLLER, CDIP42
M38503E6FP 8-BIT, OTPROM, 8 MHz, MICROCONTROLLER, PDSO42
M37212M6-XXXFP 8-BIT, MROM, MICROCONTROLLER, PQFP80
相关代理商/技术参数
参数描述
M30201F4T-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY
M30201F4T-XXXSP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY
M30201F4-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY
M30201F4-XXXSP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT SINGLE-CHIP MICROCOMPUTER M16C FAMILY
M30201F6 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*