参数资料
型号: M37271EFSP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PDIP52
封装: 0.600 INCH, 1.78 MM PITCH, PLASTIC, SDIP-52
文件页数: 53/64页
文件大小: 1252K
代理商: M37271EFSP
MITSUBISHI MICROCOMPUTERS
M37271MF-XXXSP
M37271EF-XXXSP, M37271EFSP
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
and ON-SCREEN DISPLAY CONTROLLER
54
Notes 1 : 1TC (TC : OSD clock cycle divided by prescaler) gap oc-
curs between the horizontal display start position set by
the horizontal position register and the most left dot of the
1st block. Accordingly, when 2 blocks have different pre-
divide ratios, their horizontal display start position will not
match.
2 : The horizontal start position is based on the OSD clock
source cycle selected for each block. Accordingly, when 2
blocks have different OSD clock source cycles, their hori-
zontal display start position will not match.
Fig. 60. Notes on horizontal display start position
(3) Dot Size
The dot size can be selected by a block unit. The dot size in vertical
direction is determined by dividing HSYNC in the vertical dot size con-
trol circuit. The dot size in horizontal is determined by dividing the
following clock in the horizontal dot size control circuit : the clock
gained by dividing the OSD clock source (data slicer clock, OSC1) in
the pre-divide circuit. The clock cycle divided in the pre-divide circuit
is defined as 1TC.
The dot size of the layer 1 is specified by bits 6 to 3 of the block
control register.
The dot size of the layer 2 is specified by the following bits : bits 3
and 4 of the block control register, bit 6 of the clock source control
register. Refer to Figure 53 (the structure of the block control regis-
ter), refer to Figure 62 (the structure of the clock source control reg-
ister).
The block diagram of dot size control circuit is shown in Figure 61.
Notes 1 : The pre-divide ratio = 3 cannot be used in the CC mode.
2 : The pre-divide ratio of the OSD mode block on the layer 2
must be same as that of the CC mode block on the layer 1
by bit 6 of the clock source control register.
3 : In the bi-scan mode, the dot size in the vertical direction is
2 times as compared with the normal mode. Refer to “(13)
Scan Mode” about the scan mode.
Fig. 61. Block diagram of dot size control circuit
HSYNC
1TC
Block 1 (Pre-divide ratio
1, clock source data slicer clock)
1TC
4TOSC!N
4TOSC’!N
Note 1
Note 2
Block 2 (Pre-divide ratio
2, clock source
data slicer clock)
Block 3 (Pre-divide ratio
3, clock source data slicer clock)
Block 4 (Pre-divide ratio
3, clock source
OSC1)
Data slicer clock
HSYNC
OSC1
CS0
Synchronization
Cycle!2
circuit
Cycle!3
Pre-divide circuit
Clock cycle
= 1TC
Horizontal dot size
control circuit
Vertical dot size
control circuit
OSD control circuit
=
==
=
==
相关PDF资料
PDF描述
M37271MF-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52
M37272M6-XXXSP 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42
M37273MF-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52
M37274EFSP 8-BIT, OTPROM, MICROCONTROLLER, PDIP52
M37274EFSP 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PDIP52
相关代理商/技术参数
参数描述
M37271EFSS 功能描述:EPROM MCU/8BIT CMOS EMULATION CH RoHS:否 类别:编程器,开发系统 >> 配件 系列:- 标准包装:1 系列:- 附件类型:适配器板 适用于相关产品:RCB230,RCB231,RCB212 配用:26790D-ND - RCB BREAKOUT BOARD RS232 CABLE
M37271EF-XXXSP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M37271MF 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M37271MF-213SP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER
M37271MF-219SP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER