- 您现在的位置：买卖IC网 > PDF目录69012 > M37271EFSP 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PDIP52 PDF资料下载
参数资料
| 型号： | M37271EFSP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PDIP52 |
| 封装： | 0.600 INCH, 1.78 MM PITCH, PLASTIC, SDIP-52 |
| 文件页数： | 64/64页 |
| 文件大小： | 1252K |
| 代理商： | M37271EFSP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页当前第64页
MITSUBISHI MICROCOMPUTERS
M37271MF-XXXSP
M37271EF-XXXSP, M37271EFSP
SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER
and ON-SCREEN DISPLAY CONTROLLER
6
Apply voltage of 5 V ± 10 % (typical) to VCC and AVCC, and 0 V to VSS.
This is connected to VSS.
To enter the reset state, the reset input pin must be kept at a “L” for 2
s or more (under
normal VCC conditions).
If more time is needed for the quartz-crystal oscillator to stabilize, this “L” condition should
be maintained for the required time.
This chip has an internal clock generating circuit. To control generating frequency, an
external ceramic resonator or a quartz-crystal oscillator is connected between pins XIN and
XOUT. If an external clock is used, the clock source should be connected to the XIN pin and
the XOUT pin should be left open.
Port P0 is an 8-bit I/O port with direction register allowing each I/O bit to be individually
programmed as input or output. At reset, this port is set to input mode. The output structure
of P03 is CMOS output, that of P00–P02 and P04–P07 are N-channel open-drain output.
The note out of this Table gives a full of port P0 function.
Pins P00–P02 and P04–P07 are also used as PWM output pins PWM4–PWM6 and PWM0–
PWM3 respectively. The output structure is N-channel open-drain output.
Port P1 is an 8-bit I/O port and has basically the same functions as port P0. The output
structure of P10 and P15–P17 is CMOS output, that of P11–P14 is N-channel open-drain
output.
Pins P10, P15, P16 are also used as OSD output pins OUT2, I1, I2 respectively. The output
structure is CMOS output.
Pins P11–P14 are used as SCL1, SCL2, SDA1 and SDA2 respectively, when multi-master
I2C-BUS interface is used. The output structure is N-channel open-drain output.
P17 pin is also used as serial I/O data input pin SIN.
Port P2 is an 8-bit I/O port and has basically the same functions as port P0. The output
structure is CMOS output.
Pins P24–P26 are also used as analog input pins AD3–AD1 respectively.
Ports P30 and P31 are a 2-bit I/O port and has basically the same functions as port P0. The
output structure is CMOS output.
Ports P40–P46 are a 7-bit input port.
P40 pin is also used as analog input pin AD4.
Pins P41, P44 are also used as external interrupt input INT2, INT1.
Pins P42 and P43 are also used as external clock input pins TIM2, TIM3 respectively.
P45 pin is used as serial I/O data output pin SOUT. The output structure is N-channel open-
drain output.
P46 pin is used as serial I/O synchronizing clock input/output pin SCLK. The output struc-
ture is N-channel open-drain output.
Ports P52–P55 are a 4-bit output port. The output structure is CMOS output.
Pins P52–P55 are also used as OSD output pins R, G, B, OUT1 respectively.
PIN DESCRIPTION
Pin
Name
Input/
Output
Power source
CNVSS
Reset input
Clock input
Clock output
I/O port P0
PWM output
I/O port P1
OSD output
Multi-master
I2C-BUS interface
Serial I/O data
input
I/O port P2
Analog input
I/O port P3
Input port P4
Analog input
External interrupt
input
External clock input
Serial I/O data
output
Serial I/O
synchronizing clock
input/output
Output port P5
OSD output
VCC,
AVCC,
VSS.
CNVSS
_____
RESET
XIN
XOUT
P00/PWM4–
P02/PWM6,
P03,
P04/PWM0–
P07/PWM3
P10/OUT2,
P11/SCL1,
P12/SCL2,
P13/SDA1,
P14/SDA2,
P15/I1,
P16/I2/INT3,
P17/SIN
P20–P23
P24/AD3–
P26/AD1,
P27
P30, P31
P40/AD4,
P41/INT2,
P42/TIM2,
P43/TIM3,
P44/INT1,
P45/SOUT,
P46/SCLK,
P52/R,P53/G,
P54/B,
P55/OUT1
Input
Output
I/O
Output
I/O
Output
Input
I/O
Input
I/O
Input
Output
I/O
Output
相关PDF资料 |
PDF描述 |
|---|---|
| M37271MF-XXXSP | 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52 |
| M37272M6-XXXSP | 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PDIP42 |
| M37273MF-XXXSP | 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP52 |
| M37274EFSP | 8-BIT, OTPROM, MICROCONTROLLER, PDIP52 |
| M37274EFSP | 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PDIP52 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M37271EFSS | 功能描述:EPROM MCU/8BIT CMOS EMULATION CH RoHS:否 类别:编程器，开发系统 >> 配件 系列:- 标准包装:1 系列:- 附件类型:适配器板 适用于相关产品:RCB230，RCB231，RCB212 配用:26790D-ND - RCB BREAKOUT BOARD RS232 CABLE |
| M37271EF-XXXSP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER |
| M37271MF | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER |
| M37271MF-213SP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER |
| M37271MF-219SP | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER with CLOSED CAPTION DECODER and ON-SCREEN DISPLAY CONTROLLER |
发布紧急采购，3分钟左右您将得到回复。