参数资料
型号: M37641F8FP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, FLASH, 12 MHz, MICROCONTROLLER, PQFP80
封装: 14 X 20 MM, 0.80 MM, PLASTIC, QFP-80
文件页数: 104/140页
文件大小: 1694K
代理商: M37641F8FP
7641 Group
Rev.4.00
Aug 28, 2006
page 64 of 135
REJ03B0191-0400
Fig. 57 Special count source generator block diagram
COUNT SOURCE GENERATOR
The 7641 Group has a built-in special count source generator,
SCSG. This generator consists of two 8-bit timers: SCSG1 and
SCSG2. The output of the special count source generator can be
used as a clock source for the timer X, serial I/O and two UARTs.
SCSG Operation
Timers SCSG1 and SCSG2 are both down count timers. When the
count reaches “0”, an underflow occurs at the next count source
rising edge and the contents of the corresponding timer latch are
loaded to the timer. The division ratio of each SCSG-x timer is
given by 1 / (n+1), where “n” is the value set to the SCSG-x timer.
The output of Timer SCSG1 is ANDed with the original clock (
φ) to
make a count source for Timer SCSG2.
The SCSG output is Clock SCSGCLK. The frequency is calculated
as follows:
SCSGCLK =
φ {n1 / (n1+1)} {1 / (n2+1)}
n1: value set to SCSG1
n2: value set to SCSG2
If the SCSG1 Count Stop Bit (SCSGM1) is set to “1”, or Timer
SCSG1 is set to “0”, the SCSG1 count stops. When this happens,
the count source for Timer SCSG2 becomes
φ.
Data Write Control
When the SCSG1 Data Write Control Bit or SCSG2 Data Write
Control Bit is set to “0”, and data is written to the SCSG-x timer;
the data is written to the corresponding latch and timer at the
same time. When that bit is set to “1”, the data is only written to
the latch.
SCSGCLK
SCSG1 count stop bit
SCSGCLK output control bit
φ
SCSG1 Timer Reload Latch
SCSG1 Timer (8)
SCSG1 data write control bit
SCSG2 data write control bit
SCSG2 Timer Reload Latch
SCSG2 Timer (8)
SCSGCLK output control bit
SCSG1 count stop bit
相关PDF资料
PDF描述
M37641M8-XXXFP 8-BIT, MROM, 24 MHz, MICROCONTROLLER, PQFP80
M37643M8-XXXFP 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
M37643F8HP 8-BIT, FLASH, 12 MHz, MICROCONTROLLER, PQFP80
M37643M8-XXXHP 8-BIT, MROM, 12 MHz, MICROCONTROLLER, PQFP80
M37700M2-XXXFP 16-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP80
相关代理商/技术参数
参数描述
M37641F8FP#U0 功能描述:IC 740 MCU FLASH 32K 80QFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/7600 标准包装:250 系列:56F8xxx 核心处理器:56800E 芯体尺寸:16-位 速度:60MHz 连通性:CAN,SCI,SPI 外围设备:POR,PWM,温度传感器,WDT 输入/输出数:21 程序存储器容量:40KB(20K x 16) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:6K x 16 电压 - 电源 (Vcc/Vdd):2.25 V ~ 3.6 V 数据转换器:A/D 6x12b 振荡器型:内部 工作温度:-40°C ~ 125°C 封装/外壳:48-LQFP 包装:托盘 配用:MC56F8323EVME-ND - BOARD EVALUATION MC56F8323
M37641F8HP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37641F8HP#U0 功能描述:IC 740 MCU FLASH 32K 80LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/7600 产品培训模块:Graphics LCD System and PIC24 Interface Asynchronous Stimulus 标准包装:27 系列:PIC® 24H 核心处理器:PIC 芯体尺寸:16-位 速度:40 MIP 连通性:I²C,SPI,UART/USART 外围设备:欠压检测/复位,POR,PWM,WDT 输入/输出数:21 程序存储器容量:12KB(4K x 24) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:1K x 8 电压 - 电源 (Vcc/Vdd):3 V ~ 3.6 V 数据转换器:A/D 10x10b/12b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:28-SOIC(0.295",7.50mm 宽) 包装:管件 产品目录页面:648 (CN2011-ZH PDF) 配用:AC164339-ND - MODULE SKT FOR PM3 28SOICDV164033-ND - KIT START EXPLORER 16 MPLAB ICD2
M37641F8M8-XXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER
M37641F8-XXXFP 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 8-BIT CMOS MICROCOMPUTER