- 您现在的位置：买卖IC网 > PDF目录69014 > M37733MHBXXXFP 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP80 PDF资料下载
参数资料
| 型号： | M37733MHBXXXFP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP80 |
| 封装： | 14 X 20 MM, 0.80 MM PITCH, PLASTIC, QFP-80 |
| 文件页数： | 4/89页 |
| 文件大小： | 1506K |
| 代理商： | M37733MHBXXXFP |
第1页第2页第3页当前第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页
12
MITSUBISHI MICROCOMPUTERS
M37733MHBXXXFP
SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER
PRELIMINARY
Notice:
This
is not
a final
specification.
Some
parametric
limits
are
subject
to change.
INTERRUPTS
Table 1 shows the interrupt sources and the corresponding interrupt
vector addresses. Reset is also treated as a source of interrupt and
is described in this section.
DBC
is an interrupt used only for debugging.
Interrupts other than reset, DBC, watchdog timer, zero divide, and
BRK instruction all have their respective interrupt control registers.
Table 2 shows the addresses of the interrupt control registers and
Figure 6 shows the bit configuration of the interrupt control register.
The interrupt request bit is automatically cleared by hardware during
reset or when processing an interrupt. Also, interrupt request bits
other than DBC and watchdog timer can be cleared by software.
INT0
to INT2 are external interrupts, and whether to cause an interrupt
at the input level (level sense) or at the edge (edge sense) can be
selected with the level sense/edge sense selection bit. Furthermore,
the polarity of the interrupt input can be selected with a polarity
selection bit.
In the INT2 /Key input interrupt, whether to input an interrupt request
from the INT2 pin or the KI0 – KI3 pins can be selected by bit 7 of the
port function control register (refer to Figure 11).
Timer and UART interrupts are described in the respective section.
The priority of interrupts when multiple interrupts are caused
simultaneously is partially fixed by hardware, but it can also be
adjusted by software as shown in Figure 7. The hardware priority is
fixed as follows:
reset > DBC > watchdog timer > other interrupts
Table 1. Interrupt sources and the interrupt vector addresses
Fig. 6 Interrupt control register bit configuration
7
Interrupt priority level selection bits
65 43 2 1 0
Interrupt request bit
0 : No interrupt
1 : Interrupt
Interrupt control register configuration for timers A0 to A4, timers B0 to B2, UART0, UART1 and
A-D/UART2 trans./rece.
7
Interrupt priority level selection bits
65 43 2 1 0
Interrupt request bit
0 : No interrupt
1 : Interrupt
Polarity selection bit
0 : Interrupt request bit is set at “H” level for level sense or at the falling
edge for edge sence.
1 : Interrupt request bit is set at “L” level for level sense or at the rising
edge for edge sense.
Level sense/edge sense selection bit
0 : Edge sense
1 : Level sense
Interrupt control register configuration for INT0 to INT2/Key input
Interrupts
Vector addresses
A-D/UART2 trans./rece.
00FFD616
00FFD716
UART1 transmit
00FFD816
00FFD916
UART1 receive
00FFDA16
00FFDB16
UART0 transmit
00FFDC16
00FFDD16
UART0 receive
00FFDE16
00FFDF16
Timer B2
00FFE016
00FFE116
Timer B1
00FFE216
00FFE316
Timer B0
00FFE416
00FFE516
Timer A4
00FFE616
00FFE716
Timer A3
00FFE816
00FFE916
Timer A2
00FFEA16
00FFEB16
Timer A1
00FFEC16
00FFED16
Timer A0
00FFEE16
00FFEF16
INT2
/Key input
00FFF016
00FFF116
INT1
00FFF216
00FFF316
INT0
00FFF416
00FFF516
Watchdog timer
00FFF616
00FFF716
DBC
(unusable)
00FFF816
00FFF916
BRK instruction
00FFFA16
00FFFB16
Zero divide
00FFFC16
00FFFD16
Reset
00FFFE16
00FFFF16
相关PDF资料 |
PDF描述 |
|---|---|
| M37734E8BFS | 16-BIT, UVPROM, 25 MHz, MICROCONTROLLER, CQCC80 |
| M37734E8BXXXFP | 16-BIT, OTPROM, 25 MHz, MICROCONTROLLER, PQFP80 |
| M37735EHBFS | 16-BIT, UVPROM, 25 MHz, MICROCONTROLLER, CQCC80 |
| M37735EHBXXXFP | 16-BIT, OTPROM, 25 MHz, MICROCONTROLLER, PQFP80 |
| M37735EHLXXXHP | 16-BIT, OTPROM, 12 MHz, MICROCONTROLLER, PQFP80 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M37733MHL | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
| M37733MHLXXXHP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:SINGLE-CHIP 16-BIT CMOS MICROCOMPUTER |
| M37733S4 | 制造商:MITSUBISHI 制造商全称:Mitsubishi Electric Semiconductor 功能描述:16-BIT CMOS MICROCOMPUTER |
| M37733S4BFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER |
| M37733S4LHP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER |
发布紧急采购，3分钟左右您将得到回复。