- 您现在的位置：买卖IC网 > PDF目录98007 > M37906F8CSP 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDIP42 PDF资料下载
参数资料
| 型号： | M37906F8CSP |
| 元件分类： | 微控制器/微处理器 |
| 英文描述： | 16-BIT, FLASH, 20 MHz, MICROCONTROLLER, PDIP42 |
| 封装： | 0.600 INCH, 1.78 MM PITCH, PLASTIC, SDIP-42 |
| 文件页数： | 18/37页 |
| 文件大小： | 352K |
| 代理商： | M37906F8CSP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页当前第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页
M37906F8CFP, M37906F8CSP
16-BIT CMOS MICROCOMPUTER
MITSUBISHI MICROCOMPUTERS
PRELIMINAR
Y
Notice:
This
is not
a final
specification.
Som
e param
etric
lim
its are
subject
to change.
22
Erase Status Bit (SR.5)
This bit reports the status of the automatic erase operation. This bit
is set to “1” if an erase error occurs and returns to “0” if the clear sta-
tus register command (5016) is written.
Programming Status Bit (SR.4)
This bit reports the status of the automatic programming operation.
This bit is set to “1” if a programming error occurs and returns to “0”
if the clear status register command (5016) is written.
Under the condition that any of SR.5, SR.4 = “1”, none of the pro-
gramming, block erase, and erase all block commands can be ac-
cepted. Before execution of these commands, execute the clear
status register command (5016), in advance, to clear these status
bits.
Both of SR.4, SR.5 are set to “1” under the following conditions
(Command Sequence Error):
(1) when data other than “D016” and “FF16” is written to the data in
the 2nd bus cycle of the block erase command (2016/D016)
(2) when data other than “2016” and “FF16” is written to the data in
the 2nd bus cycle of the erase all block command
(2016/2016)
Note that, writing of “FF16” forces the microcomputer into the read
array mode. Simultaneously with this, the command written in the 1st
bus cycle will be canceled.
Full Status Check
The full status check reports the results of the erase or programming
operation.
Figure 11 shows the full status check flowchart and actions to be
taken if an error has occurred.
Terminated normally.
Terminated by error.
Table 3. Bit definition of status register
SR.7 (D7)
SR.6 (D6)
SR.5 (D5)
SR.4 (D4)
SR.3 (D3)
SR.2 (D2)
SR.1 (D1)
SR.0 (D0)
Reserved
Erase Status
Programming Status
Reserved
Symbol
Status
Definition
“1”
“0”
相关PDF资料 |
PDF描述 |
|---|---|
| M37920S4CGP | 16-BIT, 20 MHz, MICROCONTROLLER, PQFP100 |
| M38184E8-XXXFP | 8-BIT, OTPROM, 6.3 MHz, MICROCONTROLLER, PQFP100 |
| M38184EA-XXXFP | 8-BIT, OTPROM, 6.3 MHz, MICROCONTROLLER, PQFP100 |
| M38184EAFP | 8-BIT, OTPROM, 8.4 MHz, MICROCONTROLLER, PQFP100 |
| M38222M2DXXXGP | 8-BIT, MROM, 8 MHz, MICROCONTROLLER, PQFP80 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M37906M4C-XXXFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER |
| M37906M4C-XXXSP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER |
| M37906M4H-XXXFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER |
| M37906M6C-XXXFP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER |
| M37906M6C-XXXSP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:16-BIT CMOS MICROCOMPUTER |
发布紧急采购，3分钟左右您将得到回复。