参数资料
型号: M38037M6H-XXXSP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 8.4 MHz, MICROCONTROLLER, PDIP64
封装: 0.750 INCH, 1.78 MM PITCH, SHRINK, PLASTIC, DIP-64
文件页数: 95/119页
文件大小: 1818K
代理商: M38037M6H-XXXSP
Rev.3.11
Apr 5, 2006
Page 75 of 113
REJ03B0017-0311
3803 Group (Spec.H)
Status Register
The status register shows the operating status of the flash
memory and whether erase operations and programs ended
successfully or in error. It can be read in the following ways:
(1) By reading an arbitrary address from the User ROM area
after writing the read status register command (7016)
(2) By reading an arbitrary address from the User ROM area in
the period from when the program starts or erase operation
starts to when the read array command (FF16) is input.
Also, the status register can be cleared by writing the clear status
register command (5016).
After reset, the status register is set to “8016”.
Table 14 shows the status register. Each bit in this register is
explained below.
Sequencer status (SR7)
The sequencer status indicates the operating status of the flash
memory. This bit is set to “0” (busy) during write or erase
operation and is set to “1” when these operations ends.
After power-on, the sequencer status is set to “1” (ready).
Erase status (SR5)
The erase status indicates the operating status of erase operation.
If an erase error occurs, it is set to “1”. When the erase status is
cleared, it is reset to “0”.
Program status (SR4)
The program status indicates the operating status of write
operation.
When a write error occurs, it is set to “1”.
The program status is reset to “0” when it is cleared.
If “1” is written for any of the SR5 and SR4 bits, the read array,
program, and block erase commands are not accepted. Before
executing these commands, execute the clear status register
command (5016) and clear the status register.
Also, if any commands are not correct, both SR5 and SR4 are set
to “1”.
Table 14
Definition of each bit in status register
Each bit of
SRD bits
Status name
Definition
“1”
“0”
SR7 (bit7)
Sequencer status
Ready
Busy
SR6 (bit6)
Reserved
SR5 (bit5)
Erase status
Terminated in error
Terminated normally
SR4 (bit4)
Program status
Terminated in error
Terminated normally
SR3 (bit3)
Reserved
SR2 (bit2)
Reserved
SR1 (bit1)
Reserved
SR0 (bit0)
Reserved
相关PDF资料
PDF描述
M38513E4FP 8-BIT, OTPROM, 4 MHz, MICROCONTROLLER, PDSO42
M37225M8-XXXSP 8-BIT, MROM, 8.1 MHz, MICROCONTROLLER, PDIP42
M37272EFFP 8-BIT, OTPROM, 8.1 MHz, MICROCONTROLLER, PDSO42
M37512FCH-XXXHP 8-BIT, FLASH, 4 MHz, MICROCONTROLLER, PQFP48
M38073E4FS 8-BIT, UVPROM, 4 MHz, MICROCONTROLLER, CQCC80
相关代理商/技术参数
参数描述
M38037M8108F 制造商:Panasonic Industrial Company 功能描述:IC
M38037M8H-194HP#U0 制造商:Renesas Electronics Corporation 功能描述:8BIT CISC - Trays
M38039FFHFP#U0 功能描述:IC 740 MCU FLASH 60K 64QFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 产品培训模块:CAN Basics Part-1 CAN Basics Part-2 Electromagnetic Noise Reduction Techniques Part 1 M16C Product Overview Part 1 M16C Product Overview Part 2 标准包装:1 系列:M16C™ M32C/80/87 核心处理器:M32C/80 芯体尺寸:16/32-位 速度:32MHz 连通性:EBI/EMI,I²C,IEBus,IrDA,SIO,UART/USART 外围设备:DMA,POR,PWM,WDT 输入/输出数:121 程序存储器容量:384KB(384K x 8) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:24K x 8 电压 - 电源 (Vcc/Vdd):3 V ~ 5.5 V 数据转换器:A/D 34x10b,D/A 2x8b 振荡器型:内部 工作温度:-20°C ~ 85°C 封装/外壳:144-LQFP 包装:托盘 产品目录页面:749 (CN2011-ZH PDF) 配用:R0K330879S001BE-ND - KIT DEV RSK M32C/87
M38039FFHHP 功能描述:MCU 3/5V 56K+4K 64-LQFP RoHS:否 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:740/38000 标准包装:250 系列:56F8xxx 核心处理器:56800E 芯体尺寸:16-位 速度:60MHz 连通性:CAN,SCI,SPI 外围设备:POR,PWM,温度传感器,WDT 输入/输出数:21 程序存储器容量:40KB(20K x 16) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:6K x 16 电压 - 电源 (Vcc/Vdd):2.25 V ~ 3.6 V 数据转换器:A/D 6x12b 振荡器型:内部 工作温度:-40°C ~ 125°C 封装/外壳:48-LQFP 包装:托盘 配用:MC56F8323EVME-ND - BOARD EVALUATION MC56F8323
M38039FFH-HP#U 制造商:Renesas Electronics Corporation 功能描述:8BIT 740 CISC 56KB FLASH 16.8MHZ 3.3/5V - Trays