- 您现在的位置：买卖IC网 > PDF目录98008 > M66290AGP UNIVERSAL SERIAL BUS CONTROLLER, PQFP48 PDF资料下载
参数资料
| 型号： | M66290AGP |
| 元件分类： | 总线控制器 |
| 英文描述： | UNIVERSAL SERIAL BUS CONTROLLER, PQFP48 |
| 封装： | LQFP-48 |
| 文件页数： | 35/54页 |
| 文件大小： | 452K |
| 代理商： | M66290AGP |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页当前第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页
USB DEVICE CONTROLLER
M66290AGP/FP
MITSUBISHI <DIGITAL ASSP>
39
Set the maximum data size (Byte) to transmit/receive in one packet
transfer.
Set the value of wMaxPacketSize in request.
When this bit is set to "1", FIFO data register becomes 8-bit mode and
when accessed "FIFO Data Register" of endpoint, lower 8bit[7:0]
becomes effective.
When transmit odd number of byte, it is needed to write in 8-bit mode.
When read in 8-bit mode, set to 8-bit mode before data receive.
When the selected endpoint is set to OUT and if this bit is set to "1",
OUT buffer effective flag and read data (number of byte) is cleared.
In this state(OUT buffer does not become effective state), SIE side
writes data from host into OUT buffer but CPU side does not read.
When set this bit to "1", whatever the transfer direction is, endpoint
buffer (all buffer of single/double buffer) are cleared.
When clear the endpoint buffer, set this bit to "1" and then set again to "0".
To set this bit as "1", Null data addition transmit mode is set .
In the endpoint which is set to continuous transmit mode, when
write a multiple data of maximum packet size into buffer and transmit,
Null data is transmitted automatically after transmitted the last packet.
This setting is effective when continuous transmit mode is set.
Set response PID.
00 : NAK
Whatever the buffer state is, do NAK handshake.
01 : BUF
Response PID is selected according to the state of buffer
and sequence toggle bit. (In bulk/interrupt transfer, one of
ACK, NAK, DATA0, and DATA1)
1x : STALL Do STALL handshake.
If the transfer direction of selected endpoint is OUT, when received
data which exceeded maximum packet size (MXPS), it becomes
"1x" (=STALL) automatically.
Bit
Name
Function
Reset
-
0
W/R
Null data
addition
transmit mode
-
040h
W/R
-
0
W/R
-
0
W/R
-
0
W/R
-
00
W/R
10
EPi_
NULMD
EPi_
ACLR
Set the access mode to endpoint buffer.
0 : CPU access mode
1 : DMA transfer mode
Max Packet size
EPi_
MXPS
[9:0]
FIFO access
8 bit mode
EPi_Octl
OUT buffer
automatic
clear mode
DMA transfer mode
EPi_
DMAMD
Response PID
EPi_
PID
[1:0]
11
12
9 to 0
13
15, 14
W/R
USB
S/W
H/W
NULMD
DMAMD
EPi_MXPS[9:0]
Octl
ACLR
EPi_PID[1:0]
D0
D1
D2
D3
D4
D5
D6
D7
D8
D9
D10
D11
D12
D15
D13
D14
(4-8) EPi Configuration Register 1 ( i=1 to 5 )
(Address : EP1=62h, EP2=66h, EP3=6Ah, EP4=6Eh, EP5=72h)
The EPi configuration register 1 must be set in a state of response PID is NAK("00").
相关PDF资料 |
PDF描述 |
|---|---|
| M66290AFP | UNIVERSAL SERIAL BUS CONTROLLER, PQFP48 |
| M66291GP | UNIVERSAL SERIAL BUS CONTROLLER, PQFP48 |
| M68HC08AZ0 | 8-BIT, EEPROM, 8 MHz, MICROCONTROLLER, PQFP100 |
| M69030 | GRAPHICS PROCESSOR, PBGA278 |
| MA4T85633 | C BAND, Si, NPN, RF SMALL SIGNAL TRANSISTOR |
相关代理商/技术参数 |
参数描述 |
|---|---|
| M66291GP | 制造商:Renesas Electronics Corporation 功能描述: |
| M66291GP#201 | 制造商:Renesas Electronics Corporation 功能描述:IC ASSP USB2.0 DEVICE CONTROLLER 48LQFP |
| M66291GP#RB0S | 功能描述:IC USB CONTROLLER GEN-PUR 48LQFP RoHS:是 类别:集成电路 (IC) >> 接口 - 控制器 系列:- 标准包装:4,900 系列:- 控制器类型:USB 2.0 控制器 接口:串行 电源电压:3 V ~ 3.6 V 电流 - 电源:135mA 工作温度:0°C ~ 70°C 安装类型:表面贴装 封装/外壳:36-VFQFN 裸露焊盘 供应商设备封装:36-QFN（6x6） 包装:* 其它名称:Q6396337A |
| M66291GPRB0S | 制造商:Renesas Electronics Corporation 功能描述:USB2.0 Device Controller,LQFP48 |
| M66291HP | 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:ASSP (USB2.0 Device Controller) |
发布紧急采购，3分钟左右您将得到回复。