参数资料
型号: MB9BF505NBGL
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 80 MHz, RISC MICROCONTROLLER, PBGA112
封装: 10 X 10 MM, 1.45 MM HEIGHT, 0.80 MM PITCH, PLASTIC, FBGA-112
文件页数: 8/120页
文件大小: 1277K
代理商: MB9BF505NBGL
105
8266D-MCU Wireless-06/12
ATmega128RFA1
encryption operation. However, the initial AES key written to the security module in
advance of an AES run is not modified during an AES operation. This initial key is used
for the next AES run even if it cannot be read from AES_KEY register. Note that the
AES_KEY register is cleared when entering the radio transceiver SLEEP state.
Bit 7:0 – AES_KEY7:0 - AES Encryption/Decryption Key Buffer
These bits represent the data buffer for the AES Encryption/Decryption key.
9.12.5 TRX_STATUS – Transceiver Status Register
Bit
7
6
5
4
NA ($141)
CCA_DONE
CCA_STATUS
TST_STATUS
TRX_STATUS4
TRX_STATUS
Read/Write
R
Initial Value
0
Bit
3
2
1
0
NA ($141)
TRX_STATUS3
TRX_STATUS2
TRX_STATUS1
TRX_STATUS0
TRX_STATUS
Read/Write
R
Initial Value
0
This read-only register signals the present state of the radio transceiver as well as the
status of the CCA operation. A state change is initiated by writing a state transition
command to the TRX_CMD bits of register TRX_STATE. The register is not accessible
in SLEEP state.
Bit 7 – CCA_DONE - CCA Algorithm Status
This bit indicates if a CCA request is completed. This is also indicated by a
TRX24_CCA_ED_DONE interrupt. Note that register bit CCA_DONE is cleared in
response to a CCA_REQUEST.
Table 9-30 CCA_DONE Register Bits
Register Bits
Value
Description
0
CCA calculation not finished
CCA_DONE
1
CCA calculation finished
Bit 6 – CCA_STATUS - CCA Status Result
The result of the CCA measurement is available in register bit CCA_STATUS after a
CCA request is completed. Note that register bit CCA_STATUS is cleared in response
to a CCA_REQUEST.
Table 9-31 CCA_STATUS Register Bits
Register Bits
Value
Description
0
Channel indicated as busy.
CCA_STATUS
1
Channel indicated as idle.
Bit 5 – TST_STATUS - Test mode status
This bit is reserved for internal use. It indicates the status of the test mode.
Table 9-32 TST_STATUS Register Bits
Register Bits
Value
Description
0
Test mode is disabled.
TST_STATUS
1
Test mode is active.
相关PDF资料
PDF描述
MC68HC11ED0CFN2 8-BIT, 2 MHz, MICROCONTROLLER, PQCC44
MSM80C31-JS 8-BIT, 12 MHz, MICROCONTROLLER, PQCC44
MSM80C50-RS 8-BIT, MROM, 11 MHz, MICROCONTROLLER, PDIP40
MSM83C154-1TS-K 8-BIT, MROM, 16 MHz, MICROCONTROLLER, PQFP44
MAB8032AH-2-15P 8-BIT, 15 MHz, MICROCONTROLLER, PDIP40
相关代理商/技术参数
参数描述
MB9BF506NABGL-GE1 制造商:FUJITSU 功能描述:MCU 32BIT CORTEX-M3 FM3 112BGA 制造商:FUJITSU 功能描述:MCU, 32BIT, CORTEX-M3, FM3, 112BGA, Controller Family/Series:ARM Cortex-M3, Core
MB9BF506NAPMC-G-JNE1 制造商:FUJITSU 功能描述: 制造商:FUJITSU 功能描述:MCU 32BIT CORTEX-M3 FM3 100LQFP 制造商:FUJITSU 功能描述:MCU, 32BIT, CORTEX-M3, FM3, 100LQFP 制造商:FUJITSU 功能描述:MCU, 32BIT, CORTEX-M3, FM3, 100LQFP, Controller Family/Series:ARM Cortex-M3, Core Size:32bit, No. of I/O's:80, Supply Voltage Min:2.7V, Supply Voltage Max:5.5V, Digital IC Case Style:LQFP, No. of Pins:100, Program Memory Size:512KB, , RoHS Compliant: Yes
MB9BF506NBBGL-GE1 制造商:FUJITSU 功能描述:
MB9BF506NBPMC-G-JNE2 制造商:FUJITSU 功能描述:
MB9BF506NPMC-ESE1 制造商:FUJITSU 功能描述: