- 您现在的位置：买卖IC网 > PDF目录16630 > MC33912BACR2 (Freescale Semiconductor)IC SYSTEM BASIS CHIP 32LQFP PDF资料下载
参数资料
| 型号： | MC33912BACR2 |
| 厂商： | Freescale Semiconductor |
| 文件页数： | 80/95页 |
| 文件大小： | 0K |
| 描述： | IC SYSTEM BASIS CHIP 32LQFP |
| 标准包装： | 2,000 |
| 应用： | 系统基础芯片 |
| 电流 - 电源： | 4.5mA |
| 电源电压： | 5.5 V ~ 27 V |
| 工作温度： | -40°C ~ 125°C |
| 安装类型： | 表面贴装 |
| 封装/外壳： | 32-LQFP |
| 供应商设备封装： | 32-LQFP（7x7） |
| 包装： | 带卷 (TR) |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页第27页第28页第29页第30页第31页第32页第33页第34页第35页第36页第37页第38页第39页第40页第41页第42页第43页第44页第45页第46页第47页第48页第49页第50页第51页第52页第53页第54页第55页第56页第57页第58页第59页第60页第61页第62页第63页第64页第65页第66页第67页第68页第69页第70页第71页第72页第73页第74页第75页第76页第77页第78页第79页当前第80页第81页第82页第83页第84页第85页第86页第87页第88页第89页第90页第91页第92页第93页第94页第95页
MC33912BAC / MC34912BAC
FUNCTIONAL DEVICE OPERATIONS
OPERATIONAL MODES
Current Limit (LIN Interrupt)
The output low side FET is protected against over-current
conditions. In case of an over-current condition (e.g. LIN bus
short to V BAT ), the transmitter will not be shut down. The bit
LINOC in the LIN Status Register (LINSR) is set.
If the LINM bit is set in the Interrupt Mask Register (IMR), an
Interrupt IRQ will be generated.
Over-temperature Shutdown (LIN Interrupt)
The output low side FET is protected against over-
temperature conditions. In case of an over-temperature
condition, the transmitter will be shut down and the LINOT bit
in the LIN Status Register (LINSR) is set.
If the LINM bit is set in the Interrupt Mask Register (IMR), an
Interrupt IRQ will be generated.
The transmitter is automatically re-enabled once the
condition is gone and TXD is high.
A read of the LIN Status Register (LINSR) with the TXD pin
high, will re-enable the transmitter.
RXD Short-circuit Detection (LIN Interrupt)
The LIN transceiver has a short-circuit detection for the RXD
output pin. In case of an short-circuit condition, either 5V or
Ground, the RXSHORT bit in the LIN Status Register
(LINSR) is set and the transmitter is shut down.
If the LINM bit is set in the Interrupt Mask Register (IMR), an
Interrupt IRQ will be generated.
The transmitter is automatically re-enabled once the
condition is gone (transition on RXD) and TXD is high.
A read of the LIN Status Register (LINSR) without the RXD
pin short-circuit condition will clear the bit RXSHORT.
TXD Dominant Detection (LIN Interrupt)
The LIN transceiver monitors the TXD input pin to detect a
stuck in dominant (0V) condition. In case of a stuck condition
(TXD pin 0 V for more than 1 second (typ.)), the transmitter is
shut down and the TXDOM bit in the LIN Status Register
(LINSR) is set.
If the LINM bit is set in the IMR, an Interrupt IRQ will be
generated.
The transmitter is automatically re-enabled once TXD is high.
A read of the LIN Status Register (LINSR) with the TXD pin
at 5.0 V will clear the bit TXDOM.
LIN Dominant Voltage Level Selection
The LIN dominant voltage level can be selected by the bit
LDVS in the LIN Control Register (LINCR).
LIN Receiver Operation Only
While in Normal mode, the activation of the RXONLY bit
disables the LIN TXD driver. If case of a LIN error condition,
this bit is automatically set. If a low-power mode is selected
with this bit set, the LIN wake-up functionality is disabled,
then in STOP mode, the RXD pin will reflect the state of the
LIN bus.
STOP Mode And Wake-up Feature
During Stop mode operation, the transmitter of the physical
layer is disabled. If the LIN-PU bit was set in the Stop mode
sequence, the internal pull-up resistor is disconnected from
VSUP and a small current source keeps the LIN pin in the
recessive state. The receiver is still active and able to detect
wake-up events on the LIN bus line.
A dominant level longer than T PROPWL followed by a rising
edge will generate a wake-up interrupt, and will be reported
SLEEP Mode And Wake-up Feature
During Sleep mode operation, the transmitter of the physical
layer is disabled. If the LIN-PU bit was set in the Sleep mode
sequence, the internal pull-up resistor is disconnected from
V SUP and a small current source keeps the LIN pin in
recessive state. The receiver must be active to detect wake-
up events on the LIN bus line.
A dominant level longer than T PROPWL followed by a rising
edge will generate a system wake-up (Reset), and will be
reported in the Interrupt Source Register (ISR). Also see
33912
Analog Integrated Circuit Device Data ?
80
Freescale Semiconductor
相关PDF资料 |
PDF描述 |
|---|---|
| EMC08DREN-S734 | CONN EDGECARD 16POS .100 EYELET |
| MC33912BAC | IC SYSTEM BASIS CHIP 32LQFP |
| EEC26DREI-S734 | CONN EDGECARD 52POS .100 EYELET |
| H3DKH-1406M | IDC CABLE - HKR14H/AE14M/HPK14H |
| EMC08DREH-S734 | CONN EDGECARD 16POS .100 EYELET |
相关代理商/技术参数 |
参数描述 |
|---|---|
| MC33912G5AC | 功能描述:LIN 收发器 SBC LIN 2.5G RoHS:否 制造商:NXP Semiconductors 工作电源电压: 电源电流: 最大工作温度: 封装 / 箱体:SO-8 |
| MC33912G5ACR2 | 功能描述:LIN 收发器 SBC LIN 2.5G RoHS:否 制造商:NXP Semiconductors 工作电源电压: 电源电流: 最大工作温度: 封装 / 箱体:SO-8 |
| MC33916 | 制造商:PRIVATE LABEL 功能描述:DC Brushless Fan, 70x70x25mm, 12VDC Ball |
| MC33919 | 制造商:PRIVATE LABEL 功能描述:FAN |
| MC33926PNB | 功能描述:马达/运动/点火控制器和驱动器 THROTTLE CTRL H-BRIDGE RoHS:否 制造商:STMicroelectronics 产品:Stepper Motor Controllers / Drivers 类型:2 Phase Stepper Motor Driver 工作电源电压:8 V to 45 V 电源电流:0.5 mA 工作温度:- 25 C to + 125 C 安装风格:SMD/SMT 封装 / 箱体:HTSSOP-28 封装:Tube |
发布紧急采购，3分钟左右您将得到回复。