参数资料
型号: MC33989DW
厂商: Freescale Semiconductor
文件页数: 52/72页
文件大小: 0K
描述: IC SYSTEM BASE W/CAN 28-SOIC
标准包装: 26
控制器类型: 系统基础芯片
接口: CAN
电源电压: 5.5 V ~ 18 V
电流 - 电源: 45mA
工作温度: -40°C ~ 125°C
安装类型: 表面贴装
封装/外壳: 28-SOIC(0.295",7.50mm 宽)
供应商设备封装: 28-SOIC W
包装: 管件
配用: KIT33989DWEVB-ND - KIT EVAL 33989DW HS SBC
Analog Integrated Circuit Device Data
56
Freescale Semiconductor
33989
TYPICAL APPLICATIONS
SUPPLEMENTAL APPLICATION NOTES
CAN Driver Overtemperature:
In case of an overtemperature condition at the CANH or CANL driver, the driver will be automatically disabled and the THERM
bit set in the CAN register. If enabled, an interrupt will be signalled. The GFAIL flag is set in the MCR register.
When the CAN is in an overtemperature situation, the device is no longer able to transmit. As soon as the temperature is below
the overtemperature level minus hysteresis, the CAN driver is automatically re-enabled.
The THERM bit is latched and two conditions are necessary to clear it:
No longer “CAN overtemperature situation” AND
Read operation of the CAN register.
Overcurrent Detection:
The CAN interface can detect and signal overcurrent condition, occurring for instance in case of CANL shorted to VBAT. This
is signalled by the bit CUR in the CAN register. An INT can be enabled, and GFAIL bit is set. The CUR bit is latched and two
conditions are necessary to clear it:
No longer “CAN overcurrent situation” AND
Read operation of the CAN register.
Protection
The MC33989 CAN output is protected for automotive environments.
The CAN driver is protected against overtemperature and overcurrent.
ISO7637 Transient
The CANH and CANL are rated from +40 Vdc to -27 Vdc. This means that the MC33989 CAN output can handle failure
situations like the bus directly shorted to the battery line in a load dump situation (+40 V).
Ground disconnection of the module will lead to the CANH and CANL line floating high to the VBAT supply. The rest of the
network will not be affected. However the CANH and CANL lines of the ungrounded module will see a negative voltage of the
VBAT value, with respect to their gnd level. Such situations can be handled by the CAN interface of the MC33989, but also in
cases of a jump start (battery at 27 V) and gnd disconnection.
Fast transient pulses, ISO7637-3. During these pulses, the maximum rating of the CANH and CANL lines of +40 Vdc and -27
Vdc must be respected.
ESD
The CANH and CANL line of the MC33989 are rated at ±4.0 kV. An external capacitor between CANH and CANL to gnd or a
zener diode suppressor can be added to ensure a higher module resistance to ESD.
Current in Case of Bus Short Conditions
In case of short-circuit condition on the CAN bus the current in the CAN supply, the CAN line can be different from the nominal
case. The Figure 44 and Table 36 describe the various cases.
Figure 44. Current in Case of Bus Short Conditions
V2 Terminal
60 ohms
CANH line
CAN L line
I_H
I_L
I_TERM
CANH
CANL
5V
VBAT
5V
VBAT
相关PDF资料
PDF描述
MC33889DW IC SYSTEM BASE W/CAN 28-SOIC
MC33389CDW IC SYSTEM BASE W/CAN 28-SOIC
MC33388DR2 IC TOLERANT CAN INT FAULT 14SOIC
PX0414 CONN SMB JACK PNL MNT RG174
PIC16LF1937-E/PT IC PIC MCU FLASH 512KX14 44-TQFP
相关代理商/技术参数
参数描述
MC33989DWR2 功能描述:CAN 接口集成电路 SBC HIGH SPEED RoHS:否 制造商:Texas Instruments 类型:Transceivers 工作电源电压:5 V 电源电流: 工作温度范围:- 40 C to + 85 C 封装 / 箱体:SOIC-8 封装:Tube
MC33989PEG 功能描述:CAN 接口集成电路 SBC-HS RoHS:否 制造商:Texas Instruments 类型:Transceivers 工作电源电压:5 V 电源电流: 工作温度范围:- 40 C to + 85 C 封装 / 箱体:SOIC-8 封装:Tube
MC33989PEGR2 功能描述:CAN 接口集成电路 SBC-HS RoHS:否 制造商:Texas Instruments 类型:Transceivers 工作电源电压:5 V 电源电流: 工作温度范围:- 40 C to + 85 C 封装 / 箱体:SOIC-8 封装:Tube
MC33990D 功能描述:IC TRANSCEIVER J-1850 BUS 8-SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:1,000 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-SOIC(0.295",7.50mm 宽) 供应商设备封装:16-SOIC 包装:带卷 (TR)
MC33990DR2 功能描述:IC TRANSCEIVER J-1850 BUS 8-SOIC RoHS:否 类别:集成电路 (IC) >> 接口 - 驱动器,接收器,收发器 系列:- 标准包装:1,000 系列:- 类型:收发器 驱动器/接收器数:2/2 规程:RS232 电源电压:3 V ~ 5.5 V 安装类型:表面贴装 封装/外壳:16-SOIC(0.295",7.50mm 宽) 供应商设备封装:16-SOIC 包装:带卷 (TR)