参数资料
型号: MC56F8155VFGE
厂商: Freescale Semiconductor
文件页数: 16/172页
文件大小: 0K
描述: IC DSP 16BIT 40MHZ 128-LQFP
标准包装: 72
系列: 56F8xxx
核心处理器: 56800E
芯体尺寸: 16-位
速度: 40MHz
连通性: EBI/EMI,SCI,SPI
外围设备: POR,PWM,WDT
输入/输出数: 49
程序存储器容量: 256KB(128K x 16)
程序存储器类型: 闪存
RAM 容量: 8K x 16
电压 - 电源 (Vcc/Vdd): 2.25 V ~ 3.6 V
数据转换器: A/D 16x12b
振荡器型: 外部
工作温度: -40°C ~ 105°C
封装/外壳: 128-LQFP
包装: 托盘
56F8355 Technical Data, Rev. 17
112
Freescale Semiconductor
Preliminary
6.5.6.10
Reserved—Bit 6
This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing.
6.5.6.11
CTRL—Bit 5
This bit controls the pullup resistors on the WR and RD pins.
6.5.6.12
Reserved—Bit 4
This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing.
6.5.6.13
JTAG—Bit 3
This bit controls the pullup resistors on the TRST, TMS and TDI pins.
6.5.6.14
Reserved—Bit 2–0
This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing.
6.5.7
CLKO Select Register (SIM_CLKOSR)
The CLKO select register can be used to multiplex out any one of the clocks generated inside the clock
generation and SIM modules. The default value is SYS_CLK. This path has been optimized in order to
minimize any delay and clock duty cycle distortion. All other clocks primarily muxed out are for test
purposes only, and are subject to significant phase shift at high frequencies.
The upper four bits of the GPIOB register can function as GPIO, A[23:20], or as additional clock output
signals. GPIO has priority and is enabled/disabled via the GPIOB_PER. If GPIOB[7:4] are programmed
to operate as peripheral outputs, then the choice between A[23:20] and additional clock outputs is done
here in the CLKOSR. The default state is for the peripheral function of GPIOB[7:4] to be programmed as
A[23:20]. This can be changed by altering A[23:20], as shown in Figure 6-9.
Figure 6-9 CLKO Select Register (SIM_CLKOSR)
6.5.7.1
Reserved—Bits 15–10
This bit field is reserved or not implemented. It is read as 0 and cannot be modified by writing.
6.5.7.2
Alternate GPIOB Peripheral Function for A23 (A23)—Bit 9
0 = Peripheral output function of GPIOB7 is defined to be A23
Base + $A
15
14
13
12
11
10
9
8
7
6
5
4
3
2
1
0
Read
0
A23
A22
A21
A20
CLK
DIS
CLKOSEL
Write
RESET
0
001
0
000
0
相关PDF资料
PDF描述
MC56F8156VFVE IC DSP 16BIT 40MHZ 144-LQFP
MC56F8165VFGE IC DSP 16BIT 40MHZ 128-LQFP
MC56F8257VLH DSC 64K FLASH 60MHZ 64-LQFP
MC56F8322VFAE IC DSP 16BIT 60MHZ 48-LQFP
MC56F8323VFBE IC MPU HYBRID DSP 32K 64-LQFP
相关代理商/技术参数
参数描述
MC56F8156 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:16-bit Digital Signal Controllers
MC56F8156VFV 制造商:Rochester Electronics LLC 功能描述:- Bulk 制造商:Freescale Semiconductor 功能描述:
MC56F8156VFVE 功能描述:数字信号处理器和控制器 - DSP, DSC 16 BIT HYBRID CONTROLLER RoHS:否 制造商:Microchip Technology 核心:dsPIC 数据总线宽度:16 bit 程序存储器大小:16 KB 数据 RAM 大小:2 KB 最大时钟频率:40 MHz 可编程输入/输出端数量:35 定时器数量:3 设备每秒兆指令数:50 MIPs 工作电源电压:3.3 V 最大工作温度:+ 85 C 封装 / 箱体:TQFP-44 安装风格:SMD/SMT
MC56F8157 制造商:未知厂家 制造商全称:未知厂家 功能描述:16-BIT HYBRID CONTROLLERS
MC56F8157VPY 制造商:Rochester Electronics LLC 功能描述:- Bulk