参数资料
型号: MC68HC05F4CP
厂商: MOTOROLA INC
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 1.789 MHz, MICROCONTROLLER, PDIP28
封装: PLASTIC, DIP-28
文件页数: 66/130页
文件大小: 2089K
代理商: MC68HC05F4CP
MOTOROLA
4-2
MC68HC05F4
PARALLEL INPUT/OUTPUT PORTS
4
4.2
Port A
Port A is an 8-bit bidirectional port which is equipped with a keyboard interrupt. All eight lines have
internal pull-up resistors, which are required when the port is in input mode. On reset, this port is
congured as a standard I/O port comprising a data register and a data direction register.
Reset does not affect the state of the data register, but clears the data direction register, thereby
returning all ports pins to input mode. Writing a 1 to any DDR bit sets the corresponding port pin
to output mode. As every pin congured as an input contributes to the keyboard interrupt, it is
possible to disable a single pin by conguring it as an output.
4.2.1
Keyboard interrupt
Provided that the interrupt mask bit of the condition code register is cleared, the keyboard interrupt
facility is enabled by setting the keyboard interrupt bit (KIE) in the Key Control register.
On detection of a high-to-low transition, the interrupt inputs PA6 and PA7 are triggered. The trigger
edges of the interrupt lines, PA0–PA5, can be programmed using the EDG0–EDG5 bits in the Key
Control register. If one of these bits is cleared, after reset the corresponding interrupt is
falling-edge sensitive. If, however, one of them is set, after reset the corresponding interrupt is
rising-edge sensitive. The internal pull-up resistors of input lines, PA7–PA0, are disabled, if
rising-edge sensitivity is selected.
When a correct transition is detected, on any of this port’s pins, a keyboard interrupt request is
generated, and the corresponding interrupt status ag of the interrupt status register, IRSTATE, is
set. The interrupt status register is an 8-bit register which has the same address as PORTA,
$0000. This register can be read if the KEYMUX bit in the system option register is set. If KIE is
set, a keyboard interrupt is generated and the keyboard status ag, KF, is set by generating the
logical OR of the eight interrupt state register outputs.
The 8 interrupt state register ags can be reset in three ways:
1) Completely, if the chip is reset.
2) Completely, if a 1 is written to KEYCLR, in the system option register.
3) Individually, if a 1 is written to the corresponding bit position of the interrupt
state register ($00 with KEYMUX = 1, in the system option register).
TPG
36
05F4Book Page 2 Tuesday, August 5, 1997 1:10 pm
相关PDF资料
PDF描述
MK2731-04S 36.864 MHz, VIDEO CLOCK GENERATOR, PDSO16
MC68HC11F1CFN4R2 8-BIT, EEPROM, 4 MHz, MICROCONTROLLER, PQCC68
MC68HC11KS1CFN3 8-BIT, MROM, 3 MHz, MICROCONTROLLER, PQCC68
MB90F548GPF 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP100
MPD78C11AGQA-XXX-36 8-BIT, MROM, 15 MHz, MICROCONTROLLER, PZIP64
相关代理商/技术参数
参数描述
MC68HC05F5 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
MC68HC05F6 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:MCU with DTMF/melody generator
MC68HC05F6P 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
MC68HC05F8 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor(HCMOS) microcontroller unit
MC68HC05J1 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:HCMOS MICROCONTROLLER UNIT