参数资料
型号: MC68HC05F4CP
厂商: MOTOROLA INC
元件分类: 微控制器/微处理器
英文描述: 8-BIT, MROM, 1.789 MHz, MICROCONTROLLER, PDIP28
封装: PLASTIC, DIP-28
文件页数: 72/130页
文件大小: 2089K
代理商: MC68HC05F4CP
MOTOROLA
5-2
MC68HC05F4
CORE TIMER
5
As shown in Figure 5-1, the timer is driven by the internal bus clock divided by four with a xed
prescaler. This signal drives an 8-bit ripple counter. The value of this 8-bit ripple counter can be
read by the CPU at any time, by accessing the CTIMER counter register (CTCR) at address $09.
A timer overow function is implemented on the last stage of this counter, giving a possible
interrupt at the rate of fOP/1024. (The POR signal (tPORL) is also derived from this register, at
fOP/4064.) The counter register circuit is followed by four more stages, with the resulting clock
(fOP/16384) driving the real time interrupt circuit. The RTI circuit consists of three divider stages
with a 1-of-4 selector. The output of the RTI circuit is further divided by 8 to drive the COP
watchdog timer circuit. The RTI rate selector bits, and the RTI and CTIMER overow enable bits
and ags, are located in the CTIMER control and status register (CTCSR) at location $08.
CTOF (core timer overow ag) is a clearable, read-only status bit and is set when the 8-bit ripple
counter rolls over from $FF to $00. A CPU interrupt request will be generated if CTOFE is set.
Clearing the CTOF is done by writing a ‘0’ to it. Writing a ‘1’ to CTOF has no effect on the bit’s
value. Reset clears CTOF.
When CTOFE (core timer overow enable) is set, a CPU interrupt request is generated when the
CTOF bit is set. Reset clears CTOFE.
The core timer counter register (CTCR) is a read-only register that contains the current value of
the 8-bit ripple counter at the beginning of the timer chain. This counter is clocked at fOP/4 and can
be used for various functions including a software input capture. Extended time periods can be
attained using the CTIMER overow function to increment a temporary RAM storage location
thereby simulating a 16-bit (or more) counter.
The power-on cycle clears the entire counter chain and begins clocking the counter. After tPORL
cycles, the power-on reset circuit is released, which again clears the counter chain and allows the
device to come out of reset. At this point, if RESET is not asserted, the timer will start counting up
from zero and normal device operation will begin. When RESET is asserted at any time during
operation (other than POR), the counter chain will be cleared.
5.1
Real time interrupts (RTI)
The real time interrupt circuit consists of a three stage divider and a 1-of-4 selector. The clock
frequency that drives the RTI circuit is fOP/2
14 (or f
OP/16 384), with three additional divider stages,
giving a maximum interrupt period of 4 seconds at a bus frequency (fOP) of 32kHz. Register details
are given in Section 5.2.
TPG
42
05F4Book Page 2 Tuesday, August 5, 1997 1:10 pm
相关PDF资料
PDF描述
MK2731-04S 36.864 MHz, VIDEO CLOCK GENERATOR, PDSO16
MC68HC11F1CFN4R2 8-BIT, EEPROM, 4 MHz, MICROCONTROLLER, PQCC68
MC68HC11KS1CFN3 8-BIT, MROM, 3 MHz, MICROCONTROLLER, PQCC68
MB90F548GPF 16-BIT, FLASH, 16 MHz, MICROCONTROLLER, PQFP100
MPD78C11AGQA-XXX-36 8-BIT, MROM, 15 MHz, MICROCONTROLLER, PZIP64
相关代理商/技术参数
参数描述
MC68HC05F5 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:HCMOS Microcontroller Unit
MC68HC05F6 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:MCU with DTMF/melody generator
MC68HC05F6P 制造商:未知厂家 制造商全称:未知厂家 功能描述:8-Bit Microcontroller
MC68HC05F8 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:High-density complementary metal oxide semiconductor(HCMOS) microcontroller unit
MC68HC05J1 制造商:MOTOROLA 制造商全称:Motorola, Inc 功能描述:HCMOS MICROCONTROLLER UNIT