参数资料
型号: MC8610PX1066JB
厂商: Freescale Semiconductor
文件页数: 49/96页
文件大小: 0K
描述: MPU E600 CORE 1066MHZ 783-PBGA
标准包装: 36
系列: MPC86xx
处理器类型: 32-位 MPC86xx PowerPC
速度: 1.066GHz
电压: 1V
安装类型: 表面贴装
封装/外壳: 783-BBGA,FCBGA
供应商设备封装: 783-FCPBGA(29x29)
包装: 托盘
Electrical Characteristics
MPC8610 Integrated Host Processor Hardware Specifications, Rev. 2
Freescale Semiconductor
53
Figure 15 provides the AC test load for PCI.
Figure 26. PCI AC Test Load
Figure 27 shows the PCI input AC timing conditions.
Figure 27. PCI Input AC Timing Measurement Conditions
HRESET high to first FRAME assertion
tPCRHFV
10
clocks
8, 11
Notes:
1. The symbols used for timing specifications follow the pattern of t(first two letters of functional block)(signal)(state)(reference)(state) for
inputs and t(first two letters of functional block)(reference)(state)(signal)(state) for outputs. For example, tPCIVKH symbolizes PCI timing
(PC) with respect to the time the input signals (I) reach the valid state (V) relative to the SYSCLK clock, tSYS, reference (K)
going to the high (H) state or setup time. Also, tPCRHFV symbolizes PCI timing (PC) with respect to the time hard reset (R)
went high (H) relative to the frame signal (F) going to the valid (V) state.
2. See the timing measurement conditions in the
PCI 2.2 Local Bus Specifications.
3. All PCI signals are measured from OVDD/2 of the rising edge of PCI_SYNC_IN to 0.4 × OVDD of the signal in question for
3.3-V PCI signaling levels.
4. For purposes of active/float timing measurements, the Hi-Z or off state is defined to be when the total current delivered
through the component pin is less than or equal to the leakage current specification.
5. Input timings are measured at the pin.
6. The timing parameter tSYS indicates the minimum and maximum CLK cycle times for the various specified frequencies. The
system clock period must be kept within the minimum and maximum defined ranges. For values see Section 3.1, “System
7. The setup and hold time is with respect to the rising edge of HRESET.
8. The timing parameter tPCRHFV is a minimum of 10 clocks rather than the minimum of 5 clocks in the PCI 2.2 Local Bus
Specifications.
9. The reset assertion timing requirement for HRESET is 100
μs.
10.Guaranteed by characterization.
11.Guaranteed by design.
12. The timing parameter tPCKHOV is a minimum of 1.5 ns and a maximum of 7.4 ns rather than the minimum of 2 ns and a
maximum of 6 ns in the
PCI 2.2 Local Bus Specifications.
13. The timing parameter tPCIVKH is a minimum of 3.7 ns rather than the minimum of 3 ns in the PCI 2.2 Local Bus Specifications.
14. The timing parameter tPCIXKH is a minimum of 0.8 ns rather than the minimum of 0 ns in the PCI 2.2 Local Bus Specifications.
Table 46. PCI AC Timing Specifications at 66 MHz (continued)
Parameter
Symbol1
Min
Max
Unit
Notes
Output
Z0 = 50 Ω
OVDD/2
RL = 50 Ω
tPCIVKH
CLK
Input
tPCIXKH
相关PDF资料
PDF描述
345-012-523-204 CARDEDGE 12POS DUAL .100 GREEN
345-012-523-202 CARDEDGE 12POS DUAL .100 GREEN
345-012-523-201 CARDEDGE 12POS DUAL .100 GREEN
345-012-521-804 CARDEDGE 12POS DUAL .100 GREEN
345-012-521-802 CARDEDGE 12POS DUAL .100 GREEN
相关代理商/技术参数
参数描述
MC8610PX1066JZ 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:MPC8610 Integrated Host Processor Hardware Specifications
MC8610PX1067G 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Integrated Host Processor Hardware Specifications
MC8610PX1067J 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Integrated Host Processor Hardware Specifications
MC8610PX1333JB 功能描述:微处理器 - MPU REV 1.1 8610 1.025V 105C RoHS:否 制造商:Atmel 处理器系列:SAMA5D31 核心:ARM Cortex A5 数据总线宽度:32 bit 最大时钟频率:536 MHz 程序存储器大小:32 KB 数据 RAM 大小:128 KB 接口类型:CAN, Ethernet, LIN, SPI,TWI, UART, USB 工作电源电压:1.8 V to 3.3 V 最大工作温度:+ 85 C 安装风格:SMD/SMT 封装 / 箱体:FBGA-324
MC8610PX1333JZ 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:MPC8610 Integrated Host Processor Hardware Specifications