参数资料
型号: MPC5601PEF0VLL4
厂商: FREESCALE SEMICONDUCTOR INC
元件分类: 微控制器/微处理器
英文描述: 32-BIT, FLASH, 64 MHz, RISC MICROCONTROLLER, PQFP100
封装: 14 X 14 MM, 1.40 MM, 0.50 MM PITCH, ROHS COMPLIANT, LQFP-100
文件页数: 4/95页
文件大小: 1694K
代理商: MPC5601PEF0VLL4
MPC5602P Microcontroller Data Sheet, Rev. 4.1
Freescale Semiconductor
12
Programmable selection of reset or interrupt on an initial time-out
Master access protection
Hard and soft configuration lock bits
Reset configuration inputs allow timer to be enabled out of reset
1.5.15
Fault collection unit (FCU)
The FCU provides an independent fault reporting mechanism even if the CPU is malfunctioning.
The FCU module has the following features:
FCU status register reporting the device status
Continuous monitoring of critical fault signals
User selection of critical signals from different fault sources inside the device
Critical fault events trigger 2 external pins (user selected signal protocol) that can be used externally to reset the device
and/or other circuitry (for example, a safety relay)
Faults are latched into a register
1.5.16
System integration unit – Lite (SIUL)
The MPC5602P SIUL controls MCU pad configuration, external interrupt, general purpose I/O (GPIO), and internal peripheral
multiplexing.
The pad configuration block controls the static electrical characteristics of I/O pins. The GPIO block provides uniform and
discrete input/output control of the I/O pins of the MCU.
The SIUL provides the following features:
Centralized general purpose input output (GPIO) control of up to 49 input/output pins and 16 analog input-only pads
(package dependent)
All GPIO pins can be independently configured to support pull-up, pull-down, or no pull
Reading and writing to GPIO supported both as individual pins and 16-bit wide ports
All peripheral pins, except ADC channels, can be alternatively configured as both general purpose input or output pins
ADC channels support alternative configuration as general purpose inputs
Direct readback of the pin value is supported on all pins through the SIUL
Configurable digital input filter that can be applied to some general purpose input pins for noise elimination
Up to 4 internal functions can be multiplexed onto 1 pin
1.5.17
Boot and censorship
Different booting modes are available in the MPC5602P: booting from internal flash memory and booting via a serial link.
The default booting scheme uses the internal flash memory (an internal pull-down resistor is used to select this mode).
Optionally, the user can boot via FlexCAN or LINFlex (using the boot assist module software).
A censorship scheme is provided to protect the content of the flash memory and offer increased security for the entire device.
A password mechanism is designed to grant the legitimate user access to the non-volatile memory.
1.5.17.1
Boot assist module (BAM)
The BAM is a block of read-only memory that is programmed once and is identical for all MPC560xP devices that are based
on the e200z0h core. The BAM program is executed every time the device is powered on if the alternate boot mode has been
selected by the user.
相关PDF资料
PDF描述
MPC8272CVRP 32-BIT, EPROM, 300 MHz, RISC MICROCONTROLLER, PBGA516
MB95F564HWQN-G-JNE1 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PQCC32
MB95F584KPFT-G-JNE2 8-BIT, FLASH, 16.25 MHz, MICROCONTROLLER, PDSO16
MB9BF105RAPMC 32-BIT, FLASH, 80 MHz, RISC MICROCONTROLLER, PQFP120
MB9BF504NPMC 32-BIT, FLASH, 80 MHz, RISC MICROCONTROLLER, PQFP100
相关代理商/技术参数
参数描述
MPC5601PEF0VLL4R 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:MPC5602P Microcontroller Data Sheet
MPC5601PEF0VLL6R 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:MPC5602P Microcontroller Data Sheet
MPC5602B 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Qorivva MPC560xB/C/D Family
MPC5602BECLQ 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Microcontroller
MPC5602BECLU 制造商:FREESCALE 制造商全称:Freescale Semiconductor, Inc 功能描述:Microcontroller