参数资料
型号: mPD789322
厂商: NEC Corp.
元件分类: 8位微控制器
英文描述: 8-bit Microcontroller with 2/4/8K Bytes In-System Programmable Flash
中文描述: 8位微控制器与2/4/8K字节在系统可编程闪存
文件页数: 94/96页
文件大小: 482K
代理商: MPD789322
Preliminary Product Information U14673EJ1V0PM00
94
PD789322,789324,789326,789327
NOTES FOR CMOS DEVICES
1
PRECAUTION AGAINST ESD FOR SEMICONDUCTORS
Note:
Strong electric field, when exposed to a MOS device, can cause destruction of the gate oxide and
ultimately degrade the device operation. Steps must be taken to stop generation of static electricity
as much as possible, and quickly dissipate it once, when it has occurred. Environmental control
must be adequate. When it is dry, humidifier should be used. It is recommended to avoid using
insulators that easily build static electricity. Semiconductor devices must be stored and transported
in an anti-static container, static shielding bag or conductive material. All test and measurement
tools including work bench and floor should be grounded. The operator should be grounded using
wrist strap. Semiconductor devices must not be touched with bare hands. Similar precautions need
to be taken for PW boards with semiconductor devices on it.
2
HANDLING OF UNUSED INPUT PINS FOR CMOS
Note:
No connection for CMOS device inputs can be cause of malfunction. If no connection is provided
to the input pins, it is possible that an internal input level may be generated due to noise, etc., hence
causing malfunction. CMOS devices behave differently than Bipolar or NMOS devices. Input levels
of CMOS devices must be fixed high or low by using a pull-up or pull-down circuitry. Each unused
pin should be connected to VDD or GND with a resistor, if it is considered to have a possibility of
being an output pin. All handling related to the unused pins must be judged device by device and
related specifications governing the devices.
3
STATUS BEFORE INITIALIZATION OF MOS DEVICES
Note:
Power-on does not necessarily define initial status of MOS device. Production process of MOS
does not define the initial operation status of the device. Immediately after the power source is
turned ON, the devices with reset function have not yet been initialized. Hence, power-on does
not guarantee out-pin levels, I/O settings or contents of registers. Device is not initialized until the
reset signal is received. Reset operation must be executed immediately after power-on for devices
having reset function.
EEPROM is a trademark of NEC Corporation.
Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or
other countries.
PC/AT is a trademark of International Business Machines Corporation.
HP9000 series 700 and HP-UX are trademarks of Hewlett-Packard Company.
SPARCstation is a trademark of SPARC International, Inc.
Solaris and SunOS are trademarks of Sun Microsystems, Inc.
NEWS and NEWS-OS are trademarks of Sony Corporation.
相关PDF资料
PDF描述
mPD789327GB-xxx-8ET 8-bit Microcontroller with 2/4/8K Bytes In-System Programmable Flash
MPDTH03060WAH 1-OUTPUT 25 W DC-DC REG PWR SUPPLY MODULE
MPLC0525L2R2 1 ELEMENT, 2.2 uH, GENERAL PURPOSE INDUCTOR, SMD
MPM21PDA300A 32-BIT, 300 MHz, MICROPROCESSOR, XMA
MPN2-01000200-28P 1000 MHz - 2000 MHz RF/MICROWAVE WIDE BAND MEDIUM POWER AMPLIFIER
相关代理商/技术参数
参数描述
MPD789322GB-XXX-8ET 制造商:NEC 制造商全称:NEC 功能描述:8-BIT SINGLE-CHIP MICROCONTROLLER
MPD789324 制造商:NEC 制造商全称:NEC 功能描述:8-BIT SINGLE-CHIP MICROCONTROLLER
MPD789324GB-XXX-8ET 制造商:NEC 制造商全称:NEC 功能描述:8-BIT SINGLE-CHIP MICROCONTROLLER
MPD789326 制造商:NEC 制造商全称:NEC 功能描述:8-BIT SINGLE-CHIP MICROCONTROLLER
MPD789326GB-XXX-8ET 制造商:NEC 制造商全称:NEC 功能描述:8-BIT SINGLE-CHIP MICROCONTROLLER