- 您现在的位置：买卖IC网 > PDF目录17234 > NCP5214EVB (ON Semiconductor)EVAL BOARD FOR NCP5214 PDF资料下载
参数资料
| 型号： | NCP5214EVB |
| 厂商： | ON Semiconductor |
| 文件页数： | 27/32页 |
| 文件大小： | 0K |
| 描述： | EVAL BOARD FOR NCP5214 |
| 产品变化通告： | Product Obsolescence 24/Jan/2011 |
| 设计资源： | NCP5214EVB BOM NCP5214EVB Gerber Files NCP5214EVB Schematic |
| 标准包装： | 1 |
| 主要目的： | DC/DC，步降 |
| 输出及类型： | 1，非隔离 |
| 输出电压： | 1.8V |
| 电流 - 输出： | 10A |
| 输入电压： | 5V，4.5 ~ 24 V |
| 稳压器拓扑结构： | 降压 |
| 频率 - 开关： | 100Hz ~ 75kHz |
| 板类型： | 完全填充 |
| 已供物品： | 板 |
| 已用 IC / 零件： | NCP5214 |
| 其它名称： | NCP5214EVBOS |
第1页第2页第3页第4页第5页第6页第7页第8页第9页第10页第11页第12页第13页第14页第15页第16页第17页第18页第19页第20页第21页第22页第23页第24页第25页第26页当前第27页第28页第29页第30页第31页第32页
NCP5214
PCB Layout Guidelines
Cautious PCB layout design is very critical to ensure
high performance and stable operation of the DDR power
controller. The following items must be considered when
preparing PCB layout:
1. All high?current traces must be kept as short and
vias with 0.6 mm hole?diameter to help heat
dissipation and ensure good thermal capability. It
is recommended to use PCB with 1 oz or 2 oz
copper foil. The thermal pad can be connected to
either PGND ground plane or AGND ground
plane but not both.
wide as possible to reduce power loss.
High?current traces are the trace from the input
voltage terminal to the drain of the high?side
MOSFET, the trace from the source of the
high?side MOSFET to the inductor, the trace
from inductor to the VDDQ output terminal, the
trace from the input ground terminal to the
VDDQ output ground terminal, the trace from
VDDQ output to VTTI pin, the trace from VTT
pin to VTT output terminal, and the trace from
VTT output ground terminal to the VTTGND pin.
Power handling and heaksinking of high?current
traces can be improved by also routing the same
high?current traces in the other layers and joined
together with multiple vias.
2. Power components which include the input
capacitor, high?side MOSFET, low?side
MOSFET and VDDQ output capacitor of the
buck converter section must be positioned close
together to minimize the current loop. The input
capacitor must be placed close to the drain of the
high?side MOSFET and the source of the
low?side MOSFET.
3. To ensure the proper function of the device,
separated ground connections should be used for
different parts of the application circuit according
to their functions. The input capacitor ground, the
low?side MOSFET source, the VDDQ output
capacitor ground, the VCCP decoupling capacitor
ground should be connected to the PGND. The
trace path connecting the source of the low?side
MOSFET and PGND pin should be minimized.
The VTT output capacitor ground should be
connected to the VTTGND first with a short
trace, it is then connected to the ground plane of
PGND. The VCCA decoupling capacitor ground,
the ground of the VDDQ feedback resistor, the
soft?start capacitor ground, the VTTREF output
capacitor ground should be connected to the
AGND. The AGND pin is then connected directly
through a sense trace to the remote ground sense
point of the PGND, which is usually the ground
of the local bypass capacitor for the load. Never
connect the AGND, PGND and VTTGND
together just under the thermal pad.
4. The thermal pad of the DFN?22 package should
be connected to the ground planes in the internal
layer and bottom layer from the copper pad at top
layer underneath the package through six to eight
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
The input capacitor ground terminal, the VDDQ
output capacitor ground terminal and the source
of the low?side MOSFET must be connected to
the PGND ground plane through multiple vias.
Sensitive traces like trace from FBDDQ, trace
from COMP, trace from OCDDQ, trace from
FBVTT and trace from VTTREF should be
avoided from the high?voltage switching nodes
like SWDDQ, BOOST, TGDDQ and BGDDQ.
Separate sense trace should be used to connect
the VDDQ point of regulation, which is usually
the local bypass capacitor for load, to the
feedback resistor divider to ensure accurate
voltage sensing. The feedback resistor divider
should be place close to the FBDDQ pin.
Separate sense trace should be used to connect the
VTT point of regulation, which is usually the local
bypass capacitor for load, to the FBVTT pin.
Separate sense trace should be used to connect
the VDDQ point of regulation to the DDQREF
pin to ensure that the reference voltage to VTT is
accurately half of the VDDQ voltage.
The traces length between the gate driver outputs
and gates of the MOSFETs must be minimized to
avoid parasitic impedance.
To ensure normal function of the device, an RC
filter should be placed close to the VCCA pin and
a decoupling capacitor should be placed close to
the VCCP pin.
The copper trace area of the switching node which
includes the source of the high?side MOSFET,
drain of the low?side MOSFET and high voltage
side of the inductor should be minimized by using
short wide trace to reduce EMI.
A snubber circuit consists of a 3.3 W resistor and
1.0 nF capacitor may need to be connected across
the switching node and PGND to reduce the
high?frequency ringing occurring at the rising
edge of the switching waveform to obtain more
accurate inductor current limit sensing of the
VDDQ buck converter. However, adding this
snubber circuit will slightly reduce the conversion
efficiency.
VTTI should be connected to VDDQ output with
wide and short trace if VDDQ is used as the
sourcing supply for VTT. An input capacitor of at
least 10 m F should be added close to the VTTI
pin and bypassed to VTTGND if external voltage
supply is used as the VTT sourcing supply.
http://onsemi.com
27
相关PDF资料 |
PDF描述 |
|---|---|
| TC4468CPD | IC MOSFET DVR QUAD AND 14DIP |
| TC4423COE | IC MOSFET DVR 3A DUAL HS 16-SOIC |
| GMC08DREN | CONN EDGECARD 16POS .100 EYELET |
| TC4424COE | IC MOSFET DVR 3A DUAL HS 16-SOIC |
| FESB8GT-E3/45 | DIODE 8A 400V 50NS SGL TO263AB |
相关代理商/技术参数 |
参数描述 |
|---|---|
| NCP5214MNR2 | 功能描述:DC/DC 开关控制器 2-IN-1 NOTBOOK DDR CNTLR RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK |
| NCP5214MNR2G | 功能描述:DC/DC 开关控制器 2-IN-1 NOTBOOK DDR CNTLR RoHS:否 制造商:Texas Instruments 输入电压:6 V to 100 V 开关频率: 输出电压:1.215 V to 80 V 输出电流:3.5 A 输出端数量:1 最大工作温度:+ 125 C 安装风格: 封装 / 箱体:CPAK |
| NCP5215 | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Dual Synchronous Buck Controller for Notebook Power System |
| NCP5215MNR2G | 功能描述:直流/直流开关转换器 BUCK CONTROLLER RoHS:否 制造商:STMicroelectronics 最大输入电压:4.5 V 开关频率:1.5 MHz 输出电压:4.6 V 输出电流:250 mA 输出端数量:2 最大工作温度:+ 85 C 安装风格:SMD/SMT |
| NCP5217A | 制造商:ONSEMI 制造商全称:ON Semiconductor 功能描述:Single Synchronous Step-Down Controller |
发布紧急采购，3分钟左右您将得到回复。