参数资料
型号: OM11078
厂商: NXP Semiconductors
文件页数: 1/57页
文件大小: 0K
描述: KIT LCD TOUCH 5.7" FOR LPC3250
标准包装: 1
传感器类型: 触摸屏幕
电源电压: 5V
嵌入式: 是,MCU,16/32 位
已供物品: 主板,LPC3250 板,LCD 触摸屏板,线缆,CD,调试器,电源
已用 IC / 零件: LPC3250 ARM9
配用: 568-4744-ND - MODULE DIMM LPC3250 ARM9
568-4742-ND - MODULE DIMM LPC2478 ARM7
相关产品: 568-4533-ND - IC ARM9 MCU 256K 296-TFBGA
其它名称: 568-4743
1.
General description
The LPC3220/30/40/50 embedded microcontrollers were designed for low power, high
performance applications. NXP achieved their performance goals using a 90 nanometer
process to implement an ARM926EJ-S CPU core with a vector floating point co-processor
and a large set of standard peripherals including USB On-The-Go. The
LPC3220/30/40/50 operates at CPU frequencies of up to 266 MHz.
The NXP implementation uses a ARM926EJ-S CPU core with a Harvard architecture,
5-stage pipeline, and an integral Memory Management Unit (MMU). The MMU provides
the virtual memory capabilities needed to support the multi-programming demands of
modern operating systems. The ARM926EJ-S also has a hardware based set of DSP
instruction extensions, which includes single cycle MAC operations, and hardware based
native Jazelle Java Byte-code execution. The NXP implementation has a 32 kB
instruction cache and a 32 kB data cache.
For low power consumption, the LPC3220/30/40/50 takes advantage of NXP’s advanced
technology development to optimize intrinsic power and uses software controlled
architectural enhancements to optimize application based power management.
The LPC3220/30/40/50 also includes 256 kB of on-chip static RAM, a NAND flash
interface, an Ethernet MAC, an LCD controller that supports STN and TFT panels, and an
external bus interface that supports SDR and DDR SDRAM as well as static devices. In
addition, the LPC3220/30/40/50 includes a USB 2.0 full-speed interface, seven UARTs,
two I2C-bus interfaces, two SPI/SSP ports, two I2S-bus interfaces, two single output
PWMs, a motor control PWM, six general purpose timers with capture inputs and compare
outputs, a Secure Digital (SD) interface, and a 10-bit Analog-to-Digital Converter (ADC)
with a touch screen sense option.
2.
Features and benefits
ARM926EJ-S processor, running at CPU clock speeds up to 266 MHz.
Vector Floating Point (VFP) coprocessor.
32 kB instruction cache and 32 kB data cache.
Up to 256 kB of Internal SRAM (IRAM).
Selectable boot-up from various external devices: NAND flash, SPI memory, USB,
UART, or static memory.
Multi-layer AHB system that provides a separate bus for each AHB master, including
both an instruction and data bus for the CPU, two data busses for the DMA controller,
and another bus for the USB controller, one for the LCD, and a final one for the
Ethernet MAC. There are no arbitration delays in the system unless two masters
attempt to access the same slave at the same time.
LPC3220/30/40/50
16/32-bit ARM microcontrollers; hardware floating-point
coprocessor, USB On-The-Go, and EMC memory interface
Rev. 2 — 20 October 2011
Product data sheet
相关PDF资料
PDF描述
24180C INDUCTOR 18UH 1.26A SMD
LTC1558CS-5#TRPBF IC BACKUP BATT CNTRLR 5V 16-SOIC
DK-57TS-LPC3250 KIT LCD TOUCH 5.7" FOR LPC3250
594D107X9016C2W CAP TANT 100UF 16V 10% 2812
C8051F020DK DEV KIT FOR F020/F021/F022/F023
相关代理商/技术参数
参数描述
OM11078,598 功能描述:开发板和工具包 - ARM NXP LPC3250 IRD2.0-5.7"LCD/Lnx RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V
OM11079 功能描述:MODULE DIMM LPC3250 ARM9 RoHS:是 类别:编程器,开发系统 >> 配件 系列:- 标准包装:1 系列:- 附件类型:适配器板 适用于相关产品:RCB230,RCB231,RCB212 配用:26790D-ND - RCB BREAKOUT BOARD RS232 CABLE
OM11079,598 功能描述:开发板和工具包 - ARM NXP LPC3250 SODIMM for IRD2.0 RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V
OM11080,598 制造商:NXP Semiconductors 功能描述:LPC1768 CORTEX-M3 3.2" 2X40 LCD DISPLAY KIT, ARM CORTEX-M3 M - Boxed Product (Development Kits)
OM11082,598 功能描述:开发板和工具包 - ARM NXP LPC3250 IRD2.0-5.7"LCD/Lnx RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V