参数资料
型号: OM11078
厂商: NXP Semiconductors
文件页数: 24/57页
文件大小: 0K
描述: KIT LCD TOUCH 5.7" FOR LPC3250
标准包装: 1
传感器类型: 触摸屏幕
电源电压: 5V
嵌入式: 是,MCU,16/32 位
已供物品: 主板,LPC3250 板,LCD 触摸屏板,线缆,CD,调试器,电源
已用 IC / 零件: LPC3250 ARM9
配用: 568-4744-ND - MODULE DIMM LPC3250 ARM9
568-4742-ND - MODULE DIMM LPC2478 ARM7
相关产品: 568-4533-ND - IC ARM9 MCU 256K 296-TFBGA
其它名称: 568-4743
LPC3220_30_40_50
All information provided in this document is subject to legal disclaimers.
NXP B.V. 2011. All rights reserved.
Product data sheet
Rev. 2 — 20 October 2011
30 of 79
NXP Semiconductors
LPC3220/30/40/50
16/32-bit ARM microcontrollers
extended wait
Power-saving modes dynamically control EMC_CKE[1:0] and EMC_CLK.
Dynamic memory self-refresh mode supported by software.
Controller supports 2 k, 4 k, and 8 k row address synchronous memory parts. That is,
typical 512 MB, 256 MB, 128 MB, and 16 MB parts, with 8, 16, or 32 data bits per
device.
Two reset domains enable dynamic memory contents to be preserved over a soft
reset.
This controller does not support synchronous static memory devices (burst mode
devices).
7.6 AHB master peripherals
The LPC3220/30/40/50 implements four AHB master peripherals, which include a
General Purpose Direct Memory Access (GPDMA) controller, a 10/100 Ethernet Media
Access Controller (MAC), a Universal Serial Bus (USB) controller, and an LCD controller.
Each of these four peripherals contain an integral DMA controller optimized to support the
performance demands of the peripheral.
7.6.1 General Purpose DMA (GPDMA) controller
The GPDMA controller allows peripheral-to memory, memory-to-peripheral,
peripheral-to-peripheral, and memory-to-memory transactions. Each DMA stream
provides unidirectional serial DMA transfers for a single source and destination. For
example, a bidirectional port requires one stream for transmit and one for receive. The
source and destination areas can each be either a memory region or a peripheral, and
can be accessed through the same AHB master, or one area by each master. The DMA
controller supports the following peripheral device transfers.
Secure Digital (SD) Memory interface
High-speed UARTs
I2S0 and I2S1 ports
SPI1 and SPI2 interfaces
SSP0 and SSP1 interfaces
Memory
The DMA controls eight DMA channels with hardware prioritization. The DMA controller
interfaces to the system via two AHB bus masters, each with a full 32-bit data bus width.
DMA operations may be set up for 8-bit, 16-bit, and 32-bit data widths, and can be either
big-endian or little-endian. Incrementing or non-incrementing addressing for source and
destination are supported, as well as programmable DMA burst size. Scatter or gather
DMA is supported through the use of linked lists. This means that the source and
destination areas do not have to occupy contiguous areas of memory.
7.6.2 Ethernet MAC
The Ethernet block contains a full featured 10 Mbit/s or 100 Mbit/s Ethernet MAC
designed to provide optimized performance through the use of DMA hardware
acceleration. Features include a generous suite of control registers, half or full duplex
operation, flow control, control frames, hardware acceleration for transmit retry, receive
相关PDF资料
PDF描述
24180C INDUCTOR 18UH 1.26A SMD
LTC1558CS-5#TRPBF IC BACKUP BATT CNTRLR 5V 16-SOIC
DK-57TS-LPC3250 KIT LCD TOUCH 5.7" FOR LPC3250
594D107X9016C2W CAP TANT 100UF 16V 10% 2812
C8051F020DK DEV KIT FOR F020/F021/F022/F023
相关代理商/技术参数
参数描述
OM11078,598 功能描述:开发板和工具包 - ARM NXP LPC3250 IRD2.0-5.7"LCD/Lnx RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V
OM11079 功能描述:MODULE DIMM LPC3250 ARM9 RoHS:是 类别:编程器,开发系统 >> 配件 系列:- 标准包装:1 系列:- 附件类型:适配器板 适用于相关产品:RCB230,RCB231,RCB212 配用:26790D-ND - RCB BREAKOUT BOARD RS232 CABLE
OM11079,598 功能描述:开发板和工具包 - ARM NXP LPC3250 SODIMM for IRD2.0 RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V
OM11080,598 制造商:NXP Semiconductors 功能描述:LPC1768 CORTEX-M3 3.2" 2X40 LCD DISPLAY KIT, ARM CORTEX-M3 M - Boxed Product (Development Kits)
OM11082,598 功能描述:开发板和工具包 - ARM NXP LPC3250 IRD2.0-5.7"LCD/Lnx RoHS:否 制造商:Arduino 产品:Development Boards 工具用于评估:ATSAM3X8EA-AU 核心:ARM Cortex M3 接口类型:DAC, ICSP, JTAG, UART, USB 工作电源电压:3.3 V