收藏本站
参数资料
型号： PM4314-RI
厂商： PMC-SIERRA INC
元件分类： 数字传输电路
英文描述： QUAD T1/E1 LINE INTERFACE DEVICE
中文描述： DATACOM, PCM TRANSCEIVER, PQFP128
封装： PLASTIC, QFP-128
文件页数： 76/170页
文件大小： 823K
代理商： PM4314-RI
PM4314 QDSX
DATA SHEET
PMC-950857
ISSUE 5
QUAD T1/E1 LINE INTERFACE DEVICE
PROPRIETARY AND CONFIDENTIAL TO PMC-SIERRA, INC., AND FOR ITS CUSTOMERS’ INTERNAL USE
64
RXAISEN:
When RXAISEN is set to logic 1, an AIS is presented on the RDD/RDP[X]
and RDN[X] outputs. When RDD[X] is enabled, RDD[X] will be held always
high. If RDP[X] and RDN[X] are enabled, an alternating ones pattern (i.e. a
sequence of AMI coded ones) will be presented on RDP and RDN. Note that
the RDPINV and RDNINV bits will invert the inserted AIS signal in the same
way as other data. When RXAISEN is set to logic 0, RDD/RDP[X] and
RDN[X] carry data normally.
TXAISEN:
When the TXAISEN bit is set to logic one, an AIS signal is inserted on
TXTIP[X] and TXRING. This AIS signal consists of an AMI-encoded all-ones
sequence. When TXAIS is set to logic zero, TXTIP[X] and TXRING[X] carry
data as normal.
DIALB:
The DIALB bit selects the diagnostic digital loopback mode, where the
transmit data stream is connected to the receive data stream. When DIALB
is set to logic 1, the diagnostic digital loopback mode is enabled. When DIALB
is set to logic 0, the diagnostic digital loopback mode is disabled.
DMLB:
The DMLB bit enables the diagnostic metallic loopback mode, where the
digital, RZ positive and negative sliced versions of the analog signals output
on the TXTIP[X] and TXRING[X] pins from XPLS are internally connected to
the receive positive and negative pulse inputs of CDRC. When DMLB is set
to logic 1, the diagnostic metallic loopback mode is enabled. When DMLB is
set to logic 0, the diagnostic metallic loopback mode is disabled. Because
diagnostic metallic loopback is essentially a zero-line-length loopback, the 0’-
110’ line build out should be selected when using DMLB in T1 operation.
LINELB:
The LINELB bit selects the line loopback mode, where the data input on
RXTIP[X] and RXRING[X] is passed through the CDRC and then through
DJAT before being retransmitted on TXTIP[X] and TXRING[X] respectively.
When LINELB is set to logic 1, the line loopback mode is enabled. When
LINELB is set to logic 0, line loopback mode is disabled. Line loopback
should not be enabled in the QDSX unless DJAT is enabled in the transmit
path.
相关PDF资料
PDF描述
PM4318 OCTAL E1/T1/J1 LINE INTERFACE DEVICE
PM4318-BI OCTAL E1/T1/J1 LINE INTERFACE DEVICE
PM4319 OCTAL T1/E1/J1 Short Haul Line Interface Device
PM4325 Octal Short Haul T1/E1/J1 Low Latency Transport Line Interface
PM4328 Ultraframer DS3/E3/DS2/E2/DS1/E1/DS0
相关代理商/技术参数
参数描述
PM43-150M 功能描述:固定电感器 15uH 20% RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
PM43-150M-RC 功能描述:固定电感器 15uH 20% RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
PM4318 制造商:PMC 制造商全称:PMC 功能描述:OCTAL E1/T1/J1 LINE INTERFACE DEVICE
PM43-180M 功能描述:固定电感器 18 UH 4X4.5X3.2 MM RoHS:否 制造商:AVX 电感:10 uH 容差:20 % 最大直流电流:1 A 最大直流电阻:0.075 Ohms 工作温度范围:- 40 C to + 85 C 自谐振频率:38 MHz Q 最小值:40 尺寸:4.45 mm W x 6.6 mm L x 2.92 mm H 屏蔽:Shielded 端接类型:SMD/SMT 封装 / 箱体:6.6 mm x 4.45 mm
发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

*型号 *数量 厂商 批号 封装
添加更多采购

我的联系方式

*
*
*