SBSLITE Telecom Standard Product Data Sheet
Preliminary
Proprietary and Confidential to PMC-Sierra, Inc., and for its Customers’ Internal Use
Document ID: PMC-2010883, Issue 2
74
OCMP_SRC[1:0]
The OCMP_SRC[1:0] bits select the source for the outgoing connection memory page
information.
OCMP_SRC[1:0]
Source
00
OCMP_VAL register bit
01
OCMP input pin
10
PAGE bit from the active ILC (as determined by the
RWSEL_VAL bit or RWSEL input)
11
Reserved
OCMP_VAL
The OCMP_VAL bit controls the selection of the connection memory page in each Outgoing
Memory Switch Unit, OMSU. When OCMP_VAL is a logic one, connection memory page 1
is selected. When OCMP_VAL is a logic zero, connection memory page 0 is selected.
OCMP_VAL is sampled at the C1 byte position as defined by the receive frame pulse signal
(RC1FP). Changes to the connection memory page selection are synchronized to the frame
boundary of the next frame (in TelecomBus mode), 4 frame multiframe (in SBI mode without
CAS), or 48 frame multiframe (in SBI mode with CAS). This bit is only used when
OCMP_SRC[1:0] = ‘b00.
RWSEL_SRC
The RWSEL_SRC bit selects the source for the selection of which link, the working or the
protect, is active. When RWSEL_SRC is a logic zero, the RWSEL_VAL register bit is used
as the source for selecting the active link. When RWSEL_SRC is a logic one, the RWSEL
input is used as the source for selecting the active link.
RWSEL_VAL
The RWSEL_VAL bit selects between the receive working and protect links when the
RWSEL_SRC is a logic zero. When RWSEL_VAL is a logic one, the working link is
selected and the SBSLITE listens to the data from the RPWRK and RNWRK inputs. When
RWSEL_VAL is a logic zero, the protect link is selected and the SBSLITE listens to the data
from the RPPROT and RNPROT inputs. This bit has no effect when the RWSEL_SRC bit is
a logic one or when the parallel interface is used (PARALLEL_MODE = ‘b1).
Reserved[1]
This bit must be set to a logic zero for correct operation of the SBSLITE.