- 您现在的位置：买卖IC网 > Datasheet目录139 > PMEG3002AELD,315 (NXP Semiconductors)DIODE SCHOTTKY 30V 200MA SOD882D Datasheet资料下载
参数资料
| 型号： | PMEG3002AELD,315 |
| 厂商： | NXP Semiconductors |
| 文件页数： | 4/14页 |
| 文件大小： | 792K |
| 描述： | DIODE SCHOTTKY 30V 200MA SOD882D |
| 标准包装： | 1 |
| 二极管类型： | 肖特基 |
| 电压 - (Vr)（最大）： | 30V |
| 电流 - 平均整流 (Io)： | 200mA |
| 电压 - 在 If 时为正向 (Vf)（最大）： | 480mV @ 200mA |
| 速度： | 小信号 =< 200mA（Io），任意速度 |
| 反向恢复时间(trr)： | 6ns |
| 电流 - 在 Vr 时反向漏电： | 50µA @ 30V |
| 电容@ Vr, F： | 25pF @ 1V，1MHz |
| 安装类型： | 表面贴装 |
| 封装/外壳： | SOD-882D |
| 供应商设备封装： | SOD882D |
| 包装： | 标准包装 |
| 其它名称： | 568-7530-6 |
         PMEG3002AELD All information provided in this document is subject to legal disclaimers. ? NXP B.V. 2011. All rights reserved. Product data sheet Rev. 1 — 19 April 2011 12 of 14 NXP Semiconductors PMEG3002AELD 30 V, 0.2 A low VF MEGA Schottky barrier rectifier 13. Legal information 13.1 Data sheet status [1] Please consult the most recently issued document before initiating or completing a design. [2] The term ‘short data sheet’ is explained in section “Definitions”. [3] The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple device s. The latest product status information is available on the Internet at URL http://www.nxp.com. 13.2 Definitions Draft — The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet — A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification — The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet. 13.3 Disclaimers Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk. Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect. Limiting values — Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license — Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. Document status[1][2] Product status[3] Definition Objective [short] data sheet Development This document contains data from the objecti ve specification for product development. Preliminary [short] data sheet Qualification This document contains data from the preliminary specification. Product [short] data sheet Production This document contains the product specification. |
相关PDF资料 |
PDF描述 |
|---|---|
| PMEG3002EJ,115 | SCHOTTKY RECT 30V 200MA SC-90 |
| PMEG3005EB,115 | SCHOTTKY RECT 30V 0.5A SS-MINI |
| PMEG3005EJ,115 | SCHOTTKY RECT 30V 0.5A SOD323F |
| PMEG3005ELD,315 | DIODE SCHOTTKY 30V 500MA SOD882D |
| PMEG3010BEP,115 | SCHOTTKY RECT 30V 1.0A SOD-128 |
相关代理商/技术参数 |
参数描述 |
|---|---|
| PMEG3002AESFYL | 功能描述:DIODE SCHOTTKY 30V 0.2A SOD962 制造商:nexperia usa inc. 系列:- 包装:剪切带（CT） 零件状态:在售 二极管类型:肖特基 电压 - DC 反向（Vr）（最大值）:30V 电流 - 平均整流（Io）:200mA 不同 If 时的电压 - 正向（Vf:470mV @ 200mA 速度:小信号 =< 200mA（Io），任意速度 反向恢复时间（trr）:1.37ns 不同?Vr 时的电流 - 反向漏电流:80μA @ 30V 不同?Vr，F 时的电容:22pF @ 1V，1MHz 安装类型:表面贴装 封装/外壳:0201（0603 公制） 供应商器件封装:DSN0603-2 工作温度 - 结:150°C（最大） 标准包装:1 |
| PMEG3002EJ | 制造商:NXP Semiconductors 功能描述:DIODE SCHOT RECT 30V 0.2A SOD323 制造商:NXP Semiconductors 功能描述:DIODE, SCHOT RECT, 30V, 0.2A, SOD323 制造商:NXP Semiconductors 功能描述:DIODE, SCHOT RECT, 30V, 0.2A, SOD323, Diode Type:Schottky, Diode Configuration:Single, Repetitive Reverse Voltage Vrrm Max:30V, Forward Current If(AV):200mA, Forward Voltage VF Max:480mV, Forward Surge Current Ifsm Max:2.75A , RoHS Compliant: Yes |
| PMEG3002EJ,115 | 功能描述:肖特基二极管与整流器 30V 0.2A 2-Pin Diode Schottky RoHS:否 制造商:Skyworks Solutions, Inc. 产品:Schottky Diodes 峰值反向电压:2 V 正向连续电流:50 mA 最大浪涌电流: 配置:Crossover Quad 恢复时间: 正向电压下降:370 mV 最大反向漏泄电流: 最大功率耗散:75 mW 工作温度范围:- 65 C to + 150 C 安装风格:SMD/SMT 封装 / 箱体:SOT-143 封装:Reel |
| PMEG3002EJ115 | 制造商:NXP 功能描述: 制造商:NXP Semiconductors 功能描述: |
| PMEG3002ESFYL | 功能描述:DIODE SCHOTTKY 30V 0.2A SOD962 制造商:nexperia usa inc. 系列:- 包装:剪切带（CT） 零件状态:在售 二极管类型:肖特基 电压 - DC 反向（Vr）（最大值）:30V 电流 - 平均整流（Io）:200mA 不同 If 时的电压 - 正向（Vf:535mV @ 200mA 速度:小信号 =< 200mA（Io），任意速度 反向恢复时间（trr）:1.42ns 不同?Vr 时的电流 - 反向漏电流:9μA @ 30V 不同?Vr，F 时的电容:21pF @ 1V，1MHz 安装类型:表面贴装 封装/外壳:0201（0603 公制） 供应商器件封装:DSN0603-2 工作温度 - 结:150°C（最大） 标准包装:1 |
发布紧急采购，3分钟左右您将得到回复。