参数资料
型号: QLPXA263B1C400
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 32-BIT, 400 MHz, RISC PROCESSOR, PBGA294
封装: 13 X 13 MM, 1.4MM PITCH, PLASTIC, TPBGA-294
文件页数: 9/44页
文件大小: 1302K
代理商: QLPXA263B1C400
Package Information
Intel PXA255 Processor Electrical, Mechanical, and Thermal Specification
17
nRESET_OUT
OC
Reset out. (output) Asserted when nRESET is asserted
and deasserts after nRESET is de-asserted but before
the first instruction fetch. nRESET_OUT is also asserted
for “soft” reset events: sleep, watchdog reset, or GPIO
reset.
Driven low during
any reset sequence
- driven high prior to
first fetch.
Driven Low
JTAG and Test Pins
nTRST
IC
JTAG test interface reset. Resets the JTAG/debug port.
If JTAG/debug is used, drive nTRST from low to high
either before or at the same time as nRESET. If JTAG is
not used, nTRST must be either tied to nRESET or tied
low.
Input
TDI
IC
JTAG test data input. (input) Data from the JTAG
controller is sent to the PXA255 processor using this pin.
This pin has an internal pull-up resistor.
Input
TDO
OCZ
JTAG test data output. (output) Data from the PXA255
processor is returned to the JTAG controller using this
pin.
Hi-Z
TMS
IC
JTAG test mode select. (input) Selects the test mode
required from the JTAG controller. This pin has an
internal pull-up resistor.
Input
TCK
IC
JTAG test clock. (input) Clock for all transfers on the
JTAG test interface.
Input
TEST
IC
Test Mode. (input) Reserved. Must be grounded.
Input
TESTCLK
IC
Test Clock. (input) Reserved. Must be grounded.
Input
Power and Ground Pins
VCC
SUP
Positive supply for internal logic. Must be connected
to the low voltage supply on the PCB.
Powered
Note [6]
VSS
SUP
Ground supply for internal logic. Must be connected to
the common ground plane on the PCB.
Grounded
PLL_VCC
SUP
Positive supply for PLLs and oscillators. Must be
connected to the common low voltage supply.
Powered
Note [6]
PLL_VSS
SUP
Ground supply for the PLL. Must be connected to
common ground plane on the PCB.
Grounded
VCCQ
SUP
Positive supply for all CMOS I/O except memory bus
and PCMCIA pins. Must be connected to the common
3.3v supply on the PCB.
Powered
Note [7]
VSSQ
SUP
Ground supply for all CMOS I/O except memory bus
and PCMCIA pins. Must be connected to the common
ground plane on the PCB.
Grounded
VCCN
SUP
Positive supply for memory bus and PCMCIA pins.
Must be connected to the common 3.3v or 2.5v supply on
the PCB.
Powered
Note [7]
VSSN
SUP
Ground supply for memory bus and PCMCIA pins.
Must be connected to the common ground plane on the
PCB.
Grounded
Table 3. Pin and Signal Descriptions for the PXA255 Processor (Sheet 9 of 9)
Pin Name
Type
Signal Descriptions
Reset State
Sleep State
相关PDF资料
PDF描述
QL5810-66CPTN196I PCI BUS CONTROLLER, PBGA196
QL5820-33BPTN196C PCI BUS CONTROLLER, PBGA196
QL5842-33BPSN484M PCI BUS CONTROLLER, PBGA484
QT83C154XXX-L 8-BIT, MROM, 6 MHz, MICROCONTROLLER, PQFP44
QC87C251SQ 8-BIT, UVPROM, 12 MHz, MICROCONTROLLER, CDIP40
相关代理商/技术参数
参数描述
QLQGT3T131TA 制造商:Panasonic Industrial Company 功能描述:COIL
QLS08ZH-N 制造商:Power-One 功能描述:QUARTER BRICK DCDC - Bulk
QLS08ZH-NT 功能描述:DC/DC转换器 RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸:
QLS-1 制造商:LAUREL ELECTRONICS 功能描述:CURRENT LOOP SPLITTER RETRANSM 制造商:LAUREL ELECTRONICS 功能描述:CURRENT LOOP SPLITTER RETRANSMITTER; Accuracy: 0.02%; Input Type:Selectable Current; No. of Output Channels:4; Output Type:Selectable Current; Power Consumption:3.5W
QLS12ZG-NT 功能描述:DC/DC转换器 5V/12A OUT NEG-LOGIC QUARTER BRICK RoHS:否 制造商:Murata 产品: 输出功率: 输入电压范围:3.6 V to 5.5 V 输入电压(标称): 输出端数量:1 输出电压(通道 1):3.3 V 输出电流(通道 1):600 mA 输出电压(通道 2): 输出电流(通道 2): 安装风格:SMD/SMT 封装 / 箱体尺寸: