参数资料
型号: R5F212BASDFP
元件分类: 微控制器/微处理器
英文描述: 16-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PQFP48
封装: 10 X 10 MM, 0.50 MM PITCH, PLASTIC, LQFP-48
文件页数: 13/138页
文件大小: 492K
代理商: R5F212BASDFP
198
4317K–AVR–03/2013
AT90PWM2/3/2B/3B
Figure 18-5. Data OverRun example
The Parity Error (UPE) Flag indicates that the next frame in the receive buffer had a Parity Error
when received. If Parity Check is not enabled the UPE bit will always be read zero. For compati-
bility with future devices, always set this bit to zero when writing to UCSRA. For more details see
18.7.5
Parity Checker
The Parity Checker is active when the high USART Parity mode (UPM1) bit is set. Type of Parity
Check to be performed (odd or even) is selected by the UPM0 bit. When enabled, the Parity
Checker calculates the parity of the data bits in incoming frames and compares the result with
the parity bit from the serial frame. The result of the check is stored in the receive buffer together
with the received data and stop bits. The Parity Error (UPE) flag can then be read by software to
check if the frame had a Parity Error.
The UPE bit is set if the next character that can be read from the receive buffer had a Parity
Error when received and the Parity Checking was enabled at that point (UPM1 = 1). This bit is
valid until the receive buffer (UDR) is read.
18.7.6
Disabling the Receiver
In contrast to the Transmitter, disabling of the Receiver will be immediate. Data from ongoing
receptions will therefore be lost. When disabled (i.e., the RXEN is set to zero) the Receiver will
no longer override the normal function of the RxD port pin. The Receiver buffer FIFO will be
flushed when the Receiver is disabled. Remaining data in the buffer will be lost
18.7.7
Flushing the Receive Buffer
The receiver buffer FIFO will be flushed when the Receiver is disabled, i.e., the buffer will be
emptied of its contents. Unread data will be lost. If the buffer has to be flushed during normal
operation, due to for instance an error condition, read the UDR I/O location until the RXC flag is
cleared.
The following code example shows how to flush the receive buffer.
CH1
CH2
CH3
RxD
RxC
DOR
t
Software Access
to Receive buffer
RxC=1
UDR=CH1
DOR=0
RxC=1
UDR=CH2
DOR=0
RxC=1
UDR=XX
DOR=1
相关PDF资料
PDF描述
R5F212BASNFA 16-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PQFP48
R5F212ACSDFP 16-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PQFP48
R5F212BCSNFP 16-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PQFP48
R5F212BASNFP 16-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PQFP48
R5F212ACSNFP 16-BIT, FLASH, 20 MHz, RISC MICROCONTROLLER, PQFP48
相关代理商/技术参数
参数描述
R5F212BASDFP#U0 制造商:Renesas Electronics Corporation 功能描述:MCU 16-Bit R8C CISC 96KB Flash 2.5V/3.3V/5V 64-Pin LQFP 制造商:Renesas Electronics Corporation 功能描述:MCU 16-bit R8C CISC 96KB Flash 2.5V/3.3V/5V 64-Pin LQFP
R5F212BASDFP#V0 功能描述:IC R8C/2B MCU FLASH 64LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:R8C/2x/2B 标准包装:250 系列:56F8xxx 核心处理器:56800E 芯体尺寸:16-位 速度:60MHz 连通性:CAN,SCI,SPI 外围设备:POR,PWM,温度传感器,WDT 输入/输出数:21 程序存储器容量:40KB(20K x 16) 程序存储器类型:闪存 EEPROM 大小:- RAM 容量:6K x 16 电压 - 电源 (Vcc/Vdd):2.25 V ~ 3.6 V 数据转换器:A/D 6x12b 振荡器型:内部 工作温度:-40°C ~ 125°C 封装/外壳:48-LQFP 包装:托盘 配用:MC56F8323EVME-ND - BOARD EVALUATION MC56F8323
R5F212BASDFP#V2 制造商:Renesas Electronics Corporation 功能描述:R8C/2B 96+2/7 64LQFP 10X10 -40 制造商:Renesas Electronics Corporation 功能描述:R8C/2B 96+2/7 64LQFP 10X10 -40 TO +85 - Trays 制造商:Renesas Electronics Corporation 功能描述:IC MCU 16BIT 96KB FLASH 64LQFP
R5F212BASDXXXFA 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:RENESAS MCU R8C FAMILY / R8C/2x SERIES
R5F212BASDXXXFP 制造商:RENESAS 制造商全称:Renesas Technology Corp 功能描述:RENESAS MCU R8C FAMILY / R8C/2x SERIES