参数资料
型号: R5F2L3ACCNFP
元件分类: 微控制器/微处理器
英文描述: 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP100
封装: 14 X 14 MM, 0.50 MM PITCH, PLASTIC, LQFP-100
文件页数: 20/74页
文件大小: 959K
代理商: R5F2L3ACCNFP
28
2588F–AVR–06/2013
ATtiny261/461/861
When the PLL output is selected as clock source, the start-up times are determined by SUT fuse
bits as shown in Table 6-5.
6.2.3
Calibrated Internal 8 MHz Oscillator
By default, the Internal Oscillator provides an approximately 8 MHz clock signal. Though voltage
and temperature dependent, this clock can be very accurately calibrated by the user. See Table
shipped with the CKDIV8 Fuse programmed. See “System Clock Prescaler” on page 31 for
more details.
This clock may be selected as the system clock by programming the CKSEL Fuses as shown in
Table 6-6. If selected, it will operate with no external components. During reset, hardware loads
the pre-programmed calibration value into the OSCCAL Register and thereby automatically cal-
ibrates the RC Oscillator. The accuracy of this calibration is shown as Factory calibration in
Notes:
1. The device is shipped with this option selected.
2. If the oscillator frequency exceeds the specification of the device (depends on VCC), the
CKDIV8 Fuse can be programmed to divide the internal frequency by 8.
When this oscillator is selected, start-up times are determined by SUT fuses as shown in Table
Note:
1. If the RSTDISBL fuse is programmed, this start-up time will be increased to 14CK + 4 ms to
ensure programming mode can be entered.
2. The device is shipped with this option selected.
Table 6-5.
Start-up Times for the PLLCK
SUT1:0
Start-up Time from
Power Down
Additional Delay from
Power-On-Reset (V
CC = 5.0V)
Recommended
usage
00
14CK + 1K (1024) + 4 ms
4 ms
BOD enabled
01
14CK + 16K (16384) + 4 ms
4 ms
Fast rising power
10
14CK + 1K (1024) + 64 ms
4 ms
Slowly rising power
11
14CK + 16K (16384) + 64 ms
4 ms
Slowly rising power
Table 6-6.
Internal Calibrated RC Oscillator Operating Modes
CKSEL3:0
Nominal Frequency
0010
8.0 MHz
Table 6-7.
Start-up Times for the Internal Calibrated RC Oscillator Clock Selection
SUT1:0
Start-up Time
from Power-down
Additional Delay from
Reset (VCC = 5.0V)
Recommended
Usage
00
6 CK
14CK(1)
BOD enabled
01
6 CK
14CK + 4 ms
Fast rising power
6 CK
14CK + 64 ms
Slowly rising power
11
Reserved
相关PDF资料
PDF描述
R5F2L38ACNFA 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
R5F2L38CCNFP 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
R5F2L387CDFP 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
R5F2L387CNFP 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP80
R5F2L368CDFP 8-BIT, FLASH, 20 MHz, MICROCONTROLLER, PQFP64
相关代理商/技术参数
参数描述
R5F2L3ACCNFP#30 制造商:Renesas Electronics Corporation 功能描述:IC MCU 16BIT 128KB FLASH 100LQFP
R5F2L3ACCNFP#U1 制造商:Renesas Electronics Corporation 功能描述:
R5F2L3ACCNFP#V0 功能描述:MCU 1KB FLASH 128K ROM 100-LQFP RoHS:是 类别:集成电路 (IC) >> 嵌入式 - 微控制器, 系列:R8C/Lx/3AC 标准包装:250 系列:80C 核心处理器:8051 芯体尺寸:8-位 速度:16MHz 连通性:EBI/EMI,I²C,UART/USART 外围设备:POR,PWM,WDT 输入/输出数:40 程序存储器容量:- 程序存储器类型:ROMless EEPROM 大小:- RAM 容量:256 x 8 电压 - 电源 (Vcc/Vdd):4.5 V ~ 5.5 V 数据转换器:A/D 8x10b 振荡器型:内部 工作温度:-40°C ~ 85°C 封装/外壳:68-LCC(J 形引线) 包装:带卷 (TR)
R5F2L3ACMDFA#U0 制造商:Renesas Electronics Corporation 功能描述:R8C/L3AM 128+4/10 100QFP 14X20 制造商:Renesas Electronics Corporation 功能描述:R8C/L3AM 128+4/10 100QFP 14X20 -40 TO +85 - Trays 制造商:Renesas Electronics Corporation 功能描述:IC MCU 16BIT 128KB FLASH 100LQFP
R5F2L3ACMNFA#U0 制造商:Renesas Electronics Corporation 功能描述:R8C/L3AM 128+4/10 100QFP 14X20 制造商:Renesas Electronics Corporation 功能描述:R8C/L3AM 128+4/10 100QFP 14X20 -20 TO +85 - Trays 制造商:Renesas Electronics Corporation 功能描述:IC MCU 16BIT 128KB FLASH 100LQFP 制造商:Renesas Electronics Corporation 功能描述:MCU,R8C,16bit,20MHz,128KB Flash,QFP100