参数资料
型号: RPIXP2800BC
厂商: INTEL CORP
元件分类: 微控制器/微处理器
英文描述: 32-BIT, 650 MHz, RISC PROCESSOR, PBGA1356
封装: 37.50 X 37.50 MM, 1 MM PITCH, FCBGA-1356
文件页数: 64/130页
文件大小: 1782K
代理商: RPIXP2800BC
Intel IXP2800 and IXP2850 Network Processors
Signal Description
Datasheet
39
3.2.9
Power Supply Pins
CLK_PLL_BYP
I
PLL Bypass Test Mode. When asserted, the
IXP2800/IXP2850 uses the external clock inputs
(CLK_REF_CLK in place of PLL clocks. This pin should be
tied to logical 0 during normal operation.
1
CLK_NRESET
I
Master Reset Input. Active low.
All configuration strap options are latched on the
deassertion of this signal. This signal must be toggled even
in PCI BOOT mode to latch the configuration straps
options.
1
CLK_NRESET_OUT
O
Reset Output. Active low. This output is controlled by
configuration pin SP_AD[7] listed in Table 16 Configuration
1
Total
7
Table 14. Power Supply Pins (Sheet 1 of 2)
Signal Names
Total
Pin Descriptions
VCC_CLK
1
2.5 V supply. May be tied to the same board level supply as VCC25V.
VCC_FUSE
4
1.35/1.3/1.2 V supply for the fuse logic. May be tied to the same board level
supply as VCC. The fuse circuit supply has been isolated from VCC because
this supply must be elevated during the fuse programming sequence, which
only occurs during final manufacturing test (not user accessible).
VREFHI_CLK
1
These pins should be tied to VSS (logical 0).
VREFLO_CLK
1
These pins should be tied to VSS (logical 0).
VCC_PLL
1
1.35/1.3/1.2 V supply for the on-chip PLL. If the board level supply is
exceptionally clean, this supply could be tied to the same board level supply as
VCC. Given that most applications witness substantial noise on VCC, the
VCC_PLL should be generated by filtering VCC with an LC network
VCC
78
Core power supply.
VSS
371
Core ground.
VCC25V
28
SPI-4 supply (also for PCI).
VCCA_FC
1
DLL power. Should be generated by filtering VCC with an LC network
VCCA_SPI4
1
DLL power. Should be generated by filtering VCC with an LC network
VREFHI
2
SPI-4/flow reference voltage.
VREFLO
2
SPI-4/flow reference voltage.
VCC33
4
GPIO, JTAG, SP power.
VCC33_PCI
12
PCI power supply.
VDDQ
101
QDR power supply.
PAS0_VCCA
1
DLL power. Should be generated by filtering VCC with an LC network
Table 13. Clock Signals (Sheet 2 of 2)
Signal Name
I/O
Description
Number
相关PDF资料
PDF描述
RPIXP2850BB 32-BIT, 1400 MHz, RISC PROCESSOR, PBGA1356
RPM-075PTT86 PHOTO TRANSISTOR DETECTOR
RS5C316B-E2 0 TIMER(S), REAL TIME CLOCK, PDSO8
RS5C317B-E1 0 TIMER(S), REAL TIME CLOCK, PDSO14
RS5C317B-E2 0 TIMER(S), REAL TIME CLOCK, PDSO14
相关代理商/技术参数
参数描述
RPIXP2805ABR 880603 制造商:Intel 功能描述:CPU - Central Processing Units IXP2805 Network Proc 1GHz FCPGA2-1356
RPIXP2805AC 制造商:Intel 功能描述:DEVICE CON IXP2805AC 1.40G PBG
RPIXP2805AC S LA7E 制造商:Intel 功能描述:DEVICE CON IXP2805AC 1.40G PBG
RPIXP2805AC-889961 制造商:Intel 功能描述:ITLRPIXP2805AC-889961 MM# 889961 / NETWO
RPIXP2805ACR S LA7D 制造商:Intel 功能描述:DEVICE CON IXP2805ACR 1.40G PB