参数资料
型号: S1C63158B0A010R
元件分类: 微控制器/微处理器
英文描述: 4-BIT, FLASH, 4 MHz, MICROCONTROLLER, PBGA
文件页数: 130/159页
文件大小: 1200K
代理商: S1C63158B0A010R
64
EPSON
S1C63808 TECHNICAL MANUAL
CHAPTER 4: PERIPHERAL CIRCUITS AND OPERATION (Programmable Timer)
4.9.6 Interrupt function
The programmable timer can generate an interrupt due to an underflow of each timer. See Figure 4.9.2.1
for the interrupt timing.
An underflow of timer x sets the corresponding interrupt factor flag IPTx to "1", and generates an inter-
rupt. The interrupt can also be masked by setting the corresponding interrupt mask register EIPTx.
However, the interrupt factor flag is set to "1" by an underflow of the corresponding timer regardless of
the interrupt mask register setting.
When timers 0 and 1 are used as a 16-bit timer, an interrupt is generated by an underflow of timer 1. In
this case, IPT0 is not set to "1" by a timer 0 underflow.
4.9.7 Control of TOUT output
The programmable timer can generate a TOUT signal due to an underflow of a timer. The TOUT signal is
generated by dividing the underflows in 1/2. It is possible to select which timer's underflow is to be used
by the TOUT output channel selection register CHSEL0.
Table 4.9.7.1 Selecting a timer for TOUT output
CHSEL0
1
0
TOUT output timer
Timer 1
Timer 0
Select timer 1 when generating the TOUT signal from the 16-bit timer output.
The TOUT signal can be output from the R02 output port terminal. Programmable clocks can be supplied
to external devices.
Figure 4.9.7.1 shows the configuration of the output port R02.
Data
bus
Register
PTOUT
Register
R02
TOUT
R02
(TOUT)
Register
R02HIZ
Fig. 4.9.7.1 Configuration of R02
The output of a TOUT signal is controlled by the PTOUT register. When "1" is written to the PTOUT
register, the TOUT signal is output from the R02 output port terminal and when "0" is written, the
terminal goes to a high (VDD) level. However, the data register R02 must always be "1" and the high
impedance control register R02HIZ must always be "0" (data output state).
Since the TOUT signal is generated asynchronously from the PTOUT register, a hazard within 1/2 cycle is
generated when the signal is turned on and off by setting the register.
Figure 4.9.7.2 shows the output waveform of the TOUT signal.
R02HIZ register
R02 register
PTOUT register
TOUT output
Fix at "0"
Fix at "1"
"1"
"0"
Fig. 4.9.7.2 Output waveform of the TOUT signal
相关PDF资料
PDF描述
S1C7XXXF00E10C 16-BIT, 90 MHz, RISC MICROCONTROLLER, PQFP
ST72361AR9TA 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PQFP64
ST72361J9TA 8-BIT, FLASH, 8 MHz, MICROCONTROLLER, PQFP44
S-7750C02XX-HCT1 SPECIALTY MICROPROCESSOR CIRCUIT, PBGA16
S-7750C23XX-HCT1 SPECIALTY MICROPROCESSOR CIRCUIT, PBGA16
相关代理商/技术参数
参数描述
S1C63408 制造商:EPSON 制造商全称:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63557D04Q000 制造商:Seiko Instruments Inc (SII) 功能描述:EPSON MCU 4BIT
S1C63567 制造商:EPSON 制造商全称:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63616 制造商:EPSON 制造商全称:EPSON 功能描述:4-bit Single Chip Microcomputer
S1C63632 制造商:EPSON 制造商全称:EPSON 功能描述:4-bit Single Chip Microcomputer