参数资料
型号: SAB-C167CS-LMCA
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 16-BIT, 25 MHz, MICROCONTROLLER, PQFP144
封装: PLASTIC, MQFP-144
文件页数: 20/84页
文件大小: 1082K
代理商: SAB-C167CS-LMCA
C167CS-4R
C167CS-L
Data Sheet
23
V2.2, 2001-08
Capture/Compare (CAPCOM) Units
The CAPCOM units support generation and control of timing sequences on up to
32 channels with a maximum resolution of 16 TCL. The CAPCOM units are typically
used to handle high speed I/O tasks such as pulse and waveform generation, pulse
width modulation (PMW), Digital to Analog (D/A) conversion, software timing, or time
recording relative to external events.
Four 16-bit timers (T0/T1, T7/T8) with reload registers provide two independent time
bases for the capture/compare register array.
The input clock for the timers is programmable to several prescaled values of the internal
system clock, or may be derived from an overflow/underflow of timer T6 in module GPT2.
This provides a wide range of variation for the timer period and resolution and allows
precise adjustments to the application specific requirements. In addition, external count
inputs for CAPCOM timers T0 and T7 allow event scheduling for the capture/compare
registers relative to external events.
Both of the two capture/compare register arrays contain 16 dual purpose capture/
compare registers, each of which may be individually allocated to either CAPCOM timer
T0 or T1 (T7 or T8, respectively), and programmed for capture or compare function.
Each register has one port pin associated with it which serves as an input pin for
triggering the capture function, or as an output pin to indicate the occurrence of a
compare event.
When a capture/compare register has been selected for capture mode, the current
contents of the allocated timer will be latched (‘capture’d) into the capture/compare
register in response to an external event at the port pin which is associated with this
register. In addition, a specific interrupt request for this capture/compare register is
generated. Either a positive, a negative, or both a positive and a negative external signal
transition at the pin can be selected as the triggering event. The contents of all registers
which have been selected for one of the five compare modes are continuously compared
with the contents of the allocated timers. When a match occurs between the timer value
and the value in a capture/compare register, specific actions will be taken based on the
selected compare mode.
相关PDF资料
PDF描述
SAB-C167CS-4R33M 16-BIT, MROM, 33 MHz, MICROCONTROLLER, PQFP144
SAB-C167CS-4RM 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP144
SAK-C167CS-LM 16-BIT, 25 MHz, MICROCONTROLLER, PQFP144
SAB-C167CS-4R40M 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP144
SAK-C167CS-4R40M 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP144
相关代理商/技术参数
参数描述
SABC167CSLMCA+ 制造商:Infineon Technologies AG 功能描述:
SABC167CSLMCA+X 制造商:Infineon Technologies AG 功能描述:MCU 16-Bit C166 CISC/RISC ROMLess 3.3V/5V 144-Pin MQFP
SAB-C167SR-L33M 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller
SAB-C167SR-LM 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit CMOS Single-Chip Microcontroller
SABC167SR-LM 制造商:Infineon Technologies AG 功能描述:MCU 16-bit C166 CISC/RISC ROMLess 5V 144-Pin MQFP