参数资料
型号: SAB-C167CS-LMCA
厂商: INFINEON TECHNOLOGIES AG
元件分类: 微控制器/微处理器
英文描述: 16-BIT, 25 MHz, MICROCONTROLLER, PQFP144
封装: PLASTIC, MQFP-144
文件页数: 51/84页
文件大小: 1082K
代理商: SAB-C167CS-LMCA
C167CS-4R
C167CS-L
Data Sheet
51
V2.2, 2001-08
Input leakage current (all other)
IOZ2 CC –
±500
nA
0.45 V <
VIN
<
VDD
RSTIN inactive current6)
IRSTH
7)
-10
A
VIN = VIH1
RSTIN active current6)
IRSTL
8)
-100
A
VIN = VIL
READY/RD/WR inact. current9)
IRWH
-40
A
VOUT = 2.4 V
READY/RD/WR active current9)
IRWL
-500
A
VOUT = VOLmax
ALE inactive current9)
40
A
VOUT = VOLmax
ALE active current9)
IALEH
500
A
VOUT = 2.4 V
Port 6 inactive current9)
IP6H
-40
A
VOUT = 2.4 V
Port 6 active current9)
-500
A
VOUT = VOL1max
PORT0 configuration current10)
IP0H
-10
A
VIN = VIHmin
-100
A
VIN = VILmax
XTAL1 input current
IIL
CC –
±20
A0 V < VIN < VDD
Pin capacitance11)
(digital inputs/outputs)
CIO CC –
10
pF
f = 1 MHz
TA = 25 °C
1) Keeping signal levels within the levels specified in this table, ensures operation without overload conditions.
For signal levels outside these specifications also refer to the specification of the overload current
IOV.
2) For pin RSTIN this specification is only valid in bidirectional reset mode.
3) The maximum deliverable output current of a port driver depends on the selected output driver mode, see
Table 10, Current Limits for Port Output Drivers. The limit for pin groups must be respected.
4) As a rule, with decreasing output current the output levels approach the respective supply level (V
OL VSS,
VOH VDD). However, only the levels for nominal output currents are guaranteed.
5) This specification is not valid for outputs which are switched to open drain mode. In this case the respective
output will float and the voltage results from the external circuitry.
6) These parameters describe the RSTIN pullup, which equals a resistance of ca. 50 to 250 k.
7) The maximum current may be drawn while the respective signal line remains inactive.
8) The minimum current must be drawn in order to drive the respective signal line active.
9) This specification is valid during Reset and during Hold-mode or Adapt-mode. During Hold-mode Port 6 pins
are only affected, if they are used (configured) for CS output and the open drain function is not enabled. The
READY-pullup is always active, except for Powerdown mode.
10) This specification is valid during Reset and during Adapt-mode.
11) Not 100% tested, guaranteed by design and characterization.
DC Characteristics (cont’d)
(Operating Conditions apply)1)
Parameter
Symbol
Limit Values
Unit Test Condition
min.
max.
相关PDF资料
PDF描述
SAB-C167CS-4R33M 16-BIT, MROM, 33 MHz, MICROCONTROLLER, PQFP144
SAB-C167CS-4RM 16-BIT, MROM, 25 MHz, MICROCONTROLLER, PQFP144
SAK-C167CS-LM 16-BIT, 25 MHz, MICROCONTROLLER, PQFP144
SAB-C167CS-4R40M 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP144
SAK-C167CS-4R40M 16-BIT, MROM, 40 MHz, MICROCONTROLLER, PQFP144
相关代理商/技术参数
参数描述
SABC167CSLMCA+ 制造商:Infineon Technologies AG 功能描述:
SABC167CSLMCA+X 制造商:Infineon Technologies AG 功能描述:MCU 16-Bit C166 CISC/RISC ROMLess 3.3V/5V 144-Pin MQFP
SAB-C167SR-L33M 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit Single-Chip Microcontroller
SAB-C167SR-LM 制造商:INFINEON 制造商全称:Infineon Technologies AG 功能描述:16-Bit CMOS Single-Chip Microcontroller
SABC167SR-LM 制造商:Infineon Technologies AG 功能描述:MCU 16-bit C166 CISC/RISC ROMLess 5V 144-Pin MQFP